1. Introduction
The Dooya DC92 is an original 5-channel hand-operate remote controller designed for use with Dooya RF433 curtain motors. This remote provides convenient control over your automatic curtain systems, allowing you to manage up to five individual or grouped curtain motors. It is compatible with various Dooya motor models, including KT320E, DT52E, KT82TN, and DT360E.
2. Product Overview
The DC92 remote control features a sleek design with clearly marked buttons for intuitive operation. It allows for precise control of your curtain motors with its 5-channel capability.

Figure 1: Front view of the Dooya DC92 5-channel remote control.

Figure 2: Angled view of the Dooya DC92 5-channel remote control.
Figure 3: Dooya DC90 Series remote controls comparison and DC92 specifications.
3. Specifications
| Feature | Detail |
|---|---|
| Model | DC92 |
| Brand | DOOYA |
| Channels | 5-channel emitter |
| Power Supply | 12V (1 unit 27A12V battery) |
| Battery Service Life | > 2 years |
| Max Receivers per Channel | 20 |
| Emission Distance (Outdoor) | 200 meters |
| Emission Distance (Indoor) | 35 meters |
| Emission Frequency | 433.90MHz ± 100KHz |
| Working Temperature | 0°C ~ +50°C |
| Battery Included | No |
| Certification | CE |
4. Setup
4.1 Battery Installation
The Dooya DC92 remote control requires one 12V 27A battery (also known as 27A12V). This battery is typically not included due to shipping restrictions and must be purchased separately from a local market.
- Locate the battery compartment on the back of the remote control.
- Open the battery compartment cover.
- Insert one 12V 27A battery, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
4.2 Pairing with Dooya Motors
To control your Dooya curtain motors, the DC92 remote control must be paired with them. The specific pairing procedure can vary depending on the model of your Dooya curtain motor. Please refer to the instruction manual provided with your Dooya curtain motor for detailed pairing instructions. Generally, this involves a sequence of button presses on both the motor and the remote control.
5. Operating Instructions
The DC92 remote control allows you to operate up to five channels, each capable of controlling a single motor or a group of motors.
- Channel Selection: Use the channel selection buttons (usually numbered or indicated by dots) to choose the desired channel (1-5) you wish to control. The active channel is typically indicated by an LED light or a display.
- Open/Up: Press the 'Up' button to open the curtain or move it upwards.
- Close/Down: Press the 'Down' button to close the curtain or move it downwards.
- Stop: Press the 'Stop' button to halt the curtain's movement at any desired position.
6. Maintenance
6.1 Battery Replacement
The battery in your DC92 remote control has an estimated service life of over 2 years. When the remote's performance degrades (e.g., reduced range, inconsistent response), it's time to replace the battery.
- Open the battery compartment cover as described in Section 4.1.
- Remove the old 12V 27A battery.
- Insert a new 12V 27A battery, observing correct polarity.
- Close the battery compartment cover.
Dispose of old batteries responsibly according to local regulations.
6.2 Cleaning
Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or immerse the remote in water.
7. Troubleshooting
- Remote not responding: Check if the battery is correctly installed and has sufficient charge. Replace the 12V 27A battery if necessary.
- Curtain motor not responding: Ensure the remote is paired correctly with the motor. Refer to your motor's manual for pairing instructions. Check if the motor has power.
- Reduced operating range: Replace the battery. Ensure there are no significant obstructions between the remote and the motor. The indoor emission distance is approximately 35 meters.
- Interference: The remote operates on 433.90MHz. If you experience interference, ensure no other devices operating on similar frequencies are too close.
8. User Tips
- Battery Type: Always use a 12V 27A battery for this remote. It's a common battery type, but ensure you purchase the correct one locally as it's often not included with the remote.
- Compatibility: This remote is specifically designed for Dooya RF433 motors. Ensure your motor is compatible before attempting to pair.
- Motor Manual: For detailed pairing instructions and advanced motor functions, always consult the instruction manual that came with your Dooya curtain motor.
- Range Considerations: While the outdoor range is up to 200 meters, indoor range is typically around 35 meters. Walls and other obstacles can significantly reduce this distance.
9. Warranty and Support
For any issues, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase records for reference.