1. Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your RASTP Universal Ball Bearing Detachable Steering Wheel Quick Release Extension Hub, Model RS-QR030. Please read all instructions carefully before use.
2. Important Safety Information
Failure to follow these instructions may result in damage to the product or personal injury.
- Read all instructions before use.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
3. Product Overview & Specifications
The RASTP Quick Release Extension Hub is designed for universal fitment, allowing for quick detachment of your steering wheel. It features a durable aluminum alloy construction and is available in multiple colors.
3.1. Features
- Universal fitment for most aftermarket steering wheels.
- Detachable design for quick steering wheel removal.
- Constructed from high-quality aluminum alloy.
- Ball bearing mechanism for smooth operation.
- Available in multiple colors: Black, Red, Blue, Gold, Silver, Purple.
3.2. Specifications
| Attribute | Detail |
|---|---|
| Product Type | Steering Wheel Accessories |
| Brand Name | RASTP |
| Model Name | RS-QR030 |
| Material | Aluminum alloy |
| Available Colors | Black, Red, Blue, Gold, Silver, Purple |
| Origin | Mainland China |
| Dimensions | Refer to Figure 2 for detailed measurements. |
4. Package Contents
The package includes:
- 1 x Detachable Quick Release Extension Hub
- Mounting Hardware (screws, Allen key)
4.1. Product Unboxing Video
Video 1: Unboxing and initial overview of the RASTP Quick Release Hub.
5. Setup & Installation
Professional installation is highly recommended to ensure proper fitment and safety.
- Ensure your vehicle is safely parked with the engine off and battery disconnected.
- Remove your existing steering wheel and hub adapter (if applicable).
- The RASTP Quick Release Hub bolts directly between a steering hub adapter (70mm bolt pattern) and a 6-bolt steering wheel.
- Attach the base of the quick release hub to your steering hub adapter using the provided hardware. Ensure all bolts are securely tightened.
- Connect any necessary wiring for horn functionality. The quick release hub includes internal wiring connections (see Figure 5).
- Attach your 6-bolt aftermarket steering wheel to the quick release mechanism. Ensure it locks securely into place.
- Verify all connections are tight and the steering wheel is firmly attached before driving.
Note: A steering hub adapter (70mm bolt pattern) is sold separately and is required for installation.
6. Operating Instructions
To detach the steering wheel:
- Ensure the vehicle is stationary and safe.
- Locate the quick release mechanism on the hub.
- Engage the release mechanism (e.g., pull a collar, press a button, depending on the specific design) and pull the steering wheel away from the hub.
To attach the steering wheel:
- Align the steering wheel with the quick release hub.
- Push the steering wheel firmly onto the hub until it clicks into place.
- Ensure the steering wheel is securely locked and cannot be easily pulled off.
After Use: Turn off the device and store it in a dry place. Keep away from children.
7. Maintenance
- Regularly inspect the quick release hub and all mounting hardware for any signs of wear, damage, or looseness.
- Clean the unit with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the finish.
- Ensure the ball bearing mechanism operates smoothly. If it feels stiff, a small amount of dry lubricant (e.g., PTFE spray) can be applied, avoiding contact with electrical connections.
- Store the quick release hub in a dry environment when not in use.
8. Troubleshooting
- Steering wheel feels loose after installation: Re-check all mounting bolts and ensure they are tightened to the manufacturer's specifications. Ensure the quick release mechanism is fully engaged.
- Difficulty detaching/attaching steering wheel: Check for any obstructions or debris in the mechanism. Ensure proper alignment during attachment. A light lubricant might help if the mechanism is stiff.
- Horn not functioning: Verify all horn wiring connections are secure and correctly installed within the quick release hub and to the vehicle's wiring.
9. User Tips
- This quick release mount can be effectively used with computer steering wheel setups for simulation racing.
- Ensure the bolt pattern of your steering wheel and hub adapter matches the quick release unit (6-bolt steering wheel, 70mm bolt pattern hub adapter).
10. Manufacturer & Support Information
For further assistance or inquiries, please contact the manufacturer or authorized representative:
Manufacturer:
Ruian Lingsheng Auto Parts Co.,LtdFuzhou West Road, Xiacun Industrial Zone, Xincheng Street,
Ruian City, Zhejiang Province, Mainland China
Email: 3219289207@qq.com
EU Authorized Representative:
MJCM SARL78 avenue des Champs Elysees Bureau 326,
PARIS France
Email: mjcm190928@gmail.com
A PDF version of this user manual is available for download here.