EURS PW24W

Contents

EURS PW24W/PWY24W LED Bulbs User Manual

Automotive Signal Light

1. Introduction

Thank you for choosing EURS PW24W/PWY24W LED Bulbs. These high-performance LED bulbs are designed to enhance visibility and safety for your vehicle, serving as turn signal lights, daytime running lights (DRL), and fog lamps. This manual provides essential information for safe installation, operation, and maintenance.

2. Warning & Safety Information

  • Electrical Hazard: Disconnect the vehicle's power supply before installation to prevent electric shock.
  • Eye Protection: Avoid direct eye exposure to the light to prevent eye injury.
  • Vehicle Motion: Do not replace the headlight while the vehicle is in motion.

3. Specifications

FeatureSpecification
Product NameAutomotive Signal Light
BrandEURS
Model NamePW24W
Interface TypePWY24W
Voltage12 V
Wattage6W
Lumens1000Lm
LED Chip4014 chip
Lifespan>50000hrs
Waterproof LevelIP68
MaterialAluminum
Operating Temperature-40°C to +85°C
Available ColorsAmber, White, Red, Blue, Ice Blue

For a visual overview of the bulb's dimensions and LED chip details, please refer to the image below:

Bulb dimensions and 4014 LED chip detail
Figure 1: Bulb dimensions (15mm width, 40mm length) and 4014 LED Highlight lamp beads.

4. Package Contents

  • 1 x EURS PW24W/PWY24W LED Bulb (per bag)

5. Installation Instructions

  1. Turn off the vehicle's power supply completely before beginning installation.
  2. Locate the existing lamp housing for the bulb you intend to replace.
  3. Carefully remove the old bulb from its socket.
  4. Insert the new EURS LED bulb into the lamp housing, ensuring it is securely seated.
  5. After connecting the power supply, test the light to verify normal operation (e.g., turn signal, DRL, fog light function).

A visual demonstration of the product can be seen in the video below:

Video 1: Product demonstration showing the LED bulb's features and light colors.

6. Operating Instructions

Once installed, the EURS LED bulbs function as direct replacements for your vehicle's original PW24W/PWY24W bulbs. They are designed for use as turn signal lights, daytime running lights (DRL), and fog lamps, depending on your vehicle's wiring and intended application. The high-brightness 4014 LED chips ensure excellent visibility at night and a fast response time, enhancing driving safety.

The bulbs are available in various colors. Examples of the light output for different colors are shown below:

Multiple light colors from the LED bulb
Figure 2: Display of multiple light colors (purple, white, blue, yellow, red, ice blue) from the LED bulb.

7. Maintenance and Precautions

  • Do not arbitrarily modify wiring connections. Improper modifications can lead to malfunction or damage.
  • Avoid prolonged use in extremely high-temperature or humid environments, as this may affect the bulb's lifespan.
  • Non-professionals should not attempt to disassemble the unit. Disassembly voids the warranty.
  • Regularly check the bulbs for any signs of damage or loose connections.

8. Troubleshooting (FAQs)

Q: The light does not illuminate.
A: Check whether the power connection is secure and functional. Ensure the bulb is correctly seated in the socket.
Q: The light flickers.
A: This may indicate poor electrical contact in the wiring. Re-check connections. For some European and American vehicles, a dashboard message error or fast flashing (hyper-flashing) may occur due to the vehicle's CANbus system detecting a lower power draw from LED bulbs. In such cases, installing an additional load resistor (decoder) may be required to resolve the problem.
Q: The lens is cracked or damaged.
A: Replace with a new lamp assembly.

9. User Tips

  • Compatibility Check: Always verify the product dimensions and bulb type (PW24W/PWY24W) to ensure it will fit your vehicle's specific location. Some users have reported successful fitment in BMW i3 and 2020 VW Tiguan, while others noted issues with Peugeot models.
  • CANbus Systems: While these bulbs are designed to be Canbus error-free for most vehicles, some European and American models might still require additional load resistors (decoders) to prevent dashboard errors or hyper-flashing.
  • Wattage Note: The stated wattage is 6W. Some users have measured actual consumption around 2-2.4W. This difference might be due to measurement methods or specific vehicle electrical systems.

10. Compatibility Reference

These bulbs are designed for PW24W and PWY24W sockets. For general reference on various automotive bulb base types, please consult the diagram below. Ensure your vehicle uses the PW24W/PWY24W interface for proper fitment.

Diagram of various automotive bulb base types
Figure 3: Common automotive bulb base types (1156 BA15S, 1157 BAY15D, T20 7440, T20 7443, T25 3156, T25 3157).

11. Warranty and Support

EURS provides a 12-month (1 year) warranty for these LED bulbs. This warranty covers free repair for non-man-made defects. Please retain your proof of purchase for warranty claims.

For further detailed information, you may refer to the official user manual in PDF format: View User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.