1. Introduction
Thank you for choosing the ROCKBROS YSZ1808 Cycling Bike Computer Mount. This versatile mount is designed to securely hold your bike computer, action camera, or headlight on your bicycle handlebars, providing an optimal viewing angle and reducing wind resistance. Made from high-strength aluminum alloy, it offers durability and a lightweight design for an enhanced riding experience.
2. Package Contents
Please verify that all the following components are included in your package:
Image: All components included in the ROCKBROS YSZ1808 mount kit, laid out for inspection.
- Aluminum alloy bracket
- Light holder
- Gasket (for handlebar clamp)
- Rubber strap (for securing devices)
- Pedestal 1 (for specific computer types)
- Pedestal 2 (for specific computer types)
- Allen wrench (for installation)
3. Specifications
| Feature | Specification |
|---|---|
| Model Number | YSZ1808 |
| Brand Name | ROCKBROS |
| Material | Aluminum alloy |
| Size (Handlebar Clamp) | Fits 31.8 mm bars |
| Length | Approximately 12.6 cm |
| Weight | 53g |
| Stopwatch and Accessories Type | Wireless Stopwatch |
| Compatibility | Garmin / iGPSPORT / Bryton cycling computers |
| Additional Holders | GoPro holder and light holder included |
| Certification | CE |
Image: Side view of the mount with dimensions, showing 12.6cm length and 31.8mm clamp diameter.
4. Installation Guide
Follow these steps to properly install your ROCKBROS Bike Computer Mount:
Video: A demonstration of the ROCKBROS mount's features, installation, and compatibility with various devices.
Image: A visual guide showing the four steps to install the mount on a bicycle handlebar.
- Step 1: Open the Clamp
Use the provided Allen wrench to loosen the screw on the handlebar clamp. Gently open the clamp. - Step 2: Position the Gasket
Place the rubber gasket inside the clamp to protect your handlebar and ensure a snug fit. - Step 3: Attach to Handlebar
Position the mount on your 31.8mm handlebar. Ensure the mount is centered and at your desired angle. - Step 4: Secure the Clamp
Tighten the screw with the Allen wrench until the mount is firmly secured to the handlebar. Do not overtighten.
5. Operating Instructions
5.1 Attaching a Bike Computer
The mount comes with two pedestals for different bike computer types. Select the appropriate pedestal for your device (e.g., Garmin, iGPSPORT, Bryton). Align your bike computer with the chosen pedestal on the mount and twist it clockwise until it locks securely into place.
Image: A bike computer securely attached to the ROCKBROS mount on a handlebar.
5.2 Attaching a GoPro/Action Camera
To attach an action camera, use the included GoPro holder. Secure the GoPro holder to the bottom of the main mount using the provided screw. Then, attach your GoPro or compatible action camera to the holder.
Image: A GoPro action camera mounted underneath the bike computer mount.
5.3 Attaching a Headlight
For a headlight, use the included light holder. Attach the light holder to the bottom of the main mount. Insert your bicycle headlight into the holder, ensuring it is firmly seated.
Image: A bicycle headlight mounted underneath the bike computer mount.
5.4 Compatibility
This mount is compatible with a wide range of cycling computers, including models from Garmin (e.g., EDGE 820, 520, 510, 500, 25, 20), iGPSPORT (e.g., IGS618E, IGS50E, IGS20E), and Bryton. The unique sunken design ensures the computer plane is parallel to the handlebar, optimizing aerodynamics.
Image: Examples of compatible bike computers from iGPSPORT, Garmin, and Bryton.
6. Maintenance
- Cleaning: Wipe the mount with a soft, damp cloth to remove dirt and grime. Avoid using harsh chemicals or abrasive cleaners that could damage the aluminum alloy finish.
- Inspection: Periodically check all screws and connections to ensure they are tight. If any part appears loose, re-tighten it using the appropriate Allen wrench.
- Storage: If removing the mount for extended periods, store it in a dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
- Mount feels loose on handlebar: Ensure the handlebar clamp screws are sufficiently tightened. If still loose, check if the rubber gasket is correctly positioned or if a thicker gasket is needed for smaller handlebar diameters (though this mount is designed for 31.8mm).
- Device (computer, camera, light) feels loose on holder: Ensure the device is properly aligned and twisted into its respective pedestal or holder until it clicks or feels secure. Check for any debris preventing a flush fit.
- Mount is rattling: Verify all components are securely fastened. Check the main handlebar clamp and any accessory holders for tightness.
8. User Tips
- Before each ride, quickly check that your bike computer, action camera, or headlight is securely attached to the mount.
- Position the mount to ensure your bike computer is easily visible without obstructing your view of the road.
- When attaching accessories like a GoPro or headlight, ensure they do not interfere with your bike's cables or other components.
- The L-shaped design is intended to optimize viewing and reduce wind resistance; experiment with its angle to find your preferred setup.
9. Warranty and Support
For any questions, concerns, or support regarding your ROCKBROS YSZ1808 Cycling Bike Computer Mount, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.
