Hobbywing XRotor Pro 60A/80A/100A HV V3 ESC

Contents

Hobbywing XRotor Pro HV ESC Instruction Manual

Models: 60A, 80A, 100A High-Voltage Electronic Speed Controllers (V3)

Brand: Hobbywing

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your Hobbywing XRotor Pro High-Voltage (HV) Electronic Speed Controller (ESC). Designed for multi-rotor applications, these ESCs offer advanced features for improved performance and reliability. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

Hobbywing XRotor Pro 60A, 80A, and 100A HV ESCs with wires
Figure 1: Overview of Hobbywing XRotor Pro 60A, 80A, and 100A HV ESCs, showing their compact design and wiring. The image displays the 'Hobbywing XRotor 60A 80A 100A HV' branding.

2. Key Features

  • Optimized Throttle Response: A special core program for multi-rotor controllers significantly enhances throttle response, providing precise control.
  • DEO Technology: Driving Efficiency Optimization (DEO) technology is integrated to significantly improve throttle linearity and overall driving efficiency.
  • Adaptive Settings: Features highly intelligent and adaptive default settings, including auto-adjusting timing, to meet the requirements of almost all multi-rotor applications.
  • Reduced Signal Crosstalk: The twisted-pair design of the throttle signal cable effectively minimizes crosstalk produced during signal transmission, contributing to more stable and reliable flight.
  • Wide Compatibility: Compatible with various flight-control systems and supports a signal frequency of up to 621Hz. (Note: All throttle signals over 500Hz are considered non-standard signals).
  • Integrated LED: A high-light LED position on the XRotor Pro ESC (applicable to 60A, 80A, and 100A models) saves the effort of mounting any extra color lights on multi-rotors.
  • DIP Switch Control: Convenient DIP switches located at the bottom of the ESC allow direct control over the ESC's ON/OFF status, the color of the LED light, activation/deactivation of the DEO function, and the motor rotation direction.

3. Specifications

The Hobbywing XRotor Pro HV ESCs are available in 60A, 80A, and 100A variants. Detailed specifications for the 80A and 100A models are provided below. The 60A model shares similar characteristics with adjusted current ratings.

Specification XRotor Pro 80A HV V3 XRotor Pro 100A HV V3
Model Pro-80A-HV-RTF-V3 Pro-100A-HV-RTF-V3
Drive Method BLDC BLDC
Structure Metal shell + plastic bottom shell Metal shell + plastic bottom shell
Continuous Current 80A 100A
Instantaneous Current (10s) 100A 120A
BEC Output None None
Lithium Battery Cells 6-14S 6-14S
Parameter Programming DEO (on/off) DEO (on/off)
Weight 118g 136g
Size (without ear length) 86.1x42x20.5mm 86.1x42x20.5mm

Note: Specifications for the 60A model are similar, with a continuous current of 60A and corresponding instantaneous current ratings.

4. Installation

Proper installation is crucial for the performance and safety of your multi-rotor system. Follow these guidelines carefully:

  1. Mounting: Securely mount the ESC to your multi-rotor frame using appropriate fasteners or double-sided tape. Ensure adequate airflow around the ESC for cooling, especially during operation.
  2. Motor Connection: Connect the three motor wires from the ESC to the corresponding motor phases. The order of connection determines the motor rotation direction. If the motor rotates in the wrong direction, swap any two of the three motor wires.
  3. Power Connection: Connect the main power input wires (typically red and black) from the ESC to your battery or power distribution board (PDB). Ensure correct polarity (red to positive, black to negative). These are high-voltage ESCs, so verify your battery voltage is within the specified 6-14S LiPo range.
  4. Signal Cable Connection: Connect the twisted-pair throttle signal cable from the ESC to the appropriate channel on your flight controller.
  5. DIP Switch Configuration: Before initial power-up, configure the DIP switches located on the bottom of the ESC according to your specific requirements for DEO function, LED color, and motor rotation. Refer to Section 5 for detailed settings.
Close-up of an XRotor Pro ESC showing power and signal wiring
Figure 2: Close-up view of an XRotor Pro ESC, illustrating the main power and signal wiring connections.
Bottom view of an XRotor Pro ESC showing DIP switches and regulatory marks
Figure 3: Bottom view of the ESC, highlighting the location of the DIP switches for configuration and regulatory markings (HOBBYWING RoHS CE FC MADE IN CHINA).

