GAMWING Pro Gamepad

Contents

GAMWING Pro Gamepad User Manual

Bluetooth-compatible Wireless Controller for Nintendo Switch / Switch Lite

Introduction

This manual provides detailed instructions for the GAMWING Pro Gamepad, a wireless controller designed for use with Nintendo Switch and Switch Lite consoles. This gamepad offers advanced features including six-axis gyroscope, dual-motor vibration, and macro programming capabilities, enhancing your gaming experience. It also features compatibility with a phone holder (sold separately or included with some models) for mobile gaming setups.

The controller connects wirelessly via Bluetooth, ensuring a stable connection and strong anti-interference ability without the need for additional drivers.

Setup Instructions

Pairing with Nintendo Switch / Switch Lite

  1. Ensure your Nintendo Switch or Switch Lite console is powered on.
  2. Navigate to the "Controllers" menu on your Switch console.
  3. Select "Change Grip/Order" to enter the Bluetooth search pairing mode.
  4. On the GAMWING Pro Gamepad, long press the HOME button for approximately 3 seconds. The indicator lights on the controller will begin to flash, indicating it is in pairing mode.
  5. The console will detect the gamepad. Once detected, the indicator lights on the controller will become solid, confirming a successful connection.

Video: Demonstrating the pairing process of the GAMWING Pro Gamepad with a Nintendo Switch console.

Operating Instructions

Basic Operation

  • Once paired, the gamepad can be used for navigation and gameplay on your Nintendo Switch or Switch Lite.
  • The controller features standard gamepad buttons (A, B, X, Y, D-pad, joysticks, L/R, ZL/ZR, Home, Capture, Plus, Minus buttons).

Advanced Features

  • Six-Axis Gyroscope: Provides precise motion control for games that support it.
  • Dual-Motor Vibration: Offers immersive haptic feedback during gameplay.
  • Macro Programming Function: This controller supports macro programming. Specific instructions for setting up and using macro functions are typically detailed in a separate, more advanced guide or through specific button combinations not provided in the current data. Please refer to the manufacturer's website or included documentation for detailed macro programming steps.

Charging the Gamepad

The gamepad is equipped with a 550 mAh battery. To charge, connect the gamepad to a power source using a compatible USB cable. The charging current is approximately 180mA, and a full charge takes about 3.5 hours. A fully charged gamepad provides approximately 10 hours of use time and up to 30 days of standby time.

Maintenance

  • Keep the gamepad clean by wiping it with a soft, dry cloth.
  • Avoid exposing the gamepad to extreme temperatures, humidity, or direct sunlight.
  • Do not disassemble the gamepad, as this may void the warranty and cause damage.
  • Store the gamepad in a dry place when not in use.

Troubleshooting

Controller not connecting or disconnecting frequently:

  • Ensure the gamepad is fully charged.
  • Re-attempt the pairing process as described in the "Setup Instructions" section.
  • Ensure the gamepad is within the effective transmission distance (<10m) of the console.
  • Check for any obstructions that might interfere with the Bluetooth signal.
  • Restart both the Nintendo Switch console and the gamepad, then try pairing again.

Buttons or joysticks not responding:

  • Verify the controller is properly connected to the console.
  • Test the controller in a different game or menu to determine if the issue is game-specific.
  • Ensure no physical debris is obstructing the buttons or joysticks.

Specifications

FeatureDetail
Compatible PlatformNintendo Switch, Nintendo Switch Lite
Interface TypeBluetooth 5.0
Transmission Distance<10 meters
VoltageDC 3.6-4.2V
Working Current<20mA
Vibration Current70-120mA
Sleep Current9uA
Charging Current~180mA
Battery Capacity550 mAh
Charging Time~3.5 hours
Use Time~10 hours
Standby Time~30 days
Weight212g
Dimensions15.7 x 10.8 x 6.2 cm
CertificationRoHS
OriginMainland China
Input (from controller back)DC 5V 550mA
Back view of two GAMWING Pro Gamepads showing model information and regulatory marks.

Image: Back view of the controller showing input specifications and certifications.

User Tips

No specific user tips were available from reviews or Q&A for this product at the time of manual creation.

Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact the seller or refer to the official product page where you made your purchase. Keep your proof of purchase for warranty claims.

Product Overview Images

Multiple color variations of the GAMWING Pro Gamepad, front view.
Various color options of the Pro Gamepad.
Angled view of a black GAMWING Pro Gamepad with red and blue accents.
Angled view of the black gamepad with red and blue accents.
Front view of a pink GAMWING Pro Gamepad with a removable phone holder attachment.
Pink gamepad with phone holder attachment.
GAMWING Pro Gamepad with an attached phone holder, showing a smartphone mounted.
Gamepad with phone holder attached, front view.
Top view of the GAMWING Pro Gamepad with an attached phone holder.
Top view of the gamepad with phone holder.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.