1. Introduction
The Sofirn S11C is a versatile and compact zoomable LED flashlight designed for everyday carry (EDC), camping, searching, cycling, and other outdoor activities. It features a powerful Samsung TN-3535 5000K LED, USB-C rechargeable functionality, and a convenient power indicator. Its durable aluminum alloy body is shock-resistant and waterproof, making it a reliable tool for various conditions.

Figure 1: Sofirn S11C Flashlight and Accessories
2. Package Contents
- Sofirn S11C Flashlight
- 18650 3.7V Rechargeable Battery
- USB-C Charging Cable
- Pocket Clip
- Lanyard
- User Manual
3. Setup
3.1 Battery Installation
- Unscrew the tail cap of the flashlight.
- Insert the provided 18650 battery with the positive (+) end facing towards the head of the flashlight.
- Ensure the waterproof O-ring is properly seated and free of debris.
- Screw the tail cap back on tightly to ensure proper contact and water resistance.

Figure 2: Flashlight Components and Accessories
3.2 Charging the Battery
The S11C features a built-in USB-C charging port. To charge the battery:
- Locate the USB-C port on the flashlight body.
- Connect the provided USB-C cable to the flashlight and to a 5V 1A USB power source (e.g., wall adapter, power bank, computer USB port, car charger).
- The power indicator light will show the charging status:
- Red Light: Battery is charging.
- Green Light: Battery is fully charged.

Figure 3: USB-C Charging and Power Indicator
4. Operating Instructions
4.1 Power On/Off
Press the side switch to turn the flashlight ON or OFF.
4.2 Mode Selection
When the flashlight is ON, press and hold the side switch to cycle through the brightness modes: Moonlight (1LM), Low (30LM), Medium (300LM), and High (1000LM).

Figure 4: Available Brightness Modes and Runtimes
4.3 Zoom Function
The S11C features an adjustable beam for flood or throw. To adjust the beam, twist the part of the flashlight body above the switch. Twist forward for a focused, narrow beam (throw) and twist backward for a wide, diffused beam (flood).

Figure 5: Zoom Functionality (Flood and Throw)
4.4 Power Indicator
The power indicator light on the switch provides real-time battery status:
- Green Light: Sufficient battery power.
- Red Light: Low battery, recharge soon.
5. Maintenance
5.1 Cleaning
Wipe the flashlight body with a clean, soft cloth. For stubborn dirt, a slightly damp cloth can be used. Avoid using harsh chemicals or abrasive materials that could damage the anodized finish or lens.
5.2 Battery Care
- Recharge the 18650 battery regularly, especially if the red indicator light appears.
- Avoid completely draining the battery, as this can shorten its lifespan.
- If storing the flashlight for an extended period, remove the battery or ensure it is partially charged (around 50%) to prevent over-discharge.
5.3 O-rings and Threads
Periodically inspect the O-rings for any signs of wear or damage. Keep the O-rings and threads clean and lightly lubricated with silicone grease to maintain water resistance. Replace damaged O-rings promptly.
6. Troubleshooting
6.1 Flashlight Not Turning On
- Ensure the battery is correctly installed with the positive (+) end facing the head.
- Check if the battery is charged. If the power indicator is red or off, charge the battery.
- Tighten the tail cap and head of the flashlight to ensure proper electrical contact.
6.2 Dim Light or Short Runtime
- The battery may be low. Recharge the battery fully.
- The battery may be aging and losing capacity. Consider replacing the 18650 battery.
6.3 Water Ingress
- Ensure all parts, especially the tail cap and head, are screwed on tightly.
- Check the O-rings for damage or improper seating. Replace if necessary.
6.4 Lens Material
The lens of the Sofirn S11C flashlight is made of glass.
7. Specifications

Figure 6: Sofirn S11C Detailed Parameters
| Feature | Specification |
|---|---|
| LED Emitter | Samsung TN-3535 5000K |
| Working Voltage | 2.8V - 4.2V |
| Dimensions | 113 mm (Length) x 25 mm (Head Diameter) |
| Weight | 49 ± 1 gram (without batteries) |
| Body Material | Aerospace grade 6061 aluminum alloy |
| Finish | Hard-anodized anti-abrasive finish |
| Charger | Rechargeable via 5V 1A USB-C port |
| Battery Type | 1x 18650 3.7V (Included); Not compatible with 2x CR123A 3V |
| Waterproof Rating | IPX6 |
| Lumen Output (Modes) | Moonlight (1LM), Low (30LM), Medium (300LM), High (1000LM) |
| Runtime (Approx.) | Moonlight (30 days), Low (14h 44min), Medium (6h 17min), High (3h 37min) |
| Lighting Distance | 100-200 meters |
| Focal Length | Adjustable (Zoomable) |
| Switch Mode | High/Middle/Low (Stepped) |
| Functions | Shock Resistant, Hard Light |
| Certifications | CCC, CE, FCC, ROHS |

Figure 7: Flashlight Dimensions
8. User Tips
- Magnetic Tail Cap: The S11C features a magnetic tail cap, allowing you to attach it to metal surfaces for hands-free illumination during tasks like night repair or working in dark spaces.
- Pocket Clip: Utilize the included pocket clip for secure and convenient carrying, keeping the flashlight readily accessible.
- Mode Memory: The flashlight does not explicitly state mode memory. If you require a specific brightness level upon activation, ensure you set it before turning the flashlight off.
- Versatile Use: The zoomable beam and multiple brightness modes make this flashlight suitable for a wide range of activities, from close-up work to long-distance illumination.

Figure 8: Key Features and Durability

Figure 9: Usage Scenarios
9. Warranty and Support
For warranty claims, technical support, or further inquiries, please contact the seller or manufacturer directly. Retain your purchase receipt as proof of purchase.