5. Operation

Once installed, follow these steps for initial setup and operation:

  1. Throttle Range Calibration:
    • Turn on your transmitter and set the throttle stick to its maximum position.
    • Connect the battery to the ESC. You will hear a series of beeps indicating the ESC is powering up.
    • When you hear a distinct confirmation tone, immediately move the throttle stick to its minimum position.
    • Another series of beeps will confirm that the throttle range calibration is complete.
    • Disconnect the battery. The ESC is now calibrated and ready for use.
  2. DIP Switch Settings: The DIP switches allow customization of several ESC parameters. Refer to the diagrams below for specific settings and their functions.
DIP switch settings diagram for DEO function and motor rotation
Figure 4: DIP switch configuration for DEO (Driving Efficiency Optimization) function and motor rotation direction. Consult this diagram to set your desired motor behavior.
DIP switch settings diagram for LED color and ON/OFF status
Figure 5: DIP switch configuration for LED light color and ON/OFF status. Use this diagram to customize the visual feedback from your ESC.

Important: Always disconnect the battery after use and before making any changes to wiring or DIP switch settings to prevent accidental activation or damage.

6. Maintenance

To ensure the longevity and optimal performance of your ESC, consider the following maintenance tips:

  • Regular Inspection: Periodically check all wires and connectors for signs of wear, fraying, loose connections, or corrosion. Replace any damaged components immediately.
  • Cleaning: Keep the ESC free from dust, dirt, and moisture. Use a soft brush or compressed air for cleaning. Avoid using liquid cleaners or solvents, as these can damage internal components.
  • Cooling: Ensure the ESC has adequate ventilation during operation to prevent overheating. Do not obstruct the heatsink or enclose the ESC in a way that restricts airflow.
  • Storage: Store the ESC in a dry, cool place away from direct sunlight, extreme temperatures, and corrosive materials.

7. Troubleshooting

Here are some common issues you might encounter and their potential solutions:

Problem Possible Cause Solution
Motor does not spin or stutters Incorrect motor wiring, uncalibrated throttle range, faulty motor/ESC, low battery voltage. Check all three motor wire connections. Perform throttle range calibration (Section 5). Ensure battery is charged. Test with a different motor or ESC if possible to isolate the issue.
Motor spins in wrong direction Incorrect motor phase connection. Swap any two of the three motor wires connected to the ESC. Alternatively, adjust motor rotation via the DIP switches if configured for this function (refer to Figure 4).
ESC overheats Insufficient cooling, excessive load on the motor, incorrect motor timing settings, short circuit. Ensure proper airflow around the ESC. Reduce load if possible (e.g., smaller propeller). Check motor timing settings (if adjustable via flight controller or programming card). Inspect for any short circuits.
No response from ESC No power to ESC, faulty signal cable connection, damaged ESC, incorrect flight controller setup. Check battery connection and voltage. Inspect the signal cable for damage and ensure it's correctly plugged into the flight controller. Verify flight controller output settings.

8. User Tips

  • Pre-Flight Checks: Always perform a thorough pre-flight check of all connections, wiring, and ESC settings before each flight to ensure everything is secure and functioning correctly.
  • Battery Health: For optimal performance and to prevent issues, ensure your LiPo battery is fully charged, balanced, and in good overall health. Avoid using damaged or over-discharged batteries.
  • DIP Switch Adjustment: When adjusting the small DIP switches, use a fine-tipped, non-conductive tool (like a plastic toothpick) to avoid damaging the switches or shorting components.
  • Current Monitoring: Consider integrating a current sensor into your system to monitor the actual power draw. This helps prevent overloading the ESCs and provides valuable data for optimizing your setup.

9. Warranty and Support

For specific warranty information, technical support, or service inquiries related to your Hobbywing XRotor Pro HV ESC, please contact your authorized retailer or refer to the official Hobbywing website for their support channels. It is recommended to keep your proof of purchase, such as a receipt or order confirmation, as it may be required for any warranty claims.

Hobbywing products are engineered for high performance and reliability. Adhering to the instructions and guidelines provided in this manual will help ensure the best possible experience and longevity for your Electronic Speed Controller.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.