Avantree Medley 6018 Clear Dialogue Wireless Earbuds for TV Watching

Introduction

The Avantree Medley 6018 is a wireless audio solution designed to enhance your TV viewing experience. This system includes a pair of neckband in-ear headphones and a 2-in-1 Bluetooth transmitter with a charging dock. It offers clear dialogue, enhanced volume, and wide compatibility with various TV audio outputs, allowing you to listen to your TV at your preferred volume without disturbing others.

What's in the Box

• Transmitter / Charging Dock
• Neckband In-ear Headphone
• Ear tips (S, L)
• Type C Power Cable (1.5M/5FT)
• Optical Audio Cable (1.5M/5FT)
• AUX 3.5mm Audio Cable (1.5M/5FT)
• AUX 3.5mm to RCA Adapter (35CM/1FT)
• Quick Start Guide (QSG)

Product Overview

The Medley 6018 system consists of a transmitter base that also functions as a charging dock, and a pair of neckband-style wireless earbuds. The transmitter connects to your TV's audio output, broadcasting sound to the earbuds.

Transmitter Ports and Indicators

• OPT IN: Optical audio input port.
• AUX IN: 3.5mm audio input port.
• DC IN: USB Type-C power input port.
• OPT OUT: Optical audio pass-through output.
• AUX OUT: 3.5mm audio pass-through output.
• LOCK/OPT/AUX/MIC Switch: Selects the audio input source.
• Bypass to Speaker Switch: Enables or disables the pass-through function.

Earbud Controls

The neckband earbuds feature integrated controls for power, volume, and mode selection. These controls are typically located on the neckband for easy access.

Setup Instructions

1. Powering the Transmitter

1. Connect the provided Type C Power Cable to the DC IN port on the transmitter.
2. Plug the other end of the cable into a USB power adapter (not included) or a powered USB port.

2. Connecting to Your TV

The Medley 6018 supports Optical, AUX (3.5mm), and RCA audio inputs. Choose the connection method that is available on your TV.

• Optical Connection (Recommended for best quality):
  1. Connect one end of the Optical Audio Cable to your TV's Optical Audio Out port.
  2. Connect the other end to the OPT IN port on the Medley 6018 transmitter.
  3. Set the transmitter's input switch to OPT.
• AUX 3.5mm Connection:
  1. Connect one end of the AUX 3.5mm Audio Cable to your TV's 3.5mm Audio Out (headphone) port.
  2. Connect the other end to the AUX IN port on the Medley 6018 transmitter.
  3. Set the transmitter's input switch to AUX.
• RCA Connection (for older TVs):
  1. Connect the AUX 3.5mm to RCA Adapter to the AUX 3.5mm Audio Cable.
  2. Connect the RCA plugs (red and white) to your TV's Audio Out (L/R) ports.
  3. Connect the 3.5mm end of the cable to the AUX IN port on the Medley 6018 transmitter.
  4. Set the transmitter's input switch to AUX.

3. Initial Pairing (Hassle-Free Set Up)

The Avantree Medley 6018 earbuds and transmitter are factory pre-paired. Simply power on both devices after connecting the transmitter to your TV and power source. They should automatically connect within a few seconds. The LED indicators on both devices will confirm a successful connection.

4. Charging the Earbuds

The transmitter base doubles as a charging dock for the earbuds. When the earbud battery is low, simply place the earbuds onto the charging dock. They will begin charging automatically and should be fully recharged within 3 hours. The earbuds can also be charged directly using a 5V/2.5A USB-C cable.

Operating Instructions

1. Power On/Off

• Transmitter: Once connected to power, the transmitter is generally always on.
• Earbuds: Press and hold the multi-function button on the neckband until you hear a voice prompt or see the LED indicator light up/turn off.

2. Adjusting Volume

Use the volume control buttons on the earbud neckband to adjust the listening volume to your preference. The Medley 6018 is designed to provide a louder volume than typical TV headphones.

3. Clear Dialogue Mode

The Medley 6018 features a special 'Clear Dialogue' sound mode to significantly enhance the clarity of conversations and dialogues in your favorite TV shows and movies.

Switch between the default (balanced) mode and clear dialogue mode seamlessly using the controls on your earbuds.

4. Soundbar / Stereo AVR Pass-through

The 'Pass-through' feature allows the Medley 6018 to work simultaneously with your existing soundbar or stereo AV receiver. This means you can listen through the headphones at your own volume, while others can listen through the TV speakers or connected sound system.

To use this feature, connect your soundbar or AV receiver to the OPT OUT or AUX OUT port on the Medley 6018 transmitter, and ensure the 'Bypass to Speaker' switch is enabled.

5. Using Earbuds Independently

The Medley Bluetooth earphone can also be used independently with your mobile phone or PC. Simply pair it directly via Bluetooth to your device. Note that when used separately, there may be audio lag if the earbuds are not connected to the Medley 6018 transmitter.

6. Dual Link Feature (Two Headphones at the Same Time)

The transmitter base in Avantree 6018 allows you to add a second pair of headphones (Avantree compatible) so you can enjoy a nice movie streaming night with a partner. This dual link feature goes even further to permit independent volume adjustment on either headphone, allowing both users to enjoy content at their preferred volume level.

Maintenance

Cleaning

• Wipe the earbuds and transmitter with a soft, dry cloth.
• Do not use abrasive cleaners or solvents.
• Remove ear tips and clean them with mild soap and water if necessary, ensuring they are completely dry before reattaching.

Storage

• Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• When not in use for extended periods, ensure the earbuds are fully charged before storing.

Troubleshooting

No Sound from Earbuds

• Ensure the transmitter is powered on and correctly connected to your TV's audio output.
• Verify that the correct audio input source (Optical or AUX) is selected on the transmitter.
• Check if the earbuds are powered on and successfully connected to the transmitter (indicated by LED lights).
• Increase the volume on both the earbuds and your TV.
• Ensure your TV's audio output format is set to 'PCM' if using the Optical connection (check TV audio settings).

Audio Lag / Lip-Sync Delay

• The Medley 6018 features FastStream Bluetooth for minimal latency. Ensure both the transmitter and earbuds are using this codec.
• If using the earbuds independently with another device, some lag may occur as FastStream is optimized for the Medley 6018 transmitter.

Earbuds Not Charging

• Ensure the transmitter is properly powered.
• Make sure the earbuds are correctly seated in the charging dock.
• Check the charging cable and power adapter for any damage.

Specifications

Transmitter / Charging Dock

Neckband In-ear Headphone

User Tips

• For optimal sound quality, ensure your TV's audio output is set to 'PCM' when using the Optical connection.
• Experiment with the different sized ear tips (S, L) to find the most comfortable and secure fit for better sound isolation and bass response.
• Take advantage of the 'Clear Dialogue' mode for news, talk shows, or movies where speech clarity is paramount.
• If you experience any interference, try moving the transmitter away from other wireless devices.

Warranty & Support

Avantree products typically come with a manufacturer's warranty. For specific warranty details, technical support, or service inquiries, please refer to the official Avantree website or contact their customer support directly. Keep your purchase receipt as proof of purchase.