MEKEDE VW-RZ-58

Contents

MEKEDE Raise VW-RZ-58 CANBUS BOX Instruction Manual

For Android Car Multimedia Navigation DVD Players in Volkswagen, Skoda, and Seat Vehicles

1. Introduction

The MEKEDE Raise VW-RZ-58 CANBUS BOX is designed to facilitate the integration of aftermarket Android car multimedia navigation systems into various Volkswagen, Skoda, and Seat vehicles. This CANBUS decoder box and its accompanying wiring harness enable the Android head unit to communicate with the vehicle's CAN-BUS system, allowing for the proper functioning of features such as steering wheel controls, reverse detection, and illumination synchronization.

2. Product Overview

This product acts as an interface between your vehicle's electrical system and your new Android multimedia head unit. It decodes the CAN-BUS signals from your car, translating them into commands that your Android unit can understand. This ensures that essential vehicle functions and controls remain operational after upgrading your car's audio-visual system.

3. Specifications

FeatureSpecification
Brand NameMEKEDE
ModelRaise VW-RZ-58
Special FeaturesSupport Can-Bus
Voltage12 V
Item Weight0.15 kg
CertificationCE
MaterialGood
Package Length8 cm
Package Width8 cm
Package Height8 cm
TF/Micro SD Slot0 (Refers to the CANBUS box itself)
High-concerned chemicalNone
Compatible Vehicle Brands/ModelVolkswagen, Skoda, Seat cars

Note: Specifications like 'Din', 'Interface', 'Operating System', 'Out Power', 'Digital Media Format', 'Display Size', and 'ROM' typically refer to the compatible Android multimedia head unit, not the CANBUS box itself.

4. Package Contents

The package includes the following components:

  • MEKEDE Raise VW-RZ-58 CANBUS Decoder Box
  • Specific wiring harness (e.g., 40PIN cable, 52PIN cable, VW cable, VW CAN BUS RZ-58) tailored to your vehicle's connection type.
MEKEDE Raise VW-RZ-58 CANBUS Decoder Box
Figure 1: MEKEDE Raise VW-RZ-58 CANBUS Decoder Box (front view with label)
MEKEDE Raise CANBUS Decoder Box top and bottom view
Figure 2: MEKEDE Raise CANBUS Decoder Box (top and bottom view)

5. Installation and Setup

Installation of the CANBUS box and wiring harness requires careful attention to detail. It is recommended that installation be performed by a qualified professional to ensure correct wiring and prevent damage to your vehicle or the product.

5.1. Pre-Installation Checks

  • Vehicle Compatibility: Confirm that the specific CANBUS box and harness variant (e.g., 40PIN, 52PIN, VW CAN BUS RZ-58) is compatible with your exact vehicle model, year, and existing wiring.
  • Head Unit Compatibility: Ensure your Android multimedia head unit is designed to work with an external CANBUS decoder and has the necessary 16-pin power port for connection.
Warning note about 16-pin port compatibility for power cord
Figure 3: Important note regarding 16-pin power cord compatibility for the head unit.

5.2. Wiring Harness Identification

Identify the correct wiring harness based on your vehicle's existing connectors. Common types include 40-Pin and 52-Pin harnesses.

General wiring harness with CANBUS box and main connectors
Figure 4: General wiring harness with CANBUS box and main connectors.
40-Pin wiring harness with integrated CANBUS box
Figure 5: 40-Pin wiring harness with integrated CANBUS box.
52-Pin wiring harness with integrated CANBUS box
Figure 6: 52-Pin wiring harness with integrated CANBUS box.

5.3. Connection Steps

  1. Disconnect Battery: Before starting any electrical work, disconnect the vehicle's negative battery terminal to prevent short circuits.
  2. Connect CANBUS Box: Attach the MEKEDE Raise VW-RZ-58 CANBUS Decoder Box to the designated connector on the wiring harness.
  3. Connect to Vehicle: Plug the vehicle-specific end of the wiring harness into your car's existing wiring loom.
  4. Connect to Head Unit: Connect the other end of the wiring harness to the corresponding ports on your Android multimedia head unit, paying close attention to the 16-pin power port.
  5. Verify Pinout: Refer to the detailed pinout diagram (Figure 7) to ensure all critical connections such as power, ground, speaker outputs, steering wheel controls, reverse detection, and illumination are correctly aligned.
  6. Reconnect Battery: Once all connections are secure, reconnect the vehicle's negative battery terminal.
  7. Test Functionality: Turn on the ignition and test all functions of the Android head unit, including audio, steering wheel controls, reverse camera activation, and illumination.
Detailed pinout diagram for P1 connector
Figure 7: P1 Connector Pinout Diagram. This diagram shows the pin assignments for the main connector, including Speaker Front Left/Right (+/-), Steering wheel control (study-1, study-2), Reverse detecting line, ACC Key Switch, GND, B+, ANT power, and ILL small lights detecting.

