1. Product Overview
The SMAEL 8007 is a robust analog-digital sport watch designed for durability and functionality. It features a dual time display, stopwatch, alarm, LED backlight, and is shock-resistant and water-resistant up to 50 meters.

Image: SMAEL 8007 Sport Watch, front view.
Video: Showcasing the SMAEL 8007 watch in various colors and on-wrist views.
2. Setup and Initial Use
2.1 Button Functions
- LIGHT (A Key): Activates the EL backlight.
- MODE (B Key): Cycles through different operational modes.
- RESET (C Key): Used for resetting values or viewing split times in chronograph mode.
- START/STOP (D Key): Starts/stops functions like chronograph or adjusts settings.
2.2 Time and Date Setting
- From the normal time display mode, press the MODE (B) key three times to enter the time setting mode. The seconds will flash. Press START/STOP (D) to zero the seconds.
- Press RESET (C) to move to the hour setting. The hours will flash. Press START/STOP (D) to adjust the hour. (Pressing D repeatedly will cycle between 12-hour and 24-hour formats).
- Press RESET (C) again to move to the minute setting. The minutes will flash. Press START/STOP (D) to adjust the minutes.
- Press RESET (C) again to move to the month setting. The month will flash. Press START/STOP (D) to adjust the month.
- Press RESET (C) again to move to the date setting. The date will flash. Press START/STOP (D) to adjust the date.
- Press RESET (C) again to move to the day of the week setting. The day will flash. Press START/STOP (D) to adjust the day.
- Press MODE (B) to exit the setting mode and return to the normal time display.
2.3 Battery
The watch comes with a battery included. No user-serviceable battery replacement instructions are provided. For battery replacement, it is recommended to consult a professional watch repair service.
3. Operating Instructions
3.1 Mode Conversion
Press the MODE (B) key to cycle through the following modes:
- Normal Time Display
- Chronograph (Stopwatch) Mode
- Alarm Mode
- Time Setting Mode
3.2 Chronograph (Stopwatch) Function
- From normal time display, press MODE (B) once to enter Chronograph mode.
- Press START/STOP (D) to start the stopwatch.
- Press START/STOP (D) again to stop the stopwatch.
- To record split times, press RESET (C) while the stopwatch is running. The display will show the split time. Press RESET (C) again to return to the running stopwatch.
- To reset the stopwatch to zero, ensure it is stopped, then press RESET (C).
3.3 Alarm Setting
- From normal time display, press MODE (B) twice to enter Alarm mode.
- Press RESET (C). The alarm hour will flash. Press START/STOP (D) to adjust the hour (pay attention to AM/PM if in 12-hour format).
- Press RESET (C) again. The alarm minutes will flash. Press START/STOP (D) to adjust the minutes.
- Press MODE (B) to exit alarm setting and return to normal time display.
3.4 Alarm and Hourly Chime ON/OFF
- From normal time display, press MODE (B) twice to enter Alarm mode.
- Press START/STOP (D) to toggle the alarm (AL) and hourly chime (SIG) functions ON or OFF.
- If