Introduction
This manual provides instructions for installing and configuring the SKYFAME Car 16Pin Wiring Harness Adapter and Canbus Box Decoder. This product is designed to facilitate the retrofitting of Android large-screen intelligent car multimedia navigation audio systems into compatible Volvo vehicles. The dedicated wiring harness and Canbus box allow for seamless integration, replacing the original car radio and audio system while maintaining essential vehicle functions.
Compatible Vehicle Models:
- Volvo XC90 (2003-2014)
Important Note: Original vehicles are categorized into two types: those with optical fiber (OF) and those without optical fiber. Please ensure you select the correct wiring harness kit for your specific vehicle configuration.
Setup and Installation
Installation of this wiring harness and Canbus decoder is designed to be straightforward, suitable for both professional installers and experienced DIY enthusiasts. However, due to the complexity of vehicle electronics, professional installation is highly recommended.
Pre-Installation Checklist:
- Identify your vehicle's original configuration: Determine if your Volvo XC90 (2003-2014) has an optical fiber audio system or not. This is crucial for selecting the correct harness.
- Ensure all components are present: Verify that you have the correct wiring harness, Canbus box decoder, and any other necessary accessories.
- Gather necessary tools: Basic automotive tools, wire strippers (if modifications are needed, though generally not required), and a trim removal tool may be helpful.
Installation Steps:
- Disconnect Battery: For safety, always disconnect the vehicle's negative battery terminal before beginning any electrical work.
- Remove Original Head Unit: Carefully remove the original car radio and any associated trim panels to access the wiring.
- Connect Wiring Harness: The SKYFAME wiring harness is designed for a plug-and-play installation. Connect the 16-pin main power cord interface of the new harness to your Android head unit. Then, connect the vehicle-specific connectors of the harness to the corresponding ports in your car. No wire cutting should be necessary.
- Integrate Canbus Box: The Canbus box (OD-OLO-02 or RZ-VOLVO02) is an integral part of the harness. Ensure it is securely connected within the harness assembly.
- Route Cables: Neatly route all cables to prevent pinching or interference with other vehicle components.
- Install Android Head Unit: Mount your new Android large-screen head unit into the dashboard opening.
- Reconnect Battery: Once all connections are secure and verified, reconnect the vehicle's negative battery terminal.
- Initial Power-Up and Configuration: Turn on the vehicle and the Android head unit. Navigate to the factory settings menu of your Android host.
- Canbus Configuration: In the factory settings, locate the car bus configuration menu. Select the corresponding CANBUS brand (OUDI OD or RAISE RZC) and model (VOLVO / CX90 or Volkswagen / PQ as specified for your decoder). It is recommended to update to the latest MCU and configuration file when connecting to Wi-Fi for optimal performance.
Wiring Diagrams:
Refer to the following diagrams for detailed connection information based on your vehicle's configuration:
Operating Instructions
Once the wiring harness and Android head unit are correctly installed and configured, the system will integrate with your vehicle's existing electronics. The Canbus decoder ensures that steering wheel controls, vehicle information display, and other integrated functions operate correctly with the new Android system.
Key Features and Operation:
- Android Multimedia System: Operate your Android head unit as per its manufacturer's instructions. This harness provides the necessary power and data connections.
- Steering Wheel Controls: The Canbus decoder translates signals from your vehicle's steering wheel controls, allowing you to manage audio volume, track changes, and other functions directly from the steering wheel.
- Vehicle Information Display: Depending on your Android head unit and vehicle model, essential vehicle information may be displayed on the new screen.
- Reverse Camera/360-degree View: If your Android head unit supports it and you have installed compatible cameras, the system will automatically switch to the reverse camera view or a 360-degree parking assist view when reversing.
Video: Demonstration of an Android head unit installed in a Volvo XC90, showcasing the main interface and 360-degree parking assist view.
Maintenance
The SKYFAME wiring harness and Canbus box decoder are designed for durability and minimal maintenance. However, proper care of your overall car multimedia system is recommended.