6. Operation

The MEKEDE Raise VW-RZ-58 CANBUS BOX operates passively by decoding signals. Once correctly installed, it enables your Android multimedia head unit to seamlessly integrate with your vehicle's electronic systems. There are no direct user controls on the CANBUS box itself. All operational aspects, such as using steering wheel controls or viewing reverse camera feeds, are managed through your Android head unit's interface.

  • Steering Wheel Controls: After installation, configure the steering wheel controls through your Android head unit's settings menu. The CANBUS box translates the vehicle's steering wheel button presses into signals the head unit can interpret.
  • Reverse Detection: The CANBUS box provides a reverse signal to the head unit, automatically switching to the reverse camera display when the vehicle is put into reverse gear.
  • Illumination: The head unit's illumination should synchronize with your vehicle's headlights, dimming the screen when lights are on.
  • ACC/Ignition: The CANBUS box manages the ACC (Accessory) signal, ensuring the head unit powers on and off with the vehicle's ignition.

7. Troubleshooting

  • Steering Wheel Controls Not Working:
    • Verify the CANBUS box is correctly connected to the harness and the head unit.
    • Check the head unit's settings for steering wheel control configuration. Some units require manual learning or selection of a CANBUS type.
    • Ensure the correct CANBUS protocol is selected in the head unit's factory settings (if applicable).
  • Battery Drain Issue:
    • If the vehicle battery drains when the car is off, the head unit or CANBUS box might not be shutting down completely.
    • Ensure the ACC wire is correctly connected and the head unit powers off with the ignition.
    • Some head units have a 'sleep' mode that can still draw power; check head unit settings.
    • Consult a professional installer to verify wiring and power draw.
  • No Power to Head Unit:
    • Check all power connections (B+, GND, ACC) on the harness and head unit.
    • Verify vehicle fuses related to the radio/multimedia system.
    • Ensure the 16-pin power port on the head unit is fully seated.
  • Reverse Camera Not Activating:
    • Confirm the reverse detecting line from the CANBUS harness is connected to the head unit's reverse input.
    • Check the reverse camera's power supply and video signal.
  • General Compatibility Issues:
    • The CANBUS box is designed for Volkswagen, Skoda, and Seat cars. However, specific models and years (e.g., VW Passat 2015, VW Polo sedan 2018, VW Tiguan 2011, Seat Leon 1p Mk2 2008, Skoda Rapid 2014) may have variations. Always double-check compatibility before purchase and installation.
    • If you experience issues with a specific vehicle model, contact MEKEDE support with your car's exact make, model, and year.

8. User Tips

  • Verify Cable Type: Before purchasing, carefully check which specific cable type (e.g., 40PIN, 52PIN, VW cable, VW CAN BUS RZ-58) is required for your vehicle and head unit model. This is crucial for proper function.
  • Professional Installation Recommended: Due to the complexity of vehicle wiring and CANBUS systems, professional installation is highly recommended to avoid potential damage or malfunction.
  • Test All Functions: After installation, thoroughly test all integrated functions (steering wheel controls, reverse camera, illumination, power on/off) to ensure everything is working as expected.
  • Address Battery Drain Promptly: If you notice any battery drain after installation, investigate immediately. This could indicate an incorrect wiring or a head unit setting issue.

9. Warranty and Support

9.1. Warranty Information

The MEKEDE Raise VW-RZ-58 CANBUS BOX comes with a 12-month manufacturer's limited warranty for defective items. This warranty excludes damage caused by accident, abuse, misuse, or modification of the product. Accessories, including the wiring harness, come with a 3-month warranty.

Defective items must be reported and returned within the warranty period, ideally in their original packaging. You will need to provide details of the defect and your order number. The warranty does not cover repairs or replacements for items with an expired warranty.

9.2. Customer Support

For technical assistance, troubleshooting, or warranty claims, please contact the MEKEDE AUTO Official Store where you purchased the product. Provide your order details and a clear description of the issue to receive prompt support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.