CHAMOUS ICsee security camera

Contents

ICSEE WiFi/4G Solar Surveillance Camera Instruction Manual

Model: ICsee security camera | Brand: CHAMOUS

Introduction

This manual provides detailed instructions for setting up, operating, and maintaining your ICSEE WiFi/4G Solar Surveillance Camera. This advanced outdoor security camera features 3MP HD video, an 8W solar panel for continuous power, a built-in 12000mAh rechargeable battery, PIR motion detection, two-way audio, and remote access via the ICsee or Xmeye app. It is designed for robust outdoor use with IP65 waterproofing.

Setup Guide

1. Initial Charging & Power On

  1. Before first use, open the power on button.
  2. Charge the camera's built-in 12000mAh battery for approximately 10 hours using a 5V/2A USB adapter (not included) or the solar panel.
  3. Ensure the solar panel connector is securely covered after connection to maintain waterproofing.

2. App Download & Connection

  • Download the "ICsee" or "Xmeye" app from Google Play Store (for Android) or Apple App Store (for iOS). You can also scan the QR code provided in the user manual (physical copy) to download the app.
  • Follow the in-app instructions to add your camera.

3. Network Connection

This camera comes in two versions: WiFi and 4G. Ensure you have the correct version for your intended use.

  • WiFi Camera Version: Supports 2.4GHz WiFi connection only. Does not support 4G SIM card connection.
  • 4G Camera Version: Supports 4G SIM card connection only. Does not support WiFi connection.
  • For 4G cameras, ensure your SIM card's frequency band is compatible with the camera's module (refer to specifications table). Also, ensure your 3G/4G SIM card does not have a PIN password enabled.

4. Installation

The camera supports both all-in-one installation and separated installation for the PTZ security camera and solar panel.

Diagram showing the solar panel and camera mounted together on a wall, with the solar panel angled towards the sun.
Figure 1: Example of all-in-one installation with solar panel and camera.
Diagram showing the solar panel and camera mounted separately, with the solar panel connected to the camera via a cable.
Figure 2: Example of separated installation with solar panel and camera.

The camera is 100% wire-free for power, eliminating the need for network cables when using 4G connectivity.

Image illustrating the camera's wire-free operation with no cables or WiFi needed for 4G version.
Figure 3: Wire-free operation for 4G camera.

Operating Instructions

1. Remote Access & Monitoring

Use the ICsee or Xmeye mobile app to view live footage, control camera functions, and receive alerts from anywhere.

A person relaxing on a beach chair, remotely viewing their home on a smartphone via the camera app.
Figure 4: Remote access via mobile app.
Video 1: Demonstration of camera in action, showing dogs in a yard.

2. Pan, Tilt, and Zoom (PTZ) Control

The camera offers 355° pan and 90° tilt capabilities, allowing you to remotely adjust the viewing angle through the app to monitor every area. It also supports 4X digital zoom; use a pinch-to-zoom gesture on your mobile device to zoom in or out.

A hand using a smartphone to control the pan and tilt of the camera, showing a wide viewing angle.
Figure 5: PTZ control via mobile app.
An image demonstrating 4X digital zoom, showing a house from a distance and a zoomed-in view of its roof.
Figure 6: 4X Digital Zoom capability.

3. PIR Motion Detection & Alerts

The camera utilizes a highly sensitive PIR motion sensor for accurate detection, reducing false alarms. When unusual motion is detected, the camera will quickly wake up, capture the movement, and send real-time alert messages to your mobile app.

Image showing two people walking past the camera, with red boxes highlighting their movement, indicating PIR motion detection.
Figure 7: PIR Motion Detection in action.

4. Two-Way Audio

Equipped with a built-in microphone and loudspeaker, the camera supports two-way audio communication. You can speak with visitors or deter intruders directly through the app.

A person at a door speaking to someone remotely via a smartphone app, demonstrating two-way audio.
Figure 8: Two-Way Audio communication.

5. Night Vision Modes

The camera offers three night vision modes: Color, Infrared (IR), and Auto. The "Smart Flood Light" feature can illuminate human movements detected at night, enabling full-color night vision.

Comparison of Full Color Mode and Infrared Mode night vision, showing a brightly lit patio in color and the same patio in black and white infrared.
Figure 9: Full Color and Infrared Night Vision modes.

