1. Product Overview
The UGREEN Bluetooth 5.1 2-in-1 Audio Transmitter & Receiver is a versatile device designed to add Bluetooth functionality to your audio systems. It can operate in two modes: Transmitter (TX) mode to send audio from non-Bluetooth devices to Bluetooth headphones/speakers, and Receiver (RX) mode to receive audio from Bluetooth-enabled devices to non-Bluetooth speakers/car stereos.
- Bluetooth 5.1: Ensures stable signal transmission with a range of up to 10 meters.
- 2-in-1 Functionality: Easily switch between Transmitter (TX) and Receiver (RX) modes with a single button.
- SBC Audio Decoding: Delivers clear and high-quality stereo sound.
- Plug & Play: Driver-free installation for convenient use.
- Handsfree Calling: Supported in RX mode for car use.


2. Package Contents
Please check the box for the following items:
- 1x UGREEN Bluetooth Audio Receiver & Transmitter
- 1x 1m 3.5mm Audio Cable
- 1x User Manual

3. Setup and Connection
3.1 General Connection
- Connect the 3.5mm audio jack of the adapter to the audio input/output port of your device (e.g., car stereo, TV, speaker).
- Plug the USB-A connector of the adapter into a USB power source (e.g., USB charger, car USB port, TV USB port). Ensure the power supply is DC5±0.25V, ≥200mA (5V/1A recommended).
3.2 Mode Selection
The device features a mode switch (TX/RX) on its side. Toggle this button to select the desired operating mode:
- TX (Transmitter) Mode: To send audio from a non-Bluetooth device to a Bluetooth receiving device (e.g., TV to Bluetooth headphones).
- RX (Receiver) Mode: To receive audio from a Bluetooth-enabled device to a non-Bluetooth audio system (e.g., Phone to car stereo).

4. Operating Instructions
4.1 Transmitter (TX) Mode
Use this mode to upgrade non-Bluetooth devices like computers, TVs, or MP3/MP4 players to transmit audio wirelessly to Bluetooth headphones, speakers, or AirPods.
- Switch to TX: Toggle the mode switch to the 'TX' position.
- Connect Device: Connect the 3.5mm audio cable from the adapter to the audio output (e.g., headphone jack) of your non-Bluetooth device (e.g., TV).
- Pairing: Turn on your Bluetooth receiving device (headphones/speaker) and put it into pairing mode. The adapter's indicator light will blink red and blue alternately.
- Enjoy: Once paired, the indicator light will slowly blink blue (1 time/10 seconds), and audio from your source device will be transmitted to your Bluetooth device.


4.2 Receiver (RX) Mode
Use this mode to add Bluetooth functionality to non-Bluetooth audio systems like wired speakers, amplifiers, or car radios, allowing them to receive audio from your phone, tablet, or laptop.
- Switch to RX: Toggle the mode switch to the 'RX' position.
- Connect Device: Connect the 3.5mm audio cable from the adapter to the audio input (e.g., AUX-in) of your non-Bluetooth audio system (e.g., car stereo).
- Pairing: On your Bluetooth-enabled device (phone/tablet), enable Bluetooth, search for "UGREEN-60300", and select it to connect. The adapter's indicator light will blink red and blue alternately during pairing.
- Enjoy: Once paired, the indicator light will slowly blink blue (1 time/10 seconds), and your audio system will play music from your phone.


4.3 Dual Pairing (RX Mode Only)
In Receiver (RX) mode, the adapter supports connecting two Bluetooth devices simultaneously. This allows you to share audio playback with another person or switch between two audio sources without re-pairing.
Note: Transmitter (TX) mode does not support connecting two earphones simultaneously.

