BAOFENG UV-9RPLUS

Contents

Baofeng UV-9R Plus Camouflage Walkie Talkie User Manual

Model: UV-9RPLUS | Brand: BAOFENG

1. Introduction

The Baofeng UV-9R Plus is a robust dual-band handheld transceiver designed for reliable communication in various environments. Featuring IP57 dust and waterproof resistance, it can withstand immersion in one meter of water for up to 30 minutes, ensuring durability in wet conditions. This manual provides essential information for setting up, operating, and maintaining your walkie-talkie.

Front view of the Baofeng UV-9R Plus Walkie Talkie in camouflage pattern

Front view of the Baofeng UV-9R Plus Walkie Talkie.

2. Package Contents

Please check the box for the following items:

  • 1× Baofeng UV-9R Plus Dual band IP57 Waterproof radio (Camouflage)
  • 1× 2500mAh Li-ion Battery Pack
  • 1× Antenna
  • 1× Desktop Charger
  • 1× AC Adapter
  • 1× Waterproof Gasket
  • 1× Belt Clip
  • 1× Hand strap
  • 1× English User Manual
  • 1× Earphone
Diagram showing all included accessories: walkie-talkie, antenna, Li-ion battery, headset, AC adapter, charger stand, clip, lanyard, user's manual, waterproof gasket.

All items included in the package.

3. Setup Instructions

Follow these steps to prepare your walkie-talkie for use:

  1. Install the Battery: Align the battery pack with the back of the radio and slide it into place until it clicks securely.
  2. Attach the Antenna: Screw the antenna clockwise into the connector on the top of the radio until it is finger-tight.
  3. Attach the Belt Clip: Use the provided screws and screwdriver to attach the belt clip to the back of the radio.
  4. Connect the Earphone: Open the rubber cover on the side of the radio and plug the earphone connector firmly into the port.
  5. Charging the Battery: Connect the AC adapter to the desktop charger. Place the walkie-talkie (or just the battery) into the charging cradle. The indicator light on the charger will show red during charging and turn green when fully charged.

Video demonstrating unboxing, assembly, and basic functions.

4. Operating Instructions

4.1 Power On/Off

To power on or off the walkie-talkie, rotate the power/volume knob located on the top of the device. A voice prompt will indicate the power status.

4.2 Mode Selection (Frequency/Channel)

The walkie-talkie supports both Frequency Mode and Channel Mode. You can switch between these modes using the keypad or menu options. In Frequency Mode, you can manually input frequencies. In Channel Mode, you can select from pre-programmed memory channels.

4.3 Transmitting and Receiving

To transmit, press and hold the PTT (Push-To-Talk) button on the side of the radio. Speak clearly into the microphone. Release the PTT button to receive. Ensure you are on the correct frequency or channel for communication.

4.4 VOX Function

The VOX (Voice Operated Transmission) function allows for hands-free operation. When activated, the radio will automatically transmit when it detects your voice, and stop transmitting when you stop speaking. Adjust VOX sensitivity in the menu to prevent accidental transmissions.

4.5 FM Radio

The walkie-talkie includes a commercial FM radio receiver (65-108MHz). Access this feature through the menu to listen to FM broadcasts.

4.6 LED Flashlight

A built-in LED flashlight is available for illumination. Activate it via a dedicated button or menu option (refer to your specific user manual for exact controls).

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your Baofeng UV-9R Plus walkie-talkie.

  • Cleaning: Use a soft, damp cloth to clean the exterior of the radio. Do not use harsh chemicals or solvents.
  • Waterproof Gasket: Regularly inspect the waterproof gasket around the battery compartment and accessory ports for any signs of wear or damage. Ensure it is properly seated to maintain IP57 water resistance.
  • Battery Care: Charge the Li-ion battery using only the provided desktop charger and AC adapter. Avoid overcharging or completely draining the battery to prolong its lifespan. Store the battery in a cool, dry place when not in use.
  • Storage: When not in use for extended periods, remove the battery from the radio and store both in a dry, dust-free environment.

6. Troubleshooting

If you encounter issues with your walkie-talkie, try the following basic troubleshooting steps:

  • No Power: Ensure the battery is fully charged and correctly installed. Check the power/volume knob is turned on.
  • Cannot Transmit or Receive: Verify that the antenna is securely attached. Check that you are on the correct frequency or channel. Ensure the battery has sufficient charge.
  • Poor Audio Quality: Check the earphone connection if using one. Adjust the volume knob. Ensure there are no obstructions to the microphone or speaker.
  • Keypad/Display Issues: If the display is not working or the keypad is unresponsive, try turning the radio off and on again.

For more complex issues, refer to the detailed English User Manual included in your package or contact customer support.

7. Specifications

General Specifications
FeatureSpecification
Frequency Range65-108MHz (Commercial FM radio reception only), VHF: 136-174MHz (Rx/Tx), UHF: 400-520MHz (Rx/Tx)
Memory Channels128
Frequency Stability2.5ppm
Frequency Step2.5/5/6.25/10/12.5/20/25/50KHz
Antenna Impedance50 ohm
Operating Temperature-20°C ~ +60°C
Battery TypeDC7.4V 2500mAh Li-ion Battery
Consumption in Reception380mA
Consumption in Transmission≤1.4A
Mode of OperationSimplex or semi-duplex
Duty Cycle03/03/54min. (Rx/Tx/Standby)
Dimensions133.8(L)*65(W)*41.5(H)mm
Weight279g (approximate)
Transmitter Specifications
FeatureSpecification
RF Power8W/5W/2W
Type of ModulationFM
Emission Class16K Ø F3E/11K Ø F3E
Maximum Deviation≤±5KHz/ ≤±2.5KHz (W/N)
Spurious Emissions≤-60dB
Receiver Specifications
FeatureSpecification
Sensitivity0.2uV (12dB SINAD)
Intermodulation60dB
Audio Output1W
Spurious Radiation≥65dB

Note: All specifications shown are subject to change without notice.

8. User Tips

  • Range Optimization: For best range, ensure your antenna is fully extended and you have a clear line of sight to the other radio. Obstacles like buildings and dense foliage can significantly reduce range.
  • Battery Life: To maximize battery life, use the lower power settings (5W or 2W) when communicating over shorter distances.
  • Water Resistance: While IP57 rated, always ensure all port covers and the battery compartment are securely sealed before exposing the radio to water.
  • Programming: For advanced features and custom channel programming, it is recommended to use the PC programming software and cable (sold separately) as manual programming can be complex.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Baofeng website or contact the authorized seller from whom you purchased the product. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.