- Software Updates: Regularly check for and install the latest MCU and configuration file updates for your Android head unit, especially after initial installation or if you experience any compatibility issues. These updates often improve performance and resolve bugs related to Canbus integration.
- Physical Inspection: Periodically inspect the visible wiring connections for any signs of wear, damage, or loose connections.
- Cleaning: Keep the area around the head unit and wiring clean and free from dust and debris.
- Environmental Conditions: Avoid exposing the system to extreme temperatures or excessive moisture, which can damage electronic components.
Troubleshooting
If you encounter issues after installation, please follow these troubleshooting steps:
- No Power to Head Unit:
- Double-check all power connections from the harness to the head unit and the vehicle's power source.
- Ensure the vehicle's battery is fully charged and properly connected. - Canbus Functions Not Working (e.g., Steering Wheel Controls, Vehicle Info):
- Verify that the Canbus box is correctly connected within the harness.
- Access the Android head unit's factory settings and confirm that the correct CANBUS brand and model are selected.
- Ensure the MCU and configuration files are up to date. - Audio Issues:
- Check all audio connections (RCA cables, speaker wires) between the harness and the head unit/speakers.
- If your vehicle has an optical fiber system, ensure the optical fiber connection is secure and the correct harness type is used. - Display/Screen Issues:
- Ensure the display cable is securely connected.
- Note that minor color differences between the product images and the actual product may occur due to variations in filming equipment and display devices. - General Problems:
- If you encounter any problems during use, please provide feedback with videos and pictures to customer service for assistance. Responses are typically provided within 12 hours. - Uncertainty about Vehicle Configuration:
- If you are unsure about your original car's specifications (e.g., optical fiber presence), contact customer service with your original car information for guidance on selecting the appropriate kit.
Specifications
| Feature | Detail |
|---|---|
| Brand | SKYFAME |
| Model Number | VOLVO0751 |
| Type | Power Line (Wiring Harness Adapter) |
| Compatible Vehicles | Volvo XC90 (2003-2014), S90, V90 |
| Canbus Box Brand | OUDI OD / RAISE RZC |
| Canbus Box Model | OD-VOLVO-02 / RZ-VOLVO02 |
| CANbus Config Patch | OUDI OD\VOLVO \ CX90 OR RAISE RZC\Volkswagen\PQ |
| Main Power Cord Interface | 16 PIN |
| Material | Environment-friendly ABS plastic (odorless, anti-aging) |
| Origin | Mainland China |
| Package Dimensions (approx.) | Length: 15 cm, Width: 15 cm, Height: 10 cm |
| Package Weight (approx.) | 0.15 kg |
Warranty and Support
All SKYFAME products come with a one-year warranty covering manufacturing defects. This warranty does not cover issues caused by misuse, human damage, accidental damage, water ingress, improper operation, or exceeding the prescribed scope of use.
For technical information or further inquiries, please visit our official website at www.skyfame.com and refer to the HELP section. If you have large-scale procurement needs or require development of a new vehicle bus protocol decoder, please contact our customer service for discussion.
User Tips
- Verify Optical Fiber: Before purchasing, confirm whether your Volvo XC90 (2003-2014) has an optical fiber audio system. This is the most critical factor in choosing the correct harness. If your 2004 XC90 has a fiber optic cable and no AUX, this product is designed to work with such configurations, provided the correct harness (with optical fiber) is selected.
- Professional Installation: While DIY is possible for experienced individuals, professional installation is highly recommended to ensure correct wiring and Canbus configuration, preventing potential damage or malfunction.
- Canbus Configuration is Key: After physical installation, remember to correctly configure the Canbus settings in your Android head unit's factory menu. Incorrect settings can lead to non-functional steering wheel controls or other integrated features.
- Update Software: Keep your Android head unit's MCU and configuration files updated, especially if you experience any unexpected behavior.
- Contact Support: If you are unsure about any step or encounter persistent issues, do not hesitate to contact customer service with details of your vehicle and the problem.
