ABBIDOT T30

Contents

ABBIDOT T30 Dog Training Collar User Manual

Model: T30

1. Introduction

The ABBIDOT T30 Dog Training Collar is designed to assist in effective and humane dog training. It features multiple training modes, a long-range remote control, and a durable, waterproof design suitable for various training conditions. This manual provides detailed instructions for the proper use and maintenance of your T30 training collar.

ABBIDOT T30 Remote and two collars
Figure 1: ABBIDOT T30 Remote and two collars.
Video 1: Overview of the ABBIDOT T30 E-collar, demonstrating its features like training modes, safety lock, long range, adjustable strap, anti-lost light, and waterproof design.

2. Product Components

The ABBIDOT T30 Dog Training Collar system includes the following main components:

  • Remote Transmitter
  • Receiver Collar(s)
  • Adjustable Nylon Strap
  • Silicone Caps for Contact Points
  • Contact Points (various lengths)
  • Test Light
  • USB-C Charging Cable
  • Metal Extension Contact (for long-haired dogs)
Detailed diagram of remote and collar components
Figure 2: Detailed diagram of remote and collar components, including silicone caps, contact points, test light, and metal extension contact.

3. Specifications

FeatureSpecification
Model NumberT30
Training ModesTone (1-16 levels), Light, Vibration (1-36 levels), General Stimulation (1-15 levels), Boosted Stimulation (16-36 levels)
Control RangeUp to 3300 ft (950 m)
Waterproof RatingIPX7 (Receiver Collar)
Battery Life (Standby)Up to 100 days
Battery Life (Work Time)Up to 16 days
Charging Time2 hours (USB-C Quick Charge)
Applicable Dog Weight8-120 lbs
Collar Strap AdjustmentMin 6 inches, Max 27 inches
MaterialPlastic
Frequency433.92MHz
Adjustable strap for dogs 8-120 lbs, min 6 inches, max 27 inches
Figure 3: Adjustable strap for dogs weighing 8-120 lbs, with a minimum length of 6 inches and a maximum of 27 inches. Includes contact points for long/short fur.

4. Setup

4.1 Charging the Devices

  • Connect the USB-C charging cable to the charging port on both the remote transmitter and the receiver collar(s).
  • Plug the other end of the cable into a standard USB power adapter (not included).
  • The charging indicator light will show the charging status. Charge until the indicator shows a full charge (approximately 2 hours).
Battery life details: 100 days standby, 16 days work time, 2 hours USB-C charge
Figure 4: Battery life details: 100 days standby, 16 days work time, 2 hours USB-C charge.

4.2 Attaching Contact Points and Silicone Caps

  • Select the appropriate length of contact points for your dog's fur length. Use longer points for dogs with thick fur and shorter points for dogs with short fur.
  • Screw the chosen contact points onto the receiver collar.
  • Place the silicone caps over the contact points to ensure comfort and prevent skin irritation.

4.3 Fitting the Receiver Collar

  • Place the receiver collar around your dog's neck, ensuring the contact points are touching the skin.
  • Adjust the strap so it is snug but not too tight. You should be able to fit two fingers comfortably between the strap and your dog's neck.
  • The collar should be positioned on the dog's neck, preferably to the side of the windpipe.

5. Operating Instructions

5.1 Power On/Off

  • Remote Transmitter: Press and hold the On/Off button until the LCD screen illuminates. To turn off, press and hold the On/Off button until the screen turns off.
  • Receiver Collar: Press and hold the On/Off button on the receiver until the indicator light flashes. To turn off, press and hold the On/Off button until the light turns off.

5.2 Pairing (if necessary)

The devices usually come pre-paired. If re-pairing is needed:

  • Ensure both devices are off.
  • Turn on the remote transmitter.
  • Press and hold the On/Off button on the receiver collar until the indicator light flashes rapidly.
  • On the remote, select the desired channel (1 or 2) using the 'Selecting Channels' button.
  • Press the 'Shock' button on the remote. The receiver collar's indicator light will turn solid, indicating successful pairing.

