1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Dooya DC1650, DC1651, or DC1653 wall-mounted remote controller. These controllers are designed to seamlessly operate Dooya electric curtain motors with built-in 433MHz receivers, offering convenient control over your automated window treatments.
2. Models Overview
The Dooya wall sticker remote controllers are available in three models, each offering different channel capabilities:
- DC1650: Single channel remote controller.
- DC1651: Dual channel remote controller.
- DC1653: 15 channel remote controller.
All models operate on RF433MHz frequency and are compatible with Dooya built-in 433MHz curtain motors such as KT320, DT52E, DT360, KT82TN, and Sunflower motors with built-in 433MHz motors.
3. Specifications
| Feature | Specification |
|---|---|
| Brand | Dooya |
| Model Numbers | DC1650, DC1651, DC1653 |
| Transmit Frequency | 433MHz |
| Voltage | 3V |
| Controllable Range | 60M (without wall obstructions) |
| Dimensions (W x H) | 86mm x 86mm |
| Weight (approx.) | DC1650: 74.6g, DC1651: 78.8g, DC1653: 86.2g |
| Channels | DC1650: 1 Channel, DC1651: 2 Channels, DC1653: 15 Channels |
| Battery | Not included (requires 3V battery, type not specified but typically CR2032 or similar for wall remotes) |
| Compatibility | Dooya built-in 433MHz curtain motors (e.g., KT320, DT52E, DT360, KT82TN) and Sunflower motors with built-in 433MHz motors. |
4. Setup Instructions
4.1. Battery Installation
- Carefully remove the battery cover on the back of the remote controller.
- Insert the required 3V battery (not included), ensuring correct polarity (+/-).
- Remove any insulation paper if present, which prevents battery drain during storage.
- Replace the battery cover securely.
4.2. Mounting the Remote Controller
The remote controller is designed as a wall sticker, allowing for flexible placement.
- Choose a suitable, clean, and dry surface for mounting.
- Peel off the protective backing from the adhesive on the back of the remote's base.
- Press the remote firmly onto the desired wall location.
4.3. Pairing with Curtain Motor
Refer to your specific Dooya electric curtain motor's manual for detailed pairing instructions. Generally, the process involves:
- Putting the curtain motor into pairing mode (often by pressing a button on the motor or cycling power).
- Pressing a specific button sequence on the remote controller (e.g., a hidden pairing button or a combination of control buttons) within a short timeframe.
- Confirming successful pairing (the motor may beep or jog slightly).
Note: These remote controllers are compatible with Dooya motors that have a built-in 433MHz receiver. They do not require separate modules for connection if your motor is already compatible.
5. Operating Instructions
The remote controllers feature intuitive buttons for controlling your electric curtains:
- Up Arrow (Open): Press to open the curtains.
- Dash/Line (Stop): Press to stop the curtains at any desired position.
- Down Arrow (Closed): Press to close the curtains.
For DC1651 (dual channel) and DC1653 (15 channel) models, you will also have channel selection buttons (e.g., '+' and '-' or a channel display) to switch between different motors or groups of motors before issuing a command.
6. Maintenance
- Keep the remote controller clean by wiping it with a soft, dry cloth.
- Avoid exposing the remote to excessive moisture, direct sunlight, or extreme temperatures.
- If the remote's range decreases or buttons become unresponsive, replace the battery.
- Do not attempt to disassemble or repair the remote controller yourself, as this may void the warranty.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Curtain motor does not respond to remote. | Low battery; Remote not paired; Motor out of range; Obstruction; Motor power off. | Replace battery; Re-pair remote with motor; Move closer to motor; Remove obstructions; Check motor power supply. |
| Remote range is reduced. | Low battery; Interference; Obstructions (e.g., thick walls). | Replace battery; Minimize interference from other RF devices; Ensure clear line of sight if possible. |
| Buttons are unresponsive or sticky. | Dirt or debris under buttons; Internal malfunction. | Clean the remote surface; If problem persists, contact support. |
8. User Tips
- Compatibility Check: Always ensure your Dooya curtain motor has a built-in 433MHz receiver for compatibility with these remote controllers. These remotes are designed to work directly with compatible motors and do not require additional external modules for basic operation.
- Battery Type: While the battery is not included, these remotes typically use a standard 3V coin cell battery (e.g., CR2032). Check the battery compartment for the exact type if not specified.
- Optimal Placement: For best performance, mount the wall sticker remote in a central location within the controllable range of your curtain motor, avoiding major metal obstructions.
9. Warranty and Support
This product comes with a 1-year manufacturer's limited warranty for defective items from the date of receipt. Accessories typically have a 3-month warranty. The warranty does not cover items damaged due to misuse or unauthorized repairs.
If you encounter any issues or require technical assistance, please contact your retailer or the manufacturer's customer support with your order details and a description of the problem.