4.4 LED Indicator Light Status
The LED indicator provides visual feedback on the device's status:
| Status | Indicator |
|---|---|
| Plug Into The USB Device | Blue Light Blinks for 1 Second |
| Pairing | Red and Blue Lights Blink Alternately |
| Pairing Succeeded | Slow Blue Blinking (1 Time/10 Seconds) |

5. Specifications
| Feature | Specification |
|---|---|
| Brand Name | UGREEN |
| Model Number | CM523 (60300) |
| Product Name | Bluetooth Receiver Transmitter / Bluetooth AUX Adapter |
| Working Mode | Receive mode (RX) & Transmit mode (TX) |
| Bluetooth Version | Bluetooth 5.1 |
| Bluetooth Protocol (RX) | A2DP |
| Bluetooth Protocol (TX) | A2DP, AVRCP, HSP, HFP |
| Operating Frequency | 2.400GHz-2.4835GHz |
| Audio Encoding Technology | SBC |
| Transmission Distance | 10m (No Blocking) |
| SNR (TX) | ≥80dB |
| SNR (RX) | ≥90dB |
| Response Frequency | 20-20KHz |
| Audio Sample Rate | Supports up to 16bit/44.1kHz |
| Power Supply Requirements | USB-A interface power supply, DC5±0.25V, ≥200mA |
| Driver Installation | Plug & Play (No Installation Required) |
| Power On/Off Operation | Plug in and power on / Unplug and power off |
| Function 1 | Power isolation function |
| Function 2 | Force pairing function |
| Function 3 | Button reconnection function |
| Function 4 | Factory settings can be restored by pressing the function key 5 times in a row in power-on mode. |
| Function 5 | Indicator light |
| Function 6 | RX mode support connect 2 devices at one time |
| Interface | 3.5 MM, USB |
| Dimensions | 48mm (Length) x 19mm (Width) x 8.5mm (Thickness) |
| Net Weight | 8.5g |
| Total Weight | 41.3g |
| Package Size | 83*113*14mm |
| Certification | CE, FCC, SRRC, IC, TELEC, BQB |

6. Maintenance
To ensure the longevity and optimal performance of your UGREEN Bluetooth Adapter, please follow these general maintenance guidelines:
- Keep the device dry and away from moisture.
- Avoid extreme temperatures.
- Clean the device gently with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Store the device in a cool, dry place when not in use.
7. Troubleshooting
If you encounter issues with your UGREEN Bluetooth Adapter, try the following solutions:
7.1 Common Issues & Solutions
- Product Fails to Pair or Light Does Not Light Up:
- Check Power Supply: Ensure the USB interface power supply is normal. It is recommended to connect to a 5V/1A power source.
- Check Mode: Verify that the adapter is switched to the correct mode (TX for transmitting, RX for receiving) using the side button.
- Verify Pairing Operation: Refer to the specific pairing steps for TX or RX mode in Section 4.
- Restore Factory Settings: In power-on mode, press the multifunction button 5 times in a row to restore factory settings, then attempt pairing again.
- No Audio or Poor Audio Quality:
- Ensure both the 3.5mm audio cable and USB-A power cable are securely connected.
- Check the volume levels on both the source device and the receiving device.
- Confirm that the adapter is successfully paired (slow blue blinking LED).
- If using in a car and experiencing humming/background noise, a ground loop isolator (not included) may be required in the AUX line.
- Short-term Delays or Sound Jumps:
- Ensure the transmission distance is within 10 meters and there are no significant obstructions.
- Minimize interference from other wireless devices.
- Cannot Connect Two Headphones in TX Mode:
- TX mode does not support dual pairing. Dual pairing is only supported in RX (Receiver) mode.
If these steps do not resolve the issue, please contact UGREEN customer support for further assistance.
8. User Tips
- Car Use: For car stereos without Bluetooth, this adapter is an excellent solution. Remember to connect both the USB for power and the 3.5mm AUX cable for audio. If your car only has a USB port and no AUX, this product cannot be used for audio transmission without the 3.5mm connection.
- TV Connectivity: To connect to a TV, ensure your TV has a 3.5mm audio output jack. The adapter will transmit stereo sound to your Bluetooth headphones or speakers.
- Optimal Power: Always use a stable 5V/1A USB power adapter for the best performance and to prevent power-related issues.
- Pairing Simplicity: For TX mode, ensure your receiving Bluetooth device (headphones/speaker) is actively in pairing mode before attempting to connect the adapter.
- No Battery: This device does not have a built-in battery and requires continuous USB power to operate.
9. Warranty and Support
UGREEN products come with a standard warranty. For detailed warranty information, technical support, or any product-related inquiries, please refer to the official UGREEN website or contact the seller directly. Keep your purchase receipt for warranty claims.