6. Storage Options

The camera supports both local storage via an SD card and cloud storage. When motion is detected, the camera records video and saves it to either the SD card or the cloud, depending on your settings.

Icons for SD card and cloud storage, with a timeline of recorded video clips.
Figure 10: SD Card and Cloud Storage options.

The camera supports loop recording, continuously overwriting older footage to ensure your memory card does not run out of space.

A timeline showing continuous recording and loop recording feature, with a smartphone displaying camera footage.
Figure 11: Loop recording functionality.

Maintenance

1. Waterproofing

The camera is IP65 rated, meaning it is protected against dust and low-pressure water jets. Ensure all covers and seals are correctly in place to maintain its waterproof integrity, especially after accessing the SIM card or SD card slots.

Image showing the camera outdoors in various weather conditions like rain, hot day, snow, and wind, with an 'IP66 Waterproof' label.
Figure 12: IP65 Waterproof rating for outdoor use.

2. Battery Care

The 8W solar panel provides continuous power, extending battery life significantly. The 12000mAh battery can last up to 365 days on standby (triggered 30 times a day). Monitor the battery level through the app. Low battery notifications and indicators are available.

Troubleshooting

  • Camera not operating after power off: The camera uses its built-in battery, so it will continue to operate even if home power is off. For 4G cameras, no WiFi network is needed.
  • Blue lights not on during 4G connection attempt:
    1. Verify your SIM card's frequency band is compatible with the camera's 4G module (refer to specifications).
    2. Ensure your 3G/4G SIM card does not have a PIN password enabled.
    3. If issues persist, contact customer support.
  • Battery life concerns: The camera has a 12000mAh battery and an 8W solar panel for continuous charging. Ensure the solar panel is receiving adequate sunlight and is properly connected.

Specifications

FeatureSpecification
Brand NameCHAMOUS
Model NumberICsee security camera
Clarity1080p (Note: Product title states 3MP, which is higher than 1080p. Assuming 3MP is the correct resolution for this model.)
Resolution3MP full HD
Connectivity4G (also available in WiFi version)
Power SupplyNormal (Solar Panel + 12000mAh Battery)
Battery12000mA (6pcs 18650 rechargeable)
Battery Using Life1 month (Triggered 30 times a day)
Solar Panel8W
Lens (mm)4mm
Viewing Angle90°
InstallationSide, Wall hanging
TechnologyPan / Tilt / Zoom
Waterproof GradeIP65
Supported Mobile SystemsiOS, Android
AppICsee / Xmeye
Internal Storage128G (Max SD card capacity)
SensorCMOS, 1/2.8''
Sensor BrandSony
Focal Length3.6mm
Alarm TypeLocal Alarm
Light sensitivityIntelligent dynamic
Video modeHD / SD
Sound alarmSupport
Working humidity20%~85%
Working temperature-20°C~50°C
Shell materialPVC
Weight2KG
CertificationCE

4G Frequency Bands (for 4G Camera Version)

Ensure your SIM card supports the frequency bands for your region:

Table showing 4G frequency bands for different regions like Europe, Southeast Asia, Northeast America, Japan, and Australia.
Figure 13: 4G Frequency Band Compatibility Table.

User Tips

  • For optimal solar charging, position the solar panel to receive maximum direct sunlight throughout the day.
  • Regularly check the camera's battery status via the app to ensure continuous operation.
  • If using a 4G SIM card, double-check that it is activated and has sufficient data, and that any PIN protection is disabled before insertion.
  • Adjust PIR motion detection sensitivity in the app to minimize false alarms from environmental factors like rain or small animals.
  • Utilize the two-way audio feature to communicate with delivery personnel or family members when you're away.

Warranty & Support

Warranty Information

This product comes with a 12-month warranty. During the warranty period, repair services will be provided free of charge. The customer is responsible for the shipping cost to return the product for repair. Once repaired, the product will be shipped back to the customer. The warranty does not cover incidental, accidental, or consequential damages arising from the use of the product.

Customer Support

For any technical support or inquiries, please contact customer service. 7/24 technical support service is available.

Statement of Compliance

Disclaimer

⚠️ Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

Certifications

CE Certified.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.