Walbro WT-793 WT-793-1

Contents

Walbro WT-793 WT-793-1 Carburetor User Manual

For DLE 22cc 30cc R/C Air Plane Motors

Model: WT-793 WT-793-1 | Brand: Walbro

1. Introduction

Thank you for choosing the Walbro WT-793 / WT-793-1 Carburetor. This high-quality, durable carburetor is designed to provide a perfect match and reliable performance for DLE 22cc and 30cc R/C Air Plane Motors. This manual provides essential information for safe installation, operation, and maintenance of your new carburetor.

NOTE: Please check the size and compare with your existing carburetor before purchase to ensure compatibility.

2. Safety Information

▲ WARNING: CHOKING HAZARD

Small parts are not suitable for children under 3 years or any individuals who have a tendency to place inedible objects in their mouths. Keep all components out of reach of children and pets.

Always wear appropriate safety gear, including eye protection, when working with engine components. Ensure the engine is cool and disconnected from its power source before performing any installation or maintenance.

3. Specifications

AttributeValue
Model NumberWT793 WT-793-1 Carburettor
MaterialCarbide
Feature2-Stroke
UseHome DIY, R/C Air Plane Motors
OriginMainland China
Package Length13 cm
Package Width7 cm
Package Height10 cm
Package Weight0.144 kg

Dimensions

Refer to the images below for detailed dimensions of the carburetor.

Carburetor with dimensions: 12.5mm height, 31mm width
Carburetor with main body dimensions (12.5mm height, 31mm width)
Carburetor with dimensions: 15mm height, 31mm width
Carburetor with main body dimensions (15mm height, 31mm width)
Carburetor overall dimensions: 70mm length, 37mm height
Carburetor overall dimensions (70mm length, 37mm height)

4. Package Contents

The package includes:

  • 1 x Walbro WT-793 / WT-793-1 Carburetor

5. Setup & Installation

This carburetor is designed for easy installation. Follow these general steps for installing the carburetor on your DLE 22cc or 30cc R/C Air Plane Motor:

  1. Install the Carburetor Oil Needle: Carefully insert the oil needle into its designated position within the carburetor body.
  2. Connect to Air Filter and Engine Cylinder Head: Securely attach the carburetor to the engine's air filter assembly and then to the engine cylinder head. Ensure all connections are tight to prevent air leaks.
  3. Install the Carburetor Damper Line: Connect the damper line to the appropriate port on the carburetor.

For visual guidance, please refer to the product video:

Product overview video showing various angles of the carburetor.

Additional views of the carburetor for reference:

Carburetor front view
Front view of the carburetor.
Carburetor side view
Side view of the carburetor.
Carburetor top view
Top view of the carburetor.
Carburetor bottom view
Bottom view of the carburetor.

6. Operation

The carburetor's primary function is to mix air and fuel in the correct ratio for combustion in the engine. Once installed, ensure proper fuel flow and air intake. Adjustments to the carburetor (e.g., idle speed, high/low-speed mixture) should be made according to your engine's specific requirements and manufacturer guidelines. Incorrect adjustments can lead to poor engine performance or damage.

7. Maintenance

Regular maintenance is crucial for the longevity and optimal performance of your carburetor:

  • Cleaning: Periodically clean the carburetor, especially if the engine experiences performance issues. Use a carburetor cleaner spray and follow product instructions.
  • Fuel Filter: Ensure your fuel system has a clean fuel filter to prevent debris from entering the carburetor.
  • Air Filter: A clean air filter is essential for proper air-fuel mixture. Inspect and clean or replace the air filter regularly.
  • Storage: If storing the engine for an extended period, drain the fuel from the carburetor or use a fuel stabilizer to prevent gumming and clogging.

8. Troubleshooting

If you encounter issues with your engine's performance after carburetor installation, consider the following common problems:

  • Engine Not Starting: Check for proper fuel supply, spark plug condition, and ensure the carburetor is receiving fuel. Verify all connections are secure.
  • Poor Idling/Stalling: Adjust the idle speed screw. Check for vacuum leaks around the carburetor mounting.
  • Lack of Power/Rough Running: This could indicate an incorrect air-fuel mixture. Adjust the high and low-speed mixture screws as per your engine's manual. Ensure the air filter is clean.
  • Fuel Leaks: Inspect fuel lines, gaskets, and the carburetor body for any signs of leakage. Replace worn or damaged components.

If problems persist, consult a qualified technician or refer to your engine's specific service manual.

9. User Tips

  • Always use fresh, clean fuel mixed to the correct ratio for 2-stroke engines.
  • When making adjustments, do so incrementally and test the engine's response.
  • Consider professional installation if you are unfamiliar with engine mechanics to ensure optimal performance and safety.

10. Warranty & Support

For detailed product information and support, you may refer to the official user manual PDF provided by the seller: User Manual (PDF).

For any specific inquiries or technical assistance, please contact the manufacturer or seller directly.

Manufacturer Information

Manufacturer: Fujian Ouneng Trading Co., Ltd.

Address: CN No. 225, Zhongshan Branch Road, Fuding City, Ningde City, Fujian Province

Manufacturer E-mail: 821042043@qq.com

Batch Number: SMTOUNENG001

EC REP (European Authorized Representative):

  • Company Name: MJCM SARL
  • Company Address: 78 avenue des Champs Elysees Bureau 326, PARIS, FR (France)
  • Email Address: mjcm190928@gmail.com

Made in China

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.