Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the WGFJ-G006 Gas Oven Blower Fan. The WGFJ-G006 is a standard, general-purpose motor designed for use in gas ovens and stoves, ensuring efficient air circulation for optimal performance. Please read this manual thoroughly before installation and use to ensure safe and correct operation.
Setup and Installation
Before beginning installation, ensure the gas oven or stove is completely disconnected from its power source and gas supply. Safety precautions are paramount during this process.
Mounting
The WGFJ-G006 blower fan is designed for universal fit with screw hole distances between 60-70mm. Refer to the diagram below for precise measurements.
- Identify the mounting location within your gas oven or stove.
- Align the blower fan's mounting plate with the existing screw holes. The fan's mounting plate is 50mm high.
- Secure the fan using appropriate screws, ensuring a stable and vibration-free installation. The screw hole distance can accommodate 60-70mm.
Electrical Connection
The blower fan comes with pre-attached wiring (typically red and blue wires). Connect these wires to the corresponding power terminals of your oven's electrical system. If you are unsure about electrical connections, consult a qualified technician.
Operating Instructions
The WGFJ-G006 features an air volume regulating panel to control the airflow, allowing for precise adjustment based on your oven's requirements.
Air Volume Adjustment
The regulating panel has a dial marked from 0 to 10, along with a color-coded guide:
| Color Indicator | Air Volume Status | Adjustment Method |
|---|---|---|
| White Green | Insufficient Air | Turn the wind valve to a larger opening (increase dial setting). |
| Light Green | Moderate Air | Optimal setting for balanced airflow. |
| Dark Green | Over Air | Turn the wind valve to a smaller opening (decrease dial setting). |
Adjust the dial on the regulating panel to achieve the desired airflow for your specific cooking needs. Start with a moderate setting and adjust as necessary.
Maintenance
Regular maintenance ensures the longevity and efficient operation of your blower fan.
- Cleaning: Periodically inspect the fan blades and housing for dust, grease, or debris buildup. Disconnect power before cleaning. Use a soft brush or cloth to gently remove any accumulation. Avoid using harsh chemicals or abrasive materials.
- Inspection: Check for any signs of wear, such as loose connections, damaged wires, or unusual noises during operation.
- Lubrication: This motor is typically sealed and does not require user lubrication. Do not attempt to lubricate internal components unless specifically instructed by a qualified technician.
Troubleshooting
If you encounter issues with your WGFJ-G006 blower fan, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on | No power supply, loose wiring, faulty motor. | Check power connection to the oven. Verify all wiring connections are secure. If issues persist, consult a qualified technician. |
| Reduced airflow | Air volume regulating panel set too low, obstructed fan blades, motor wear. | Adjust the air volume regulating panel to a higher setting. Disconnect power and clean fan blades. If still low, motor may need replacement. |
| Unusual noise or vibration | Loose mounting, debris in fan, worn bearings. | Ensure the fan is securely mounted. Disconnect power and check for debris. If noise persists, the motor may be failing and require replacement. |
Always disconnect power to the appliance before performing any inspection or maintenance.
Specifications
| Feature | Detail |
|---|---|
| Model | WGFJ-G006 (G006) |
| Type | Gas Oven/Stove Blower Fan Motor |
| Origin | Mainland China |
| Mounting Hole Distance | 60-70mm (adjustable) |
| Overall Width | Approximately 90mm |
| Mounting Plate Height | Approximately 50mm |
| Package Dimensions (L x W x H) | 11 cm x 11 cm x 11 cm |
| Package Weight | 2.0 kg |
User Tips
- When replacing an old fan, carefully note the wiring configuration before disconnecting to ensure correct re-installation.
- Ensure the air intake and exhaust vents of your oven are clear of obstructions for optimal fan performance.
- If the fan seems to be running continuously or not at all, check the oven's thermostat or control board, as the fan's operation is often linked to these components.
Warranty and Support
For specific warranty information regarding your WGFJ-G006 Gas Oven Blower Fan, please refer to the purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.
If you require technical assistance or have questions not covered in this manual, please reach out to the product seller or a qualified appliance repair professional.
