metyoucar CYTQ-034 Gear Shift Gear Panel Decoration Cover Base

Contents

Instruction Manual: metyoucar CYTQ-034 Real Carbon Fiber Gear Shift Gear Panel Decoration Cover Base

1. Introduction and Overview

This manual provides instructions for the installation and care of your new metyoucar CYTQ-034 Real Carbon Fiber Gear Shift Gear Panel Decoration Cover Base. This product is designed to enhance the aesthetic appeal of your vehicle's interior with a high-quality carbon fiber finish, offering both decoration and protection for the gear shift panel area.

Carbon fiber products are chosen for their precise fit and ability to elevate the car's appearance.

2. Product Features

  • Material: True carbon fiber
  • Color Options: Black, Red
  • Quantity: 1 piece set

The product is available for both Left-Hand Drive (LHD) and Right-Hand Drive (RHD) vehicles.

Product variants showing black and red carbon fiber trim pieces for left and right rudder vehicles, with an installed view of a black carbon fiber trim.

Figure 2.1: Available product variants and an installed view.

3. Compatibility

This gear shift panel decoration cover base is compatible with the following BMW models:

  • BMW 1 Series: F20, F21 (2012-2018)
  • BMW 2 Series: F22, F23 (2014-2018)
  • BMW 3 Series: F30, F31 (2013-2018), 3 Series GT F34 (2013-2018)
  • BMW 4 Series: F32, F33, F36 (2014-2018)
  • BMW M2: F87 (2016-2018)

Before purchasing and installing, please compare your car's gear shift panel with the product images to ensure compatibility. If you have any doubts, please contact support.

Image showing a black carbon fiber trim piece labeled 'Style C' alongside a list of compatible BMW F-series models and their respective year ranges.

Figure 3.1: Compatible BMW models and years.

4. Setup and Installation

The product uses self-adhesive tape for installation. Follow these steps carefully for optimal results:

  1. Clean the Installation Location: Thoroughly clean the gear shift panel area in your car. Ensure it is free from water, oil, stains, and dust. A clean surface is crucial for proper adhesion.
  2. Prepare Adhesive Tape: The self-adhesive tape is located on the back of the trim piece. It is designed for easy installation without drilling or welding.
  3. Heat the Adhesive (if cold): If the ambient temperature is cold, use a hairdryer to gently heat the double-sided tape. This will improve the adhesive effect. Be careful not to overheat the tape or the car's interior surfaces.
  4. Apply the Trim Piece: After tearing off the protective film from the adhesive tape, avoid touching the adhesive with your fingers to maintain its stickiness. Carefully align the decoration cover with the gear shift panel and press firmly into place.
  5. Post-Installation Care: After installation, avoid washing your car or exposing the installed area to water for at least 24 hours. This allows the adhesive to fully cure and bond securely.
Before and after installation comparison showing the original gear shift panel and the panel with the carbon fiber decoration cover installed.

Figure 4.1: Before and After Installation.

Close-up view of the back of the carbon fiber trim piece, showing the red adhesive tape strips.

Figure 4.2: Adhesive tape on the back of the trim piece.

5. Maintenance

To maintain the appearance of your carbon fiber decoration cover, regularly wipe it with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish. Ensure the surface is dry after cleaning.

6. Troubleshooting

If you encounter any issues with your product, please refer to the following:

  • Problematic, Incorrect, or Damaged Item: If the item you received is problematic, incorrect, or damaged, please contact customer support immediately. Provide clear photos of the item, including its packaging and any shipping labels, to help us address the situation efficiently.
  • Damage Due to Installation Error: Please note that if the product is damaged due to an incorrect purchase (e.g., wrong model for your car) or an installation error on the part of the buyer, compensation may not be provided. Always ensure compatibility and follow installation instructions carefully.

7. Specifications

AttributeValue
Item TypeGear Shift Gear Panel Decoration Cover Base
Model NameCYTQ-034
Brand Namemetyoucar
MaterialReal carbon fiber
ColorBlack/Red
Item Weight47g
Item Height3cm
Item Width14cm
Item Length14cm
External Testing CertificationISO9001
OriginMainland China
Installation ConditionsCar use double-sided adhesive paste

8. User Tips

For best results and longevity of the product, ensure the installation surface is meticulously clean and dry before applying. Take your time during alignment to achieve a perfect fit, as repositioning may weaken the adhesive bond.

9. Warranty and Support

For any product-related inquiries, issues, or support needs, please contact the seller directly. Refer to the 'Troubleshooting' section for guidance on handling problematic items. The seller is committed to assisting with product concerns.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.