1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of the Jessinie AI Intelligent Voice Recognition Module. This module is designed for offline voice control applications, enabling smart wireless remote control and switch functionalities. It is suitable for electronic experiments and integration into various smart electronic projects.
2. Product Features
- Offline voice recognition capability.
- Smart wireless remote control functionality.
- Integrated switch module for controlling external devices.
- Low power dissipation.
- Wide operating temperature range: -40°C to +85°C.
- Designed for electronic experiments and Arduino/STM projects.
3. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Jessinie |
| Type | Smart Electronics |
| Application | Electronic experiment |
| Supply Voltage | 5V |
| Dissipation Power | low |
| Operating Temperature | -40°C to +85°C |
| Condition | New |
| Package | Module |
| Origin | Mainland China |
Module Dimensions
- AI Intelligent Voice Recognition Module: 40mm x 23mm
- AI Voice Recognition Offline Voice Module (with Relay): 35mm x 37mm


4. Package Contents
The package typically includes:
- AI Intelligent Voice Recognition Module
- Speaker (connected via red and black wires)
- (Optional) AI Voice Recognition Offline Voice Module with Relay

5. Setup Instructions
5.1. AI Intelligent Voice Recognition Module (Standalone)
- Connect Speaker: The module comes with a speaker pre-connected via red (SPK+) and black (SPK-) wires. Ensure these connections are secure.
- Connect Microphone: The module has an integrated microphone (MIC) for voice input.
- Power Supply: Connect a 5V power supply to the VCC and GND pins. Alternatively, power can be supplied via the Micro USB port.
- Data Communication (Optional): For advanced control or programming, connect TXD and RXD pins to your microcontroller (e.g., Arduino, STM).
- Enable Module: Use the ON/OFF switch to power on the module.


5.2. AI Voice Recognition Offline Voice Module (with Relay)
- Connect Speaker: Similar to the standalone module, ensure the speaker is connected to SPK+ and SPK- terminals.
- Connect Microphone: The module includes an integrated microphone.
- Power Supply: Connect a 5V power supply to the 5V and GND pins.
- Relay Connections: The relay has three terminals: NC (Normally Closed), COM (Common), and NO (Normally Open). Connect your device to be controlled to COM and either NC or NO, depending on whether you want the device to be ON or OFF by default when the relay is de-energized.
- Data Communication (Optional): TXD and RXD pins are available for serial communication with a microcontroller.


6. Operating Instructions
The AI Intelligent Voice Recognition Module operates offline, meaning it does not require an internet connection for voice command processing. The specific voice commands are pre-programmed into the module.
- Power On: Ensure the module is correctly powered (5V via pins or Micro USB) and the ON/OFF switch is in the 'ON' position.
- Voice Command Input: Speak clearly into the microphone (MIC) of the module.
- Recognition and Response: Upon recognizing a pre-programmed command, the module will:
- Output an audible confirmation via the connected speaker.
- (For Relay Module) Activate or deactivate the integrated relay, thereby controlling the connected device.
- (For Standalone Module with Microcontroller) Send a corresponding signal via TXD/RXD to the connected microcontroller for further processing.
6.1. Example Operation (with Relay Module)
If the module is programmed with commands like "Turn On Light" and "Turn Off Light":
- Say "Turn On Light".
- The module will recognize the command, provide an audible confirmation, and energize the relay, switching the connected light ON.
- Say "Turn Off Light".
- The module will recognize the command, provide an audible confirmation, and de-energize the relay, switching the connected light OFF.
7. Maintenance
- Keep Dry: Protect the module from moisture and liquids to prevent damage to electronic components.
- Cleanliness: Keep the module free from dust and debris. Use a soft, dry cloth for cleaning. Avoid harsh chemicals.
- Temperature: Operate and store the module within the specified temperature range (-40°C to +85°C).
- Handle with Care: Avoid dropping or subjecting the module to strong impacts.
- Power Off When Not in Use: If the module will not be used for an extended period, disconnect the power supply.
8. Troubleshooting
- No Power/Module Not Responding:
- Check power connections (5V and GND) and ensure they are secure.
- Verify the power supply is providing the correct voltage (5V).
- Ensure the ON/OFF switch is in the 'ON' position.
- If using Micro USB, try a different cable or power source.
- Poor Voice Recognition:
- Ensure you are speaking clearly and at a normal volume.
- Reduce background noise in the environment.
- Ensure the microphone (MIC) is not obstructed.
- Speak within a reasonable distance from the microphone.
- Speaker Not Producing Sound:
- Check the speaker connections (SPK+ and SPK-) for proper polarity and secure contact.
- Ensure the volume is not set to minimum (if adjustable).
- Verify the module is receiving power and processing commands.
- Relay Not Activating (for Relay Module):
- Confirm the voice command is being recognized by the module (listen for audible confirmation).
- Check the wiring to the device connected to the relay (NC, COM, NO terminals).
- Ensure the connected device is functioning correctly and its power supply is adequate.
9. User Tips
Based on common user inquiries, here are some tips for getting the most out of your module:
- Clear Instructions: For optimal performance, ensure you have a clear understanding of the module's pre-programmed commands. If you are developing with the module, refer to the programming guide for customizing commands.
- Environment: Use the module in a quiet environment for the best voice recognition accuracy.
- Experimentation: This module is excellent for electronic experiments. Start with simple setups to understand its functionality before integrating it into complex projects.
10. Warranty and Support
For warranty information and technical support, please refer to the seller's official store page or contact their customer service directly. Keep your purchase records for any warranty claims.