Introduction
This manual provides detailed instructions for assembling and operating your Cada 880-piece building block shotgun model. Designed for enthusiasts of military and police-themed building sets, this model offers a realistic replica with functional features. Please read all instructions carefully before beginning assembly and operation.
Safety Information
- WARNING: DO NOT POINT AT PEOPLE OR ANIMALS. This product is a toy and should be handled responsibly.
- WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Small parts included. Not suitable for children under 3 years due to choking hazard.
- Warning: Can not eat. Keep blocks away from mouth.
Package Contents
Your Cada Shotgun Model Building Blocks set includes:
- 880 Building Block Pieces
- 5x Free Rubber Bands
- 1x New Multi-functional Disassembler Tool
Image: Included accessories - rubber bands and disassembler.
Assembly and Setup
Follow the included step-by-step pictorial instructions to assemble your model. The set allows for two main configurations:
- Short Version: Utilizes the short gun grip module.
- Long Version: Incorporates the long gun barrel module and long gun stock module.
Image: Modular design for two types of assembly.
Key Components:
Familiarize yourself with the main functional parts of the model:
- Grip: For holding the model.
- Bullet Loading Device: Mechanism for preparing the rubber bands.
- Barrel: The front section of the model.
- Movable Pump: Used to load the shooting mechanism.
- Trigger: Activates the shooting function.
Image: Detailed view of key components.
Attaching the Functional Sling:
- Adjust the length of the sling to your preference.
- Align the sling's attachment points with the corresponding holes on the model.
- Securely attach the sling.
Image: Steps for attaching the functional sling.
Assembly and Feature Overview Video:
Video: Demonstrates the assembly of modules, loading mechanism, and firing modes of the Cada shotgun model.
Operating Instructions
Loading Rubber Bands:
To prepare the model for shooting:
- Fasten the rubber bands to the trigger device and the muzzle of the model. Ensure they are securely in place.
Image: Fastening rubber bands for single shot.
Single Shot Function:
- Fasten the rubber bands as described above.
- Pull the pump mechanism to load the bullet (rubber band).
- Pull the trigger to proceed with emission.
Image: Single shot operation.
Burst Shooting Function:
- Fasten the rubber bands to the trigger device and muzzle.
- Press and hold the trigger.
- Repeat pulling the pump to achieve continuous shooting.
Image: Burst shooting operation.
Maintenance
To ensure the longevity and proper function of your building block model, follow these maintenance guidelines:
- Cleaning: Wipe the blocks with a dry or slightly damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the model in a cool, dry place away from direct sunlight to prevent discoloration or warping of plastic parts.
- Disassembly: Use the provided multi-functional separator tool for easy and safe disassembly of blocks.
Image: Multi-functional separator tool for easy disassembly.
Troubleshooting
- Blocks not connecting properly: Ensure the blocks are correctly aligned and apply gentle, even pressure. Check for any foreign objects obstructing the connection points.
- Shooting mechanism not working: Verify that the rubber bands are securely fastened to both the trigger device and the muzzle. Ensure the movable pump is fully engaged after each shot or before burst firing.
- Missing pieces: Double-check the packaging. If pieces are genuinely missing, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Number of Pieces | 880 |
| Material | ABS Plastic |
| Block Size | Small building block (Compatible with Lego) |
| Is Electric | No Battery |
| Certification | CE |
| Gender | Unisex |
| Recommended Age | 6-12Y, 14+y, 18+ |
| Scale | 1:1.25 |
| Sniper Rifle (C81053W) Dimensions | Length: 112.8 cm, Height: 24.6 cm |
User Tips
- The multi-functional separator tool makes disassembling the model quick and easy, taking only a couple of seconds per part.
- Enhance the realism of your model by applying the cool stickers included in the set.
Warranty and Support
For any questions, concerns, or support regarding your Cada Shotgun Model Building Blocks, please contact the seller or manufacturer directly. Keep your purchase receipt for any warranty claims.
