JVC RM-SUXP5R RM-SFSP7J RM-SUXP7U

Contents

JVC Micro Compact Component Stereo System Remote Control User Manual

Models: RM-SUXP5R, RM-SFSP7J, RM-SUXP7U (Compatible with UX-P7, UX-P7J, UX-P7C, FS-P7, CA-FSP7 Systems)

Introduction

This manual provides instructions for the JVC replacement remote control, designed for use with various JVC Micro Compact Component Stereo Systems. Please read this manual carefully before using the remote control to ensure proper operation and longevity.

Front view of the JVC replacement remote control
Figure 1: Front view of the remote control.

Setup

Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery compartment cover downwards to open it.
  3. Back view of the remote control showing the battery compartment
    Figure 2: Back view of the remote control.
  4. Insert two (2) AA batteries into the compartment, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside.
  5. Battery compartment open with AA batteries inserted
    Figure 3: Battery compartment with batteries.
  6. Slide the battery compartment cover back into place until it clicks securely.

Note: Batteries are not included with the remote control.

Operating Instructions

This remote control is designed to replicate the functions of your original JVC stereo system remote. While the button layout may vary slightly from the original, the core functions are maintained.

Close-up of the remote control buttons and their labels
Figure 4: Detailed view of remote control buttons.

Basic Functions

  • STANDBY/ON (O/I): Powers the stereo system on or off.
  • Number Buttons (0-9, +10): Used for direct track selection, radio station presets, or inputting numerical values.
  • DISPLAY / CLOCK / SLEEP: Controls display modes, sets the clock, or activates the sleep timer.
  • BASS / A.B.S. / TREBLE: Adjusts audio equalization settings.
  • Navigation Buttons (Up, Down, Left, Right, ENTER): Used for menu navigation and selection.
  • PLAY (►) / PAUSE (▮▮) / STOP (■) / REWIND (◀◀) / FAST FORWARD (►►): Standard playback controls for CD, Tape, or other media.
  • CD / TAPE / TUNER / AUX/MD: Selects the input source.
  • FM MODE / RM MODE / AUTO REVERSE: Controls FM radio mode, remote mode, or tape auto-reverse function.
  • FROM / RANDOM / REPEAT: Playback options for media (e.g., CD).
  • PTY / RDS / INFO: Radio data system functions.
  • A.H.B. PRO: Activates or deactivates the Active Hyper-Bass PRO feature.
  • VOLUME (+/-): Adjusts the master volume level.

Point the remote control directly at the infrared sensor on your JVC stereo system. Ensure there are no obstructions between the remote and the system.

Maintenance

Cleaning

To clean the remote control, wipe it with a soft, dry cloth. Do not use liquid cleaners, alcohol, or abrasive materials, as these can damage the surface or internal components.

Battery Replacement

Replace the batteries when the remote control's range decreases or it stops responding. Always replace both batteries at the same time with new AA batteries. Do not mix old and new batteries, or different types of batteries.

Storage

If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage.

Troubleshooting

  • Remote not responding:
    • Check if the batteries are inserted correctly with the correct polarity.
    • Replace the batteries with fresh AA batteries.
    • Ensure there is a clear line of sight between the remote control and the stereo system's infrared sensor.
    • Verify that the stereo system is powered on.
  • Specific functions not working:
    • Confirm that your stereo system model is listed as compatible. While this remote is a replacement, slight variations in system models might lead to some buttons having different or no functionality.
    • If you suspect a compatibility issue, compare the button layout of this remote with your original remote or your stereo system's manual.

Specifications

FeatureDetail
BrandJVC
Remote Control Model NumbersRM-SUXP5R, RM-SFSP7J, RM-SUXP7U
Compatible System ModelsUX-P7, UX-P7J, UX-P7C, FS-P7, CA-FSP7
ConditionUsed-90% NEW
Wireless CommunicationIR (Infrared)
Frequency433 MHz
Channel1
UseUniversal
Battery Type2 x AA (not included)
PackageYes
OriginMainland China
CertificationNONE

User Tips

  • Compatibility Check: Before purchasing or if you encounter issues, it is highly recommended to compare the button layout of this remote with your original remote or the manual for your specific JVC stereo system model. If you are unsure, provide a photo and the exact model number of your device (or old remote) to the seller for confirmation. This is especially important as some JVC models like RM-SED752TRU might have different requirements.
  • Button Layout: Be aware that the physical location of buttons on this replacement remote may not be identical to your original remote, but the functionality is guaranteed to work for compatible models.
  • Battery Life: For optimal performance, use high-quality alkaline AA batteries.

Warranty and Support

This product comes with a 3-month warranty from the date of purchase.

For any questions regarding compatibility or functionality, please contact the seller directly. Provide your device's model number and, if possible, a photo of your original remote or stereo system for accurate assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.