Samsung WF-R105AC, AS 1056C, B105AR, DC41-00035A

Contents

Instruction Manual

Samsung Washing Machine Computer Board

Models: WF-R105AC, AS 1056C, B105AR | Part Number: DC41-00035A

1. Product Overview

This document provides essential information for the installation, operation, maintenance, and troubleshooting of the replacement computer board for Samsung washing machines. This board is a critical component responsible for controlling various functions and cycles of your appliance.

Samsung Washing Machine Computer Board, showing front with display and rotary selector, and back with electronic components.
Figure 1: Front (top) and Rear (bottom) view of the Samsung Washing Machine Computer Board. The front features a digital display (showing '8888') and a rotary program selector, while the rear shows various integrated circuits and components.

2. Safety Information

  • Always disconnect the washing machine from the power supply before attempting any installation or maintenance.
  • Installation should only be performed by a qualified technician or individuals with experience in appliance repair.
  • Wear appropriate personal protective equipment (PPE), such as gloves and eye protection.
  • Ensure all connections are secure and correctly oriented to prevent damage to the board or the washing machine.
  • Do not attempt to modify the computer board.

3. Setup and Installation

This computer board is a replacement part. Proper installation is crucial for the correct functioning of your washing machine. Refer to your specific washing machine model's service manual for detailed, step-by-step instructions on accessing and replacing the control board.

General Installation Steps (Consult specific service manual for details):

  1. Power Disconnection: Unplug the washing machine from the electrical outlet and turn off the water supply.
  2. Access the Control Panel: Depending on your washing machine model, you may need to remove the top panel or the entire control panel assembly to access the old computer board.
  3. Disconnect Wiring: Carefully photograph or label all wires connected to the old board before disconnecting them. Pay attention to the orientation and position of each connector.
  4. Remove Old Board: Unmount the old computer board from its housing.
  5. Install New Board: Mount the new computer board in the same position as the old one.
  6. Reconnect Wiring: Reconnect all wires to the new board, ensuring they match the labels or photographs taken earlier. Verify that all connections are firm and secure.
  7. Reassemble: Reattach any panels or covers removed during the process.
  8. Test: Restore power and water supply. Perform a test cycle to ensure the washing machine operates correctly.

4. Operating Instructions

The computer board functions as the central control unit for your washing machine. Once installed, its operation is integrated into the washing machine's user interface (buttons, rotary selector, display). To operate your washing machine:

  • Power On: Press the power button on your washing machine.
  • Select Cycle: Use the rotary selector (as seen in Figure 1) or program buttons to choose your desired wash cycle (e.g., Normal, Delicates, Heavy Duty).
  • Adjust Settings: Modify settings such as water temperature, spin speed, and rinse options using the corresponding buttons. The digital display (e.g., '8888' in Figure 1) will show cycle time, error codes, or other relevant information.
  • Start Cycle: Press the Start/Pause button to begin the wash cycle.

For detailed instructions on specific wash cycles and features, please refer to your Samsung washing machine's user manual.

5. Maintenance

The computer board itself requires minimal maintenance. However, proper care of your washing machine can extend the life of all its components, including the control board.

  • Keep Dry: Ensure the control panel area remains dry. Moisture can damage electronic components.
  • Clean Gently: When cleaning the washing machine's exterior, use a soft, damp cloth. Avoid harsh chemicals or excessive water near the control panel.
  • Avoid Physical Impact: Protect the control panel from bumps or impacts that could damage the internal board.
  • Ventilation: Ensure the washing machine has adequate ventilation to prevent overheating of internal components.

6. Troubleshooting

If your washing machine is not functioning correctly after installing the new computer board, consider the following troubleshooting steps:

Common Issues:

  • No Power/Display:
    • Check if the washing machine is properly plugged into a working electrical outlet.
    • Verify the circuit breaker has not tripped.
    • Ensure all power connections to the board are secure.
  • Incorrect Cycle Operation:
    • Confirm that the correct wash cycle and settings have been selected.
    • Check for any error codes displayed on the digital screen (e.g., '8888' or other alphanumeric codes). Refer to your washing machine's user manual for error code interpretations.
    • Ensure water supply is adequate and hoses are not kinked.
  • Buttons Unresponsive:
    • Ensure the control panel is not locked (some models have a child lock feature).
    • Check for any visible damage to the buttons or rotary selector.

If the problem persists, it is recommended to consult a professional appliance repair technician.

7. Specifications

Feature Detail
Product Type Washing Machine Computer Board / Parts
Brand Compatibility Samsung
Compatible Models WF-R105AC, AS 1056C, B105AR
Part Number DC41-00035A
Origin Mainland China
High-concerned chemical None
Package Dimensions (Approx.) Length: 25 cm, Width: 22 cm, Height: 10 cm
Package Weight (Approx.) 1.5 kg

8. Warranty and Support

For warranty information and technical support, please refer to the terms provided by your seller at the time of purchase. It is recommended to retain your proof of purchase for any warranty claims.

If you encounter issues that cannot be resolved using the troubleshooting guide, please contact the seller or a certified appliance repair professional for assistance.

9. User Tips

While no specific user reviews or Q&A were provided, general tips for electronic replacement parts include:

  • Verify Compatibility: Always double-check the model and part numbers to ensure the replacement board is compatible with your specific washing machine.
  • Handle with Care: Electronic components are sensitive. Avoid touching circuit board components directly and handle the board by its edges.
  • Static Discharge: Before handling the board, discharge any static electricity from your body by touching a grounded metal object.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.