SMC02 ZK-SMC02

Contents

SMC02 Stepper Motor Driver and Controller User Manual

Model: ZK-SMC02

1. Introduction

The SMC02 is a specialized operation control module designed for single-axis stepping motors. It integrates both controller and driver functionalities, offering a variety of fixed operation modes. Users can quickly select the appropriate motion track, and parameters such as distance, speed, delay, and number of cycles can be saved and retained after power down. This module can operate independently or be integrated into larger systems. It is suitable for general industrial control applications but is not intended for medical, life-saving, life support, or other critical fields, nor for use in hazardous environments like coal mines or oil depots.

Disclaimer:

For electronic module products, users should possess a certain electronic foundation and carefully read the product description before use. This product is not designed for medical, life-saving, life support, or other purposes, and cannot be used in dangerous places such as coal mine and oil depot. We do not guarantee such responsibilities; the product profit is low, the user's operation ability and use occasions vary greatly, and any electronic equipment cannot be foolproof. The equipment owner shall make corresponding protective measures and risk management plan. The company shall not be liable for compensation for any personal or property loss directly or indirectly caused by the equipment.

2. Product Overview

The ZK-SMC02 is an integrated stepper motor controller and driver, featuring a physical button interface, LCD display, and support for both automatic and manual operation, as well as TTL serial communication.

2.1 Key Features

  • Adjustable Delay
  • Speed Regulation
  • Angle Adjustment
  • Adjusting Distance
  • Physical button control
  • LCD display for real-time information
  • Auto/Manual operation modes
  • TTL serial communication for programmable control
  • Integrated stepper motor driver

2.2 Components and Interface

Front view of SMC02 Stepper Motor Controller with key features highlighted
Figure 2.1: Front view of the SMC02 Stepper Motor Controller, highlighting CW/CCW buttons, LCD, encoder knob, and RUN/STOP button.
SMC02 Product Function Diagram
Figure 2.2: Product function diagram showing indicators for forward/reverse rotation, encoder setting knob, and run/pause button.
SMC02 Interface Functions
Figure 2.3: RUN INTERFACE displaying running information (e.g., OUT, RPM) and MENU SETTING INTERFACE for parameter modification.

3. Specifications

ParameterValue
ModelZK-SMC02 stepper motor controller + driver
Adaptive MotorStepping motor
Number of Control AxesSingle axis
Motor SignalCommon cathode
Power Supply RangeDC 5-30V
Driving Capacity4A
Instruction FeaturesStreamline and optimize multiple common instructions
Acceleration and Deceleration ControlYes
Input Reverse Connection ProtectionYes
Remote Communication ControlTTL serial port
Main FunctionsAutomatic, manual, setting, and serial port control
Speed Range0.1 ~ 999 laps / min
Number of Forward Rotation Pulses1-9999 pulses
Number of Reverse Pulses1-9999 pulses
Number of Cycles1-9999
Forward Rotation Delay Time0.0-999.9 seconds
Reverse Delay Time0.0-999.9 seconds
Subdivision Selection Range1-32 subdivision
Product Service Environment-5 °C - 60 °C (no condensation)
Dimensions (L x W x H)79mm x 43mm x 41mm
Net Weight64g
SMC02 Product Dimensions and Weight
Figure 3.1: Physical dimensions and weight of the SMC02 module.

4. Setup

4.1 Wiring Diagram

Ensure all connections are secure and correct before applying power. Refer to the diagram below for proper wiring of the stepper motor, power supply, and control signals.

SMC02 Product Wiring Diagram
Figure 4.1: Detailed wiring diagram for connecting the SMC02 to a stepper motor and power supply. A+, A-, B+, B- terminals connect to the motor coils. Power supply + and - connect to the DC 5-30V input.
SMC02 Internal Connections and DIP Switches
Figure 4.2: Internal view showing subdivision settings DIP switches (1, 2, 3), current regulating potentiometer (0-4A), optocoupler isolation, and control signal terminals (Public line, Stop signal, Reverse signal, Forward rotation signal, Reserved signal).

4.2 Subdivision Settings

The subdivision settings are configured using the DIP switches (S1, S2, S3) on the module. Adjust these switches according to the desired subdivision for your stepper motor. The current regulating potentiometer allows adjustment of the motor current from 0-4A.

SMC02 Subdivision Settings Table
Figure 4.3: Table detailing the DIP switch configurations for various subdivision settings (1, 2/A, 2/B, 4, 8, 15, 16, 32).

For serial communication, connect to the +3.3V, TX, RX, and GND pins as shown in Figure 4.2. The GND, EN, DIR, and PUL terminals are for connecting to the driver's negative common terminal, enable terminal, direction end, and pulse direction respectively.

5. Operating Instructions

The SMC02 offers intuitive control through its rotary encoder and buttons, along with a menu-driven LCD interface.

5.1 Basic Operation Flow

SMC02 Operating Instructions Flowchart
Figure 5.1: Step-by-step guide for operating the SMC02, including run/stop, menu entry, parameter adjustment, and exit.
  1. Run Stop Exit: In the running interface, rotate the encoder to adjust speed. Press the CW button for forward rotation, CCW button for reverse rotation. Press the RUN/STOP button to stop operation. Long press the encoder to enter the menu settings.
  2. Menu Setting Interface: In the menu setting interface, adjust the rotary encoder to change parameter codes F-01 to F-13. Long press the encoder to save the parameters and exit, returning to the running interface.
  3. Parameter Tuning: In the menu setting interface, short press the encoder to enter the F-XX corresponding menu parameter setting state. The parameter flashes. Short press again to shift, rotate the encoder to adjust the parameters. Short press the RUN/STOP button to exit the parameter setting and return to the main menu number adjustment interface.