5.3 Understanding the Remote Control

Remote control with 'Simulation Lock for Safety'
Figure 5: Remote control with 'Simulation Lock for Safety' (knob push down to lock/unlock stimulation), 36 levels, and 2 dog channels.
High Definition LCD display on the remote
Figure 6: High Definition LCD display on the remote, showing battery, stimulation level, and channel.
  • Level Up/Down Knob: Rotate to adjust the intensity levels for Tone, Vibration, and Stimulation.
  • Security Keypad Lock (ABBI-TES): Push down the knob to lock/unlock the stimulation function, preventing accidental activation.
  • Light Button: Activates the tracking light on the receiver collar.
  • Tone Button: Delivers an audible beep.
  • Vibration Button: Delivers a vibration.
  • Shock Button: Delivers static stimulation.
  • Selecting Channels: Allows switching between training channels for up to two dogs.

5.4 Training Modes

The T30 offers 5 training modes:

  • Tone (1-16 levels): Emits an audible sound. Levels adjust the tone's pitch or intensity.
  • Light: Activates the tracking light on the collar. Useful for visibility in low light conditions.
  • Vibration (1-36 levels): Delivers a non-harmful vibration. Levels adjust the intensity of the vibration.
  • General Stimulation (1-15 levels): Provides a mild static stimulation. Suitable for initial training and less stubborn dogs.
  • Boosted Stimulation (16-36 levels): Provides a stronger static stimulation. Designed for larger or more stubborn dogs, ensuring compliance without over-stimulation.
Remote and collar highlighting 4 training sessions
Figure 7: Remote and collar highlighting 4 training sessions (Tone, Vibration, Stimulation, Safety Light).
Remote control with 3300ft long-range capability
Figure 8: Remote control with 3300ft long-range capability, showing two dogs in the distance.

5.5 Tracking Light for Nighttime Use

The receiver collar features a built-in tracking light. Press the 'Light' button on the remote to activate it. This helps in locating your dog in the dark and increases visibility to traffic, enhancing safety.

Collar with 'Tracking Light Design' for night vision
Figure 9: Collar with 'Tracking Light Design' for night vision, showing a dog with the light on.

6. Maintenance

  • Cleaning: Regularly clean the receiver collar and contact points with a damp cloth. Ensure all components are dry before storage or next use.
  • Skin Check: Daily check your dog's skin around the collar area for any signs of irritation, redness, or sores. If irritation occurs, discontinue use and consult a veterinarian.
  • Collar Position: Reposition the receiver on your pet's neck every 1 to 2 hours to prevent pressure sores.
  • Wearing Duration: Avoid leaving the receiver collar on the dog for more than 12 hours per day. It is recommended to use it within 6 hours.
  • Storage: Store the device in a cool, dry place when not in use.
German Shepherd in water, illustrating IPX7 waterproof collar
Figure 10: German Shepherd in water, illustrating the IPX7 waterproof receiver collar. Note: The remote is not waterproof.

7. Troubleshooting

  • No Response from Collar: Ensure both the remote and collar are charged and powered on. Check if they are properly paired. Verify the contact points are making good contact with the dog's skin.
  • Weak or Inconsistent Stimulation: Recharge the devices. Ensure contact points are clean and correctly fitted. Adjust the intensity level.
  • Remote Not Working: Check battery level. Ensure no physical damage.
  • Low Battery Indication: The collar will flash a red light and vibrate slightly when the battery is low and needs charging.

8. User Tips

8.1 Training with Beep Mode

The vibration and shock modes on the T30 collar both include an accompanying beep. This design allows for progressive training:

  1. Initially, use the vibration mode (vibration + beep) or electric shock mode (shock + beep) for training.
  2. Over time, your dog will associate the beep with the subsequent vibration or shock.
  3. Eventually, you can transition to using only the beep mode to train your dog, as they will respond to the familiar sound.

8.2 General Usage Advice

  • Do not attach dog leashes to this training collar. Use a separate standard collar for leash attachment.
  • Always start training with the lowest effective stimulation level and gradually increase if necessary.
  • Observe your dog's reaction to each mode and level to find the optimal setting for their temperament and training needs.
  • The remote control is not waterproof; avoid exposing it to water.

9. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact ABBIDOT Official Store customer service. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.