QANBA N1-BQ Arcade Stick Joystick User Manual

Introduction

The QANBA N1-BQ Arcade Stick Joystick is a high-quality gaming peripheral designed to bring an authentic arcade experience to your PC, Steam, and Android gaming. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your N1-BQ arcade stick.

Package Contents

• QANBA N1-BQ Arcade Stick Joystick
• USB Data Cable (1.8 m)
• User Manual (this document)

Setup Guide

Connecting to PC/Steam

1. Ensure your PC or Steam device is powered on.
2. Connect the USB data cable from the QANBA N1-BQ arcade stick to an available USB port on your PC or Steam device.
3. The system should automatically detect and install the necessary drivers. This may take a few moments.
4. Once installed, the arcade stick is ready for use. You may need to configure controls within your game settings.

Connecting to Android Devices

1. Ensure your Android device supports USB OTG (On-The-Go) and has an appropriate adapter (not included) if necessary.
2. Connect the USB data cable from the QANBA N1-BQ arcade stick to your Android device via the USB OTG adapter.
3. The device should recognize the arcade stick as an input device.
4. Configure controls within your Android game or emulator settings.

Mode Selection Switch

On the bottom of the arcade stick, there is a switch labeled "NMD" and "NMO". This switch is used to select different operating modes. Please refer to the specific game or application requirements for the optimal mode setting.

Figure 1: Bottom view with mode selection switch.

Operating Instructions

The QANBA N1-BQ features a standard arcade layout for intuitive gameplay.

Figure 2: Top view of the arcade stick layout.

• Joystick: Use the joystick for directional input in games.
• Action Buttons: The six large buttons on the right are primary action buttons.
• Shoulder Buttons (L1/R1): Two smaller buttons are typically used for shoulder functions.
• System Buttons: Additional buttons (e.g., Start, Select, Home) are located above the action buttons for game and system control.

For optimal performance, ensure your game's control settings are mapped correctly to the arcade stick's inputs.

Maintenance

• Cleaning: Use a soft, dry cloth to wipe down the surface of the arcade stick. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
• Storage: Store the arcade stick in a cool, dry place away from direct sunlight and extreme temperatures.
• Cable Care: Avoid sharply bending or pulling the USB cable to prevent damage.

Troubleshooting

• Arcade Stick Not Recognized:
  • Ensure the USB cable is securely connected to both the arcade stick and your device.
  • Try connecting to a different USB port.
  • Restart your PC or device.
  • Verify that the correct mode is selected using the switch on the bottom of the unit.
• Buttons/Joystick Not Responding in Game:
  • Check the in-game control settings and ensure they are correctly mapped to the arcade stick inputs.
  • Some games may require specific drivers or software; check the game's requirements.
• No Mounting Arm Included:

  Please note that the QANBA N1-BQ arcade stick does not come with an arm or clamp for mounting to a desk or countertop. It is designed for tabletop use.

Specifications

User Tips

• For fighting games, experiment with the mode switch (NMD/NMO) on the bottom of the stick if you encounter unexpected behavior or wish to optimize input response.
• While the stick is robust, avoid excessive force on the joystick or buttons to prolong its lifespan.
• If using with Android, ensure your device's operating system is up-to-date for best compatibility.

Warranty and Support

QANBA products are manufactured to high standards and are covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty details, technical support, or service inquiries, please contact your retailer or visit the official QANBA support website.

Please retain your proof of purchase for warranty claims.