1. Introduction
The IRXON BT578 V3 is a versatile dual-mode Bluetooth adapter designed to replace traditional RS232 serial port cables. It facilitates wireless serial port transmission between RS232 devices and various computing platforms, including computers, mobile phones, and tablets. This adapter supports both Bluetooth V3.0 (SPP) and Bluetooth V4.2 (BLE) protocols, offering enhanced performance with lower power consumption, extended transmission range, and high-speed communication capabilities compared to its predecessors.

2. Specifications
| Feature | Specification |
|---|---|
| Bluetooth Protocol | Bluetooth V3.0 (SPP) + Bluetooth V4.2 (BLE) |
| Transmission Power | 5dBm |
| Receiving Sensitivity | -95dBm |
| Serial Port Baud Rate | 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps |
| BLE Characteristic Value | 0000ffe1-0000-10000-8000-00805f9b34fb |
| Max Wireless Distance | 30 meters |
| Operating Temperature | -10 ℃ to 55 ℃ |
| Typical Working Current | 8mA |
| Dimensions (LxWxH) | 78 x 34 x 16 mm |
| Weight | 30g |
3. Device Overview

- Serial port data indicator (green)
- Bluetooth status indicator (blue)
- Power/charging indicator (red)
- Sleep wake-up button
- Male/female switch
- DB9 serial port male
- Internal battery power switch
- TYPE-C power supply/charging interface
4. Setup
4.1 Initial Charging
- The BT578 V3 has a built-in lithium battery and charging circuit.
- Connect the adapter to a power source using the provided USB Type-C cable. You can use a mobile phone charger, notebook Type-C charger, or a computer's USB interface.
- The red Power/charging indicator (3) will illuminate during charging.
- The red indicator will turn off once the battery is fully charged. A full charge from empty takes approximately 1 hour.
4.2 Connecting to RS232 Device
- The adapter can be directly connected to a female serial port device.
- For male serial port devices, use the included DB9 male-female adapter (gender changer).
- Ensure the Male/female switch (5) is set correctly for your connection type.


4.3 Powering the Device
- The adapter can be powered by its internal battery (after charging) or via the USB Type-C port (8).
- Alternatively, it supports power supply through the ninth pin of the DB9 serial port. If the ninth pin is connected to a 4V-6V power supply and the fifth pin is grounded, the adapter will operate normally.
- Ensure the internal battery power switch (7) is in the ON position if relying on the internal battery.
5. Operating Instructions
5.1 Wireless Serial Communication
The BT578 V3 replaces the physical serial cable, enabling wireless data exchange. It functions as a Bluetooth slave device and does not support acting as a Bluetooth host.

5.2 Connection Modes (SPP vs. BLE)
- SPP (Serial Port Profile): Used for connecting to computers. This mode virtualizes the Bluetooth connection into a serial port, allowing existing serial device applications to function without modification.
- BLE (Bluetooth Low Energy): Primarily used for connecting to Android phones and iPhones. When connected via BLE, the interface provided to the user is a Bluetooth characteristic value, which typically requires secondary development within an application to interact with the serial device.
5.3 Application Scenarios
- Debugging network equipment such as switches and routers.
- Connecting to surveying and mapping instruments (e.g., total stations, level meters, equator meters) to read data.
- Controlling optometers and retrieving data.
- Facilitating data transmission for various RS232 equipment, including electronic scales, printers, PLC industrial control systems, and medical devices.
5.4 Indicator Lights
- Serial port data indicator (green): Flashes when serial port data is being transmitted or received, indicating activity.
- Bluetooth status indicator (blue): Indicates the Bluetooth connection status.
- Power/charging indicator (red): Illuminates during charging and turns off when fully charged.
6. Maintenance
- Keep the device dry and away from extreme temperatures.
- Clean the adapter with a soft, dry cloth. Do not use liquid cleaners.
- Ensure the USB Type-C port is free of debris to maintain proper charging and power supply.
- Charge the internal battery regularly if not using external power, especially if storing the device for extended periods.
7. Troubleshooting
7.1 Connection Issues
- No Bluetooth connection: Check if the Bluetooth status indicator (blue) is active. Ensure the adapter is powered on and within the 30-meter wireless communication range.
- Incorrect serial port settings: Verify that the serial port baud rate on the adapter matches the connected device. The BT578 V3's stop bit is fixed at one bit and cannot be changed.
- Device not recognized: Confirm the correct connection type (male/female) and that the Male/female switch (5) is set appropriately.
7.2 Data Transmission Problems
- No data flow: Observe the serial port data indicator (green). If it's not flashing during expected data transmission, check the serial port connection and device settings.
- AT Command issues: The format for AT commands has been adjusted for the new model; carriage return and line feed are not required at the end of new AT commands.
7.3 Power Issues
- Device not powering on: Ensure the internal battery is charged (red indicator off) or that an external power source is properly connected via USB Type-C or DB9 pin 9. Check the internal battery power switch (7).
7.4 Further Resources
For detailed troubleshooting guides and specific connection instructions, please refer to the official IRXON documentation:
- User Manual of the new BT578 Serial Port Bluetooth Adapter: https://manuals.plus/m/b7e2a6ed3485f89cb66072b37e4448477d05200c955f2ebb0eb61da9deba9544
- How to change BT578_ Serial port baud rate of V3?: http://www.irxon.com/application/forum.php?mod=viewthread&tid=82630
- How to connect the new BT578 to the computer via Bluetooth SPP: http://www.irxon.com/application/forum.php?mod=viewthread&tid=82610
- How to connect the new BT578 to Android phones via Bluetooth BLE: http://www.irxon.com/application/forum.php?mod=viewthread&tid=82612
- How to connect the new BT578 to iPhone via Bluetooth BLE: http://www.irxon.com/application/forum.php?mod=viewthread&tid=82613
- Configure the switch on the MacOS Mac through the new BT578 serial port Bluetooth adapter: http://www.irxon.com/application/forum.php?mod=viewthread&tid=82611
- BT578 Serial Bluetooth Adapter BLE Application Development Guide: http://www.irxon.com/application/forum.php?mod=viewthread&tid=82602
8. User Tips
- The BT578 V3 features an upgraded Type-C charging port for modern compatibility.
- Benefit from lower power consumption and a longer transmission distance compared to older models.
- The new serial port data indicator provides clear visual feedback on data activity, making troubleshooting easier.
- Remember that the BT578 V3 operates as a Bluetooth slave only; for master-slave pairing, consider the BT580 model.
9. Safety Information
⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
10. Warranty and Support
For product support, technical assistance, or warranty inquiries, please contact IRXON customer service. Refer to the official user manual (PDF link provided in Section 7.4) for comprehensive information.