CCA CRA

Contents

CCA CRA Metal Wired Headset Instruction Manual

Model: CRA

Introduction

The CCA CRA Metal Wired Headset is designed to provide a high-fidelity audio experience with its advanced dynamic driver technology. Featuring a comfortable in-ear design and a built-in microphone, these earphones are suitable for various uses, from music monitoring to gaming and mobile phone calls. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your CCA CRA headset.

CCA CRA Metal Wired Headset, showing both black and clear models

Figure 1: CCA CRA Metal Wired Headset

Video 1: Product overview showcasing the ultra-thin polymer diaphragm and sound separation.

Setup

Follow these steps to properly connect the detachable cable to your CCA CRA earphones:

  1. Identify Left and Right: Distinguish the cable PIN connector for the right (R) and left (L) earphone. The cable will have 'R' and 'L' marks on the connector jacket. To identify the earphone unit itself, place it on a flat surface with the logo facing you. If the eartip is tilted to the left, it is the left earphone; if tilted to the right, it is the right earphone. The earphone units also have 'R' and 'L' marks.
  2. Align Connectors: Ensure the 'R' mark on the cable connector aligns with the 'R' earphone unit, and similarly for the 'L' side. The earphone cover with the logo side should face you, and the cable's 'L' or 'R' marks should also face you during connection.
  3. Insert Connector: Carefully insert the 0.75mm standard gold-plated PIN connector into the corresponding earphone socket.
  4. Secure Connection: The cable connector is designed for a secure fit and may require a little force to fully insert. Push firmly until it clicks into place.
Diagram showing how to connect the detachable cable to the left and right earphone units.

Figure 2: Cable connection diagram, indicating left/right and proper orientation.

Close-up diagram of inserting the 2-pin connector into the earphone.

Figure 3: Step-by-step guide for inserting the connector.

Diagram illustrating to plug the connector with a little force for a secure fit.

Figure 4: Illustration of applying slight force for a firm connection.

Operating Instructions

The CCA CRA headset features an inline microphone with control buttons for convenient audio management and calls. These functions are compatible with most mobile phones on the market.

  • Pause/Play: Short press the control button.
  • Next Song: Press the control button twice.
  • Previous Song: Press the control button three times.
  • Answer/Hang Up Call: Short press the control button during an incoming or active call.
  • Decline a Call: Long press the control button during an incoming call.
Diagram of the inline microphone control unit with button functions for calls and music.

Figure 5: Inline control functions for music and calls.

Maintenance

Proper care will extend the life and maintain the performance of your CCA CRA headset:

  • Keep Dry: Avoid exposing the earphones to moisture, sweat, or extreme temperatures.
  • Clean Eartips: Regularly remove and clean the silicone eartips with a soft, damp cloth. Ensure they are completely dry before reattaching.
  • Clean Earphone Nozzles: Gently wipe the earphone nozzles with a dry cotton swab to remove any earwax or debris. Be careful not to push debris further into the earphone.
  • Store Properly: When not in use, store the earphones in a protective case to prevent tangling, kinks in the cable, and physical damage.
  • Handle Cable with Care: The oxygen-free copper flat cable is designed for durability, but avoid excessive pulling or sharp bends.

Troubleshooting

If you encounter issues with your CCA CRA headset, try the following solutions:

  • No Sound:
    • Ensure the 3.5mm connector is fully inserted into your audio device.
    • Check the volume settings on your audio device.
    • Test the earphones with another audio source or device to rule out device-specific issues.
    • Verify the detachable cable is securely connected to both earphone units.
  • Distorted Sound:
    • Check for any debris or earwax in the earphone nozzle that might be obstructing the sound.
    • Ensure the cable is securely connected to both the earphones and the audio source.
    • Try a different audio source or device to determine if the issue is with the earphones or the source.
  • Microphone Not Working:
    • Ensure the microphone on the inline control is not obstructed.
    • Check your device's audio settings to confirm the correct microphone input is selected.
    • Test the microphone with another application or device.
  • Earphones Falling Out / Poor Fit:
    • Experiment with the different sizes of eartips provided to find the best fit for your ears. A proper seal is crucial for comfort and sound quality.
    • Ensure the earphones are inserted correctly into your ear canal, following the ergonomic design.

Specifications

Product information table showing model, impedance, sensitivity, frequency, plug type, pin type, cable type, and cable length.

Figure 6: Key product specifications.

FeatureSpecification
Product ModelCCA-CRA
Brand NameKZ (CCA)
StyleIn-ear
Vocalism PrincipleDynamic
CommunicationWired
Connectors3.5 MM
Plug TypeL Bending
Pin Type0.75mm (2-Pin detachable)
Cable TypeOxygen-free copper flat cable
Cable Length1.2m
Impedance34Ω
Sensitivity105dB
Frequency Response Range20 - 40Hz
Number Of Drivers2
Driver Diameter10mm
DiaphragmUltra-thin High Polymer Diaphragm (3.8μ thickness)
Headphone Pads MaterialSoft Foam
MaterialPlastic (housing)
With MicrophoneYes
Active Noise-CancellationYes
Volume ControlYes
Control ButtonYes
WaterproofNo
CertificationCE
OriginMainland China
Package ListDetachable Audio Cable
Package Length10 cm
Package Width5 cm
Package Height3 cm
Package Weight0.08 kg

User Tips

  • Optimal Fit: Experiment with the included eartip sizes to find the best seal for your ears. A good seal is crucial for maximizing bass response and achieving optimal sound isolation.
  • Cable Management: The detachable cable offers flexibility. When storing, coil the cable loosely to prevent kinks and extend its lifespan.
  • Sound Quality Enhancement: Some users report that allowing new earphones a 'burn-in' period (playing music for several hours) can help the drivers settle and potentially improve overall sound quality.
  • Upgrade Potential: The 0.75mm 2-pin connector allows for easy cable upgrades, including options for wireless connectivity or different audio characteristics, if desired.

Warranty and Support

For detailed warranty information, product support, or service inquiries, please refer to the official seller's store page on AliExpress or contact their customer service directly. It is recommended to retain your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.