XINYI Sini Audio XY-C50L

Contents

XINYI Sini Audio Digital Power Amplifier Board User Manual

Models: XY-C50L, XY-T50L, XY-T100H, and other variants

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your XINYI Sini Audio Digital Power Amplifier Board. These modules are designed to provide high-quality audio amplification for various applications, featuring Bluetooth connectivity and different power output configurations. Please read this manual thoroughly before use to ensure proper functionality and safety.

Safety Information

  • Ensure the power supply voltage (DC: 5-24V or DC: 9-24V, depending on model) matches the requirements of your specific amplifier board. Using an incorrect voltage can damage the device.
  • Always disconnect power before making any connections or disconnections to prevent electrical shock or damage.
  • Avoid short-circuiting the speaker outputs or power input terminals.
  • Do not expose the amplifier board to moisture, extreme temperatures, or direct sunlight.
  • Handle the board with care to avoid damaging electronic components.
  • Keep out of reach of children.

Package Contents

Please check the contents of your package. Depending on the specific model purchased, it typically includes:

  • 1 x XINYI Sini Audio Digital Power Amplifier Board
  • Potentiometer knobs (if applicable to model)
  • Mounting hardware (screws, standoffs - may vary)

Note: Additional cables (power supply, audio input, speaker wires) are usually not included and must be sourced separately.

Specifications

FeatureDescription
BrandXINYI Sini Audio
Model NumbersXY-AP100L, XY-AP100H, XY-C50L, XY-C50H, XY-C100L, XY-C100H, XY-T50L, XY-T50H, XY-T100L, XY-T100H, XY-W50L, XY-W50H, XY-W100L, XY-S100L, XY-S100H, XY-E100L, XY-C15H, XY-BDT, XY-E30H
Bluetooth VersionBT5.0 (Bluetooth-compatible)
Channel Configuration2.0 Stereo (Dual Channel), 2.1 (Stereo + Subwoofer)
Output Power (Typical)50W*2, 100W*2, 50W*2+100W, 20W*2, 15W*2+30W (varies by model)
Power InputDC 5-24V or DC 9-24V (check specific model)
Audio Input OptionsAUX IN, USB Audio, Bluetooth
MaterialPVC
FeaturesVolume control, Treble/Bass tuning (on select models), HIFI Power Amplifier
Dimensions (Approx.)
  • XY-C50L: 48mm x 56mm
  • XY-T100H: 58mm x 81mm
  • XY-S100H: 93mm x 97mm
  • XY-E100L: 67mm x 57mm
  • XY-C15H: 47mm x 47mm
  • XY-AP100L: 56mm x 56mm
  • XY-W50L: 71mm x 50mm
  • XY-S100L: 93mm x 72mm

For a visual overview of various models and their dimensions, refer to the image below:

Overview of various XINYI Sini Audio Digital Power Amplifier Board models, showcasing different configurations and dimensions.
Figure 1: Overview of various XINYI Sini Audio Digital Power Amplifier Board models.

Setup Instructions

Follow these steps to set up your amplifier board. Specific connections may vary slightly between models, but the general principles apply.

  1. Power Connection: Connect a DC power supply (5-24V or 9-24V, depending on your model) to the 'DC IN' or 'POWER' terminals. Ensure correct polarity (+ and -).
  2. Speaker Connection: Connect your passive speakers to the 'OUTPUT' or speaker terminals (L+ L- R+ R-). For 2.1 channel models (e.g., XY-S100H, XY-E100L), connect the subwoofer to the dedicated 'SUBWOOFER' output. Ensure correct polarity for all speakers.
  3. Audio Input: Choose your preferred audio input method:
    • Bluetooth: Power on the board. It should enter pairing mode automatically. Search for the device on your Bluetooth-enabled audio source (e.g., smartphone, computer) and connect.
    • AUX IN: Connect an audio source (e.g., MP3 player, computer) to the 'AUX IN' jack using a 3.5mm audio cable.
    • USB Audio: Connect a USB audio source to the 'USB AUDIO' port (if available on your model).
  4. Initial Volume: Before playing audio, turn the 'VOLUME' knob to its minimum setting to avoid sudden loud sounds.

Refer to the following diagrams for typical connection points:

XINYI Sini Audio XY-C50L Digital Power Amplifier Board with dimensions (48mm x 56mm) and port labels (DC:5-24V, L/R speaker outputs, Audio Output, USB Audio, Aux In, Volume).
Figure 2: XY-C50L Amplifier Board connections (DC In, Speaker Out, Audio In, Volume).
XINYI Sini Audio XY-T100H Digital Power Amplifier Board with dimensions (58mm x 81mm) and port labels (DC:5-24V, L/R speaker outputs, Audio Output, USB Audio, Aux In, Treble, Tuning, Bass, Volume).
Figure 3: XY-T100H Amplifier Board connections with Treble/Bass tuning.
XINYI Sini Audio XY-S100H 2.1 Channel Digital Power Amplifier Board with dimensions (93mm x 97mm) and port labels (DC:5-24V, L/R speaker outputs, Audio Output, USB Audio, Aux In, Subwoofer controls, R&L Channel controls, Master Volume).
Figure 4: XY-S100H 2.1 Channel Amplifier Board connections with dedicated subwoofer and channel controls.

Operating Instructions

  1. Power On: Once all connections are secure, apply power to the board. An indicator light (if present) may illuminate.
  2. Select Input: The board will typically automatically switch to the active input (e.g., Bluetooth if paired, or AUX if connected). Some models may have an input selection button or prioritize Bluetooth.
  3. Adjust Volume: Slowly turn the 'VOLUME' knob clockwise to increase the audio output level to your desired listening volume.
  4. Tone Control (for models with Treble/Bass): If your model includes 'TREBLE' and 'BASS' knobs (e.g., XY-T100H, XY-S100H), adjust them to fine-tune the audio's high and low frequencies according to your preference.
  5. Subwoofer Control (for 2.1 channel models): For models like XY-S100H or XY-E100L, use the 'SUBWOOFER VOLUME' and 'FREQ' (frequency) knobs to adjust the subwoofer's output level and crossover point.
  6. Power Off: Disconnect the power supply when not in use.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the amplifier board. Do not use liquid cleaners or solvents.
  • Storage: Store the board in a cool, dry place away from dust and direct sunlight when not in use for extended periods.
  • Ventilation: Ensure adequate airflow around the board during operation to prevent overheating, especially for higher-power models.
  • Connections: Periodically check all connections for tightness and ensure no wires are frayed or exposed.

Troubleshooting

  • No Sound:
    • Check power supply connection and ensure it's providing the correct voltage.
    • Verify speaker connections are secure and correctly polarized.
    • Ensure the audio source is playing and its volume is turned up.
    • Confirm the correct input mode is selected (Bluetooth, AUX, USB).
    • Check if the amplifier's volume knob is turned up.
  • Distorted Sound:
    • Reduce the volume on both the audio source and the amplifier.
    • Check for loose or faulty speaker connections.
    • Ensure the power supply is stable and providing sufficient current.
    • Adjust Treble/Bass controls to a neutral position or reduce them.
  • Bluetooth Pairing Issues:
    • Ensure the amplifier board is powered on and within range of your device.
    • Turn off and on Bluetooth on your audio source device.
    • Forget the device from your audio source's Bluetooth settings and try pairing again.
    • Ensure no other device is currently connected to the amplifier via Bluetooth.
  • Overheating:
    • Ensure the board has adequate ventilation and is not enclosed in a tight space.
    • Reduce the volume or operating time.
    • Verify speaker impedance matches the amplifier's requirements.

User Tips

  • For optimal sound quality, use high-quality audio cables and a stable power supply.
  • Consider adding a small heatsink to the main amplifier chip for prolonged high-power operation, especially in enclosed spaces.
  • When using Bluetooth, keep your audio source close to the amplifier board to maintain a stable connection.
  • Experiment with the Treble and Bass controls (if available) to find the sound profile that best suits your speakers and listening preferences.

Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.