1. Introduction
The MatSee Plus PC321 is a smart energy meter designed to monitor electricity consumption and production in single or three-phase electrical systems. It connects via WiFi to the Tuya Smart Life app, allowing users to track real-time energy data, view historical statistics, and create smart automation scenes. This manual provides essential information for the safe installation, operation, and maintenance of your device.

2. Important Safety Information
- The power clamp must be installed and serviced only by a qualified electrical personnel.
- Do not touch the terminals of the device during testing.
- Turn off all power supply to this equipment before installation or servicing.
- Always use a properly rated voltage sensing device to confirm power is off.
- Replace all devices, doors, and covers before applying power to the equipment.
- This is a high Amp item; installation requires a certified and professional electrician.
- The meter requires the measured device to have a neutral wire. Without a neutral wire, it cannot accurately measure voltage, current, and power.
- Failure to follow these instructions will result in death or serious injury.
3. Product Features
- Compatible with single-phase and three-phase electricity systems.
- Utilizes three current transformers (CTs) for comprehensive monitoring.
- Measures real-time Voltage, Current, Power Factor, Active Power, and total energy consumption.
- Displays the device's temperature within the app.
- Suitable for both residential and commercial applications.
- Provides real-time monitoring of total current, power, and KWh.
- Shows individual phase (A, B, C) voltage, current, power, and KWh consumption.
- Records hourly, daily, monthly, and yearly power consumption (KWh) for total and each phase separately.
- Supports creating smart scenes and automations based on power generation or consumption thresholds.
- Allows exporting power consumption data for analysis.
4. Specifications
| Attribute | Value |
|---|---|
| Power Source | AC |
| Battery Included | No |
| Wireless Communication | Yes (Wi-Fi) |
| Inbox Adaptor | No |
| High-concerned Chemical | None |
| Communication Method | Wi-Fi |
| State of Assembly | Ready-to-Go |
| Brand Name | MatSee Plus |
| Origin | Mainland China |
| Certification | CE, RoHS |
| Operating Voltage | 100-240V AC 50/60 Hz |
| Wireless Frequency | 2.4GHz |
| Operating Humidity | 90% non-condensing |
| Report Cycle | 5 seconds |
| CT Type Options | 80A, 120A, 200A, 300A |
| Operating Temperature | -20 ℃ - +55 ℃ |
| Dimension | 86x86x37mm |
| 80A CT Clamp Diameter | 10mm |
| 120A CT Clamp Diameter | 16mm |
| 200A CT Clamp Diameter | 20mm |
| 300A CT Clamp Diameter | 24mm |
5. Package Contents
- 1x Tuya Smart Life 3 Phase Bidirectional WiFi Energy KWH Meter Unit (PC321)
- 3x Current Transformers (CTs) (Amperage depends on selected model: 80A, 120A, 200A, or 300A)
- 1x WiFi Antenna
6. Setup & Installation
6.1 Pre-installation Notes
- Ensure your wireless router operates on a 2.4GHz frequency. This device is not compatible with 5GHz networks.
- A neutral wire is required for accurate voltage, current, and power measurements.
- Installation must be performed by a certified and professional electrician due to high amperage.
6.2 Mounting the Meter Unit
The meter unit can be mounted using the provided bracket. Secure the bracket to a suitable surface, then slide the meter unit onto the bracket.

6.3 Current Transformer (CT) Installation
Proper installation of the Current Transformers (CTs) is crucial for accurate readings. Ensure all three CTs are oriented in the same direction, following the arrow marked on each CT.

When measuring energy consumption, the arrow on the CT should follow the direction of the current flow. For measuring energy production (e.g., from a PV system), the arrow on the CT should oppose the direction of the current flow. In this case, the power reading will be negative, and energy generation will be accumulated.

6.4 Wiring Diagrams
Refer to the following diagrams for correct wiring connections. Always ensure the main power supply is OFF before making any connections.



6.5 App Pairing
To pair your device with the Tuya Smart Life app:
- Ensure the meter is powered on and within range of your 2.4GHz WiFi network.
- Open the Tuya Smart Life app.
- Tap the '+' icon to add a device.
- Select 'Add Device' or 'Scan' for nearby devices. If prompted, select 'Electrical' then 'Socket' or similar category.
- Enter your WiFi network name and password.
- Follow the on-screen instructions to complete the pairing process. The device's LED indicator will confirm successful pairing.
7. Operation
7.1 Real-time Monitoring
Once connected, open the Tuya Smart Life app and select your energy meter. The 'Overview' and 'Live' tabs will display real-time data for total energy consumed/produced, as well as detailed information for each phase (Voltage, Current, Power Factor, Active Power).


7.2 Electricity Statistics
The 'Usage' tab in the app provides historical electricity statistics. You can view hourly, daily, monthly, and yearly power consumption (KWh) values for the total system and for each individual phase.


7.3 Export Data
You can export your power consumption data from the 'Usage' section of the app. Select 'Export data', specify the desired time range (hour, day, month), and enter an email address to receive the data.

7.4 Create Scenes (Automations)
The Tuya Smart Life app allows you to create custom automation scenes based on the meter's readings. For example, you can set a condition where if the power generation reaches a certain threshold (e.g., 3000W), a connected Tuya switch for a water heater is automatically turned on.


8. Maintenance
- Keep the device clean and dry. Avoid exposure to moisture or extreme temperatures.
- Regularly inspect all wiring connections to ensure they are secure and free from damage.
- Do not attempt to open or repair the device yourself. Refer to qualified personnel for any issues.
9. Troubleshooting
- Device not connecting to WiFi: Ensure your router is 2.4GHz. Verify the WiFi password. If issues persist, try resetting the device to enter EZ mode for pairing.
- Incorrect readings or no data: Check that all CTs are installed correctly, following the arrow direction for consumption or opposing for production. Confirm the neutral wire is properly connected.
- No data in the app: Verify the device's WiFi connection status and ensure it is powered on.
- Bidirectional produced energy records not working: While the device is designed for bidirectional measurement, some users have reported issues with production data or requiring specific integrations (e.g., LocalTuya for Home Assistant). Double-check CT installation direction for production measurement (arrow opposite current flow) and consult app settings.
9.1 Resetting the Device
To restore factory settings and clear energy data, press and hold the reset button for 5 seconds. The LED indicator will flash three times quickly, and the device will enter EZ mode for 3 minutes, ready for re-pairing.

10. User Tips
- This meter can measure 3 phases, but it can also be used with only 2 phases, and the readings for each phase are independent.
- The device is compatible with Home Assistant, though some users report needing LocalTuya integration for full functionality.
- You can program actions in Tuya/Smart Life based on detected power. For example, if the meter detects a certain power generation (e.g., from solar panels), it can trigger another WiFi switch to turn on an electric water heater.
11. Warranty & Support
For any issues not covered in this manual or for technical assistance, please contact MatSee Plus customer support. Keep your purchase receipt for warranty claims.