1. Introduction
The K&F CONCEPT EF-EOS R Auto Focus Lens Adapter is designed to allow Canon EF/EF-S mount lenses to be used on Canon RF mount mirrorless camera bodies. This adapter facilitates seamless communication between the lens and camera, supporting essential functions such as autofocus, aperture control, EXIF information transmission, and lens anti-shake. Constructed from durable aluminum alloy with refined craftsmanship, it ensures a secure and solid fit for your equipment.
Front view of the K&F CONCEPT EF-EOS R Auto Focus Lens Adapter.
2. Package Contents
- K&F CONCEPT EF-EOS R Auto Focus Lens Adapter
- Front Lens Cap
- Rear Lens Cap
- User Manual (this document)
3. Setup and Installation
Follow these steps to correctly install the lens adapter and your EF/EF-S lens onto your Canon RF mount camera body:
- Ensure both your camera and lens are powered off.
- Align the red dot on the lens adapter with the red dot on your Canon EF/EF-S lens. Rotate the lens clockwise until it clicks into place, securing it to the adapter.
- Align the red dot on the assembled lens adapter (with lens) with the red dot on your Canon RF mount camera body. Rotate the lens adapter clockwise until it clicks into place, securing it to the camera body.
- To remove, press the lens release button on the camera body, then rotate the adapter counter-clockwise to detach. Similarly, press the lens release button on the adapter to detach the lens.
Visual guide for installing the K&F CONCEPT EF-EOS R adapter.
4. Operating Instructions
The K&F CONCEPT EF-EOS R adapter supports various functions to enhance your photography experience:
4.1. Auto Focus (AF)
The adapter provides ultra-fast and accurate autofocus for still photography. It quickly detects the focus direction and target, ensuring sharp images.
Ultra-fast focus demonstration with moving subjects.
For video shooting, the adapter also supports autofocus, allowing you to maintain focus without manual adjustments during recording.
Video demonstrating the adapter's autofocus capabilities for both photography and video, including face and eye recognition, and high-speed continuous shooting.
4.2. Aperture Control
The adapter allows for direct aperture adjustment from your camera body, providing convenient control over your lens's aperture settings. This feature greatly improves ease of use and workflow.
Demonstration of camera body aperture adjustment with various f-stops.
4.3. Lens Anti-Shake Function
The adapter supports the anti-shake function of compatible lenses, effectively reducing image ghosting and blurring that can occur during handheld shooting or when capturing fast-moving subjects.
Illustration of the lens anti-shake function, reducing blur from motion.
4.4. Dual Focus Mode
The adapter is equipped with a focus mode switch, allowing quick transitions between C/P (Continuous/Phase-detection) two focus modes. This feature contributes to faster focusing speed and a higher focusing success rate.
Demonstration of dual focus mode for improved focusing speed and accuracy.
4.5. Tripod Mounting
The adapter features a 1/4" screw hole at the bottom, allowing it to be directly mounted on a tripod head or fixed to other camera accessories for increased stability and versatility.
Side view of the adapter highlighting the 1/4" screw hole.
5. Maintenance and Care
- Keep the adapter clean and free from dust and moisture. Use a soft, dry cloth to wipe the exterior.
- Avoid touching the gold-plated electronic contacts. If cleaning is necessary, use a clean, dry microfiber cloth specifically designed for electronics.
- Store the adapter with both front and rear caps attached when not in use to prevent dust accumulation and protect the contacts.
- Avoid exposing the adapter to extreme temperatures or direct sunlight for prolonged periods.
- Do not attempt to disassemble the adapter, as this may void the warranty and cause damage.
6. Troubleshooting
6.1. Lens or Camera Not Recognizing Adapter/Lens
- Ensure the adapter and lens are securely mounted and clicked into place on both ends.
- Check the electronic contacts on both the adapter and the lens for any dirt or debris. Clean gently with a microfiber cloth if necessary.
- Restart your camera.
- Ensure your camera's firmware is up to date.
6.2. Autofocus Issues
- Verify that the lens is set to AF (Autofocus) mode, if applicable.
- Ensure there is sufficient light for the camera's autofocus system to operate effectively.
- Check the camera's autofocus settings (e.g., AF mode, AF area).
- Note: While the adapter supports autofocus for both photos and videos, performance may vary depending on the specific lens and camera model.
6.3. Aperture Control Not Working
- Ensure the lens is properly attached and communicating with the adapter and camera.
- Check camera settings to ensure aperture control is not locked or overridden by another function.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | EF-EOS R |
| Lens Adapters Type | Lens Adapters |
| Focus Type | Auto Focus |
| Compatible Brand | Canon |
| Compatible Camera Body | Canon RF Mount Mirrorless Camera Body (e.g., EOS C70, EOS R5, EOS R6, EOS R) |
| Compatible Lens | Canon EOS (EF / EF-S) D/SLR Lenses |
| Features | Auto Focus, Anti-shake, Aperture Control, EXIF Transmission, Gold-plated Contacts, USB Firmware Upgrade, 1/4" Tripod Screw Hole |
| Material | Aluminum Alloy |
| Color | Black |
| Certification | CE |
| Package Dimensions (L x W x H) | 12 cm x 11 cm x 7 cm |
| Package Weight | 0.2 kg |
8. User Tips
- For optimal autofocus performance, especially in challenging lighting conditions, ensure your camera's firmware is the latest version.
- When switching between lenses, always power off your camera to prevent potential damage to the sensor or electronic contacts.
- Utilize the 1/4" tripod screw hole for stable shots, particularly with heavier lenses, to reduce strain on your camera's lens mount.
- Keep the adapter's firmware updated via USB to ensure compatibility with new camera models and lenses as they become available.
Key features of the adapter: Gold-plated electronic contacts, USB firmware upgrade, and adapter bracket for versatility.
9. Warranty and Support
K&F CONCEPT products are designed for reliability and performance. For any technical support or warranty inquiries, please refer to the official K&F CONCEPT website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.