TYT MD-2017/MD-398 Programming Cable

Contents

USB Programming Cable User Manual

Model: TYT MD-2017/MD-398 Programming Cable

Introduction

This manual provides instructions for the proper installation, operation, and maintenance of your TYT MD-2017/MD-398 USB Programming Cable. This cable is designed to connect your compatible TYT DMR radio to a personal computer for programming settings and frequencies.

TYT MD-2017/MD-398 USB Programming Cable
Overview of the TYT MD-2017/MD-398 USB Programming Cable.

Setup and Installation

System Requirements

  • Operating System: Windows XP/Win7/Win8/Win10
  • Compatible Radios: TYT MD-2017, TYT MD-398, RT82, RT83, RT87, V-2017 DMR Radios (IP67 Waterproof Series)
  • Programming Software: Specific software for your radio model (not included, typically provided by the radio manufacturer or seller upon request).

Driver Installation

Before connecting the cable, it is recommended to install the necessary USB driver. The cable typically uses a Prolific USB-to-serial chip. If the driver does not install automatically, you may need to manually install the "Prolific USB-to-serial comm port" driver. Ensure you have the correct driver version for your operating system.

Connecting the Cable

  1. Connect the USB end of the programming cable directly to an available USB port on your PC or laptop.
  2. Align the radio connector end of the cable correctly with the programming port on your TYT radio.
  3. Insert the connector until it is securely in place.
  4. Important Note: Do not press the PTT (Push-To-Talk) button on the radio to transmit before connecting the antenna to the radio. When installing the antenna, do not hold the top of the antenna while rotating it to attach it.
USB connector of the programming cable
Close-up of the USB connector with TYT branding.
Radio connector of the programming cable
Close-up of the radio connector with screw for secure attachment.

Operating Instructions

  1. Ensure the programming cable is securely connected to both your PC and the radio.
  2. Launch the appropriate programming software for your TYT radio on your computer.
  3. Within the software, select the correct COM port that your programming cable is assigned to (this can usually be found in your computer's Device Manager).
  4. Follow the software's instructions to read the current settings from your radio, modify frequencies and other parameters, and then write the new settings back to the radio.
  5. After programming, safely disconnect the cable from both the PC and the radio.

Testing Functionality

After connecting the cable and before attempting to program, you can perform a basic test to ensure the accessory is functioning properly. This usually involves the programming software detecting the connected radio.

Maintenance

  • Keep the cable clean and dry.
  • Avoid bending or kinking the cable sharply, as this can damage internal wires.
  • Store the cable in a cool, dry place away from direct sunlight and extreme temperatures.
  • Regularly check connectors for any signs of damage or corrosion.

Troubleshooting

Cable Not Recognized by PC

  • Driver Issue: If the cable is not recognized (e.g., "Prolific USB-to-serial comm port (COM3)" not appearing or showing an error), the driver may be incorrect or corrupted. Try reinstalling the driver. Ensure you download the correct driver for your operating system (Windows XP/7/8/10).
  • USB Port: Try connecting the cable to a different USB port on your computer.
  • Cable Damage: Inspect the cable for any visible signs of damage.
  • Software Compatibility: Ensure your programming software is compatible with your operating system and radio model.

Programming Errors

  • Secure Connection: Verify that the cable is securely connected to both the PC and the radio.
  • Correct COM Port: Double-check that the correct COM port is selected in the programming software.
  • Radio Power: Ensure the radio is powered on and has sufficient battery charge.
  • Software Version: Use the latest version of the programming software for your radio model.

Specifications

FeatureSpecification
Brand NameTYT
Model NumberMD-2017/MD-398 Programming Cable
MaterialCable
Dimensions83CM / 32.68IN
WeightAbout 30G / 1.06oz
PC ConnectorUSB3.0
CompatibilityWindows XP/Win7/Win8/Win10
Radio TypeDMR
CertificationCE, Dot, EAC, EPA, FCC, GMP, RoHS, TGA, UL, KC, pse, weee

Warnings & Safety Information

⚠ WARNING: CHOKING HAZARD - Small parts. Not for Children under 3 years.

⚠ WARNING: Do not use this product in flammable, explosive, or high-static environments to prevent fire or explosion hazards.

⚠ WARNING: Ensure the device is dry before use. Do not charge or use the device when it is wet or has been exposed to water, to prevent electric shock or device damage.

Usage Restrictions

  • Do not use this product in damp, high-temperature, flammable, or explosive environments.
  • Do not disassemble, modify, or repair this accessory yourself.
  • This product is only compatible with specified models; do not use it with other devices.

Safety Information

  • Keep away from flammable materials.
  • Do not expose the accessories to extreme temperatures (below -10°C or above 40°C).

Compliance Information

This product complies with the following EU regulations and harmonized standards:

  • 2014/53/EU
  • 2011/65/EU
  • EN 62368-1:2020
  • EN 301 489-1 V2.2.3
  • EN 300 328 V2.2.2
CE, UKCA, FCC, RoHS, and recycling symbols
Compliance markings and recycling symbols.

Disposal

When disposing of the product, please follow local electronic waste recycling regulations.

User Tips

  • Driver Troubleshooting: If your cable is not recognized by Windows 7 or Windows 10, and you've installed the Prolific USB-to-serