Introduction
Welcome to the UMIDIGI AirBuds Pro user manual. These True Wireless Stereo (TWS) earphones are designed to provide an immersive audio experience with Hybrid Active Noise Cancellation (ANC), Triple-Mic Call Noise Cancellation, and a comfortable fit. This manual will guide you through the setup, operation, and maintenance of your AirBuds Pro.
UMIDIGI AirBuds Pro earbuds in their charging case.
Package Contents
Please check the box for the following items:
- UMIDIGI AirBuds Pro × 2 (Left and Right Earbuds)
- Charging Case × 1
- Type-C Charging Cable × 1
- User Guide × 1
- Earbud Tips (five sizes, M installed by default)
Setup
Initial Charging
Before first use, ensure your AirBuds Pro and charging case are fully charged. Connect the provided Type-C charging cable to the charging port on the case and a power source. The indicator light on the case will show charging status.
Pairing with Your Device
The AirBuds Pro support instant connection. Follow these steps to pair them with your smartphone:
- Open the lid of the charging case. The earbuds will enter pairing mode automatically.
- On your smartphone, go to Bluetooth settings and turn on Bluetooth.
- Search for available devices and select "AirBuds Pro" from the list.
- Confirm the pairing request on your phone.
Once paired, the earbuds will automatically connect to your device when you open the charging case lid.
Video: AirBuds Pro Tutorial - Demonstrates pairing, noise control, music control, call management, disconnection, and reset procedures.
Instant connection pop-up on a smartphone.
Operating Instructions
Touch Controls
The AirBuds Pro feature intelligent touch controls for easy management of music, calls, and noise modes.
- Single tap: Increase/Decrease volume
- Double tap: Play/Pause music, Answer/End call
- Triple tap (left earbud): Play previous song
- Triple tap (right earbud): Play next song
- Long press for 2 seconds: Enable/Disable ANC or Transparency Mode, Reject call
Visual guide to AirBuds Pro touch controls.
Noise Control (ANC & Transparency Mode)
The AirBuds Pro offer Hybrid Active Noise Cancellation (ANC) up to 30dB to block out ambient noise, and a Transparency Mode to allow you to hear your surroundings.
- ANC Mode: Reduces external noise for an immersive listening experience. This mode is turned on by default for the first time.
- Transparency Mode: Allows environmental sounds to pass through, so you can stay aware of your surroundings without removing the earbuds.
To switch between ANC, Transparency Mode, and ANC Off, long-press either earbud for 2 seconds. You will hear a prompt tone indicating the current mode (ANC ON, Pass-Through, ANC OFF).
Active Noise Cancellation up to 30dB for an immersive music experience.
Transparency Mode allows you to talk without limits and hear your surroundings.
Music Playback
Ensure your music player is running in the background on your connected device.
- Play/Pause: Double-tap either earbud.
- Previous Song: Triple-tap the left earbud.
- Next Song: Triple-tap the right earbud.
Call Management
- Answer/End Call: Double-tap either earbud.
- Reject Call: Long-press either earbud for 2 seconds.
The AirBuds Pro feature Triple-Mic Call Noise Cancellation (ENC) for clearer voice during calls, even in noisy environments.
Triple-Mic Call Noise Cancellation uses multiple microphones to pick up your voice and remove ambient noise.
UMIDIGI App
Enhance your experience by downloading the UMIDIGI APP. The app allows you to customize touch controls, manage ANC settings, control EQ settings, and more to personalize your music preference.
Maintenance
Cleaning
Regularly clean your earbuds and charging case to ensure optimal performance and hygiene. Use a soft, dry, lint-free cloth. Do not use abrasive cleaners or submerge the devices in water.
Charging
Always use the provided Type-C charging cable. Avoid using damaged cables or chargers. Store the earbuds and case in a cool, dry place when not in use.
Water Resistance
The AirBuds Pro earphones are IPX5 water resistant, meaning they are protected against low-pressure water jets from any direction. This makes them suitable for sports and protection against sweat and light rain. However, the charging case is not water resistant. Do not submerge the earbuds or expose them to high-pressure water.
IPX5 water resistance provides all-weather protection against rain or sweat.
Troubleshooting
Disconnection
If your earbuds disconnect from your phone:
- Place both earbuds back into the charging case.
- Keep the lid open.
- Long-press the function button on the charging case for 3 seconds until the green light flashes 5 times. This will disconnect the earbuds from the phone and re-enter pairing mode.
Reset to Default
If you experience persistent issues, you can reset the earbuds to their factory default settings:
- Place both earbuds back into the charging case.
- Keep the lid open.
- Long-press the function button on the charging case for 10 seconds until the red light flashes 5 times. The reset is complete. The earphones will automatically turn on after the reset and enter pairing mode.
Common Issues
- No Sound: Ensure earbuds are charged, properly paired, and volume is up on both the earbuds and your device.
- Pairing Issues: Make sure Bluetooth is enabled on your device and the earbuds are in pairing mode. Try resetting the earbuds as described above.
- Unwanted Noise: If you experience unwanted noise, try disabling the Active Noise Cancellation (ANC) mode.
Specifications
| Feature | Detail |
|---|---|
| Driver | ⌀10 mm dynamic |
| Frequency Response Range | 20 Hz - 20 kHz |
| Audio Codec | SBC / AAC |
| Calling Features | Hybrid ANC (Active Noise Cancellation), Triple-Mic Call Noise Cancellation, ENC (Environmental Noise Cancellation) |
| Bluetooth Version | BT 5.1 |
| Effective Bluetooth Range | 10m (open space without obstacles) |
| Music Playback (1 charge, ANC disabled) | 6 hours |
| Talk Time (1 charge, ANC disabled) | 5 hours |
| Music Playback (1 charge, ANC enabled) | 4 hours |
| Talk Time (1 charge, ANC enabled) | 2.5 hours |
| Total Music Playback (with charging case) | 25 hours |
| Total Talk Time (with charging case) | 20 hours |
| Charging Time | 2 hours |
| Charging Port | USB Type-C |
| Sweat and Water Resistant | IPX5 (earphones only) |
| Companion App | UMIDIGI APP |
Battery life details for UMIDIGI AirBuds Pro.
High-precision 10mm dynamic driver for clear sound.
Bluetooth 5.1 ensures stable and fast connection with dual-channel transmission.
User Tips
- Ear Tip Selection: For better noise isolation and comfort, experiment with the five different sizes of earbud tips included to find the best fit for your ears.
- ANC Management: If you experience any unwanted or 'extra' noise, try disabling the Active Noise Cancellation (ANC) mode by long-pressing either earbud for 2 seconds.
- App Download: If the QR code for the UMIDIGI APP does not work, please search for 'UMIDIGI APP' directly in your device's official app store.
Choose the most suitable ear tips for a secure and comfortable fit.
Warranty and Support
UMIDIGI products are manufactured to the highest quality standards. For detailed warranty information, please refer to the warranty card included in your package or visit the official UMIDIGI website. If you encounter any issues or have questions not covered in this manual, please contact UMIDIGI customer support for assistance.