5.2 F Menu Setting Functions

The F menu allows detailed configuration of various operational parameters. Use the encoder to navigate and adjust values.

SMC02 F Menu Setting Functions Table
Figure 5.2: Table listing all F menu setting functions (F-01 to F-13), their adjustable ranges, and default values.
Serial NumberFunctionAdjustable RangeDefaults
F-01Action flow mode selection (details below the table)1-91
F-02Number of forward rotation pulses (Unit: number)1-99991600
F-03Forward rotation speed (Unit: Revolution / minute)0.1-99910
F-04Number of reverse pulses (Unit: Number)1-99991600
F-05Reversal speed (Unit: circle (revolution)/min)0.1-99910
F-06Cycle work times (among them = numerous times) (Unit: times)0-9999 or countless times1
F-07Forward rotation in place delay (Unit: second accuracy ± 0.2 second)0.0-999.90.0
F-08Reverse in place delay (Unit: second accuracy ± 0.2 second)0.0-999.90.0
F-09Number of pulses per revolution: 1-9999 (X10) Unit: 10 (for example, the step angle is 1.8 degrees, the stepping motor drives 8 segments, and one revolution is 360 / 1.8 * 8 = 1600, setting 160, actual 1600)1-9999160
F-10Main interface display content (00- motor coil speed delay time, 01- motor coil speed cycle times)0-100
F-11Action when pressing pause key (0 - slow stop of motor deceleration, 1 - motor stops immediately (emergency stop has impact))0-10
F-12Acceleration and deceleration level (1-100, 1 slowest, 100 fastest)1-10020
F-13Postal address1-2551

5.3 P01 Action Process Mode Selection

The P01 parameter (F-01) defines the operational sequence of the motor. Select the mode that best suits your application.

SMC02 P01 Action Process Mode Selection Table
Figure 5.3: Table detailing the P01 action process modes (1-9) and their corresponding motor behaviors.
[P01]Description of Action Process
[P01]→1The motor works with [knob on controller].
[P01]→2It keeps rotating after pressing the button, and stops when it is released. [Press CW] Always rotate forward.
[P01]→3After pressing the button, keep rotating, and press again to stop. [Press CW] forward rotation [Press CCW] reverse rotation.
[P01]→4After pressing the button, it can rotate forward or reverse-delay according to the set distance, and it can cycle F-06 times. [Press CW] Forward rotation-Delay (F-07) [Press CCW] Reverse rotation-Delay (F-08).
[P01]→5After pressing the button, it can cycle according to the set distance forward or reverse delay (F-06). Return to zero at the end of the cycle. [Press CW] forward rotation delay (F-07), Cycle (F-06), return to zero [press CCW] reverse delay (F-08), Cycle (F-06), return to zero.
[P01]→6After pressing the button, cycle forward and reverse according to the set distance. Abbreviations: [press CW] forward delay (F-07) - reverse delay (F-08), [press CCW] reverse delay (F-08) - forward delay (F-07), above cycle (F-06).
[P01]→7After pressing the button, the motor will rotate forward or reverse permanently, release the button, - delay - return to zero. Abbreviations: [press CW] forward rotation - release - delay (F-07) - return to zero, [press CCW] reverse rotation - release - delay (F-08) - return to zero.
[P01]→8After pressing the button, forward or reverse - delay according to the set time. Recyclable (F-06). Abbreviations: [press CW] forward rotation time (F-07) - delay (F-08), [press CCW] reverse rotation time (F-08) - delay (F-07), the above cycle (F-06).
[P01]→9After power on, it will automatically cycle forward and reverse according to the set distance. Abbreviations: forward delay (F-07) - reverse delay (F-08), cycle (F-06).

6. Troubleshooting

This section provides general guidance for common issues. For more complex problems, consult the seller or a qualified technician.

  • Motor not moving: Check power supply connections, motor wiring (A+, A-, B+, B-), and ensure the correct operating mode (P01) is selected. Verify current settings and subdivision.
  • Erratic movement: Ensure stable power supply. Check for loose connections. Verify parameter settings (speed, pulses, delays) are appropriate for your motor and application.
  • Display issues: Ensure the module is receiving adequate power. If the display is blank or unreadable, power cycle the device.
  • Communication errors (TTL serial): Verify correct wiring of TX, RX, GND. Ensure baud rates and communication protocols match between the SMC02 and the communicating device.

7. User Tips

No specific user tips were available from reviews or Q&A for this product at the time of manual creation. However, general best practices for stepper motor controllers include:

  • Always double-check wiring before applying power to prevent damage.
  • Start with lower speed and acceleration settings during initial setup and gradually increase them.
  • Ensure proper heat dissipation for the module, especially when operating at higher currents or for extended periods.
  • Keep the operating environment within the specified temperature range (-5 °C to 60 °C) and avoid condensation.

8. Maintenance

The SMC02 module is designed for low maintenance. Follow these guidelines to ensure longevity:

  • Keep the module clean and free from dust and debris.
  • Avoid exposing the module to excessive moisture or corrosive environments.
  • Periodically check all wiring connections for tightness and signs of wear.
  • Do not attempt to open the module casing unless you are a qualified technician, as this may void any implied warranty and expose you to electrical hazards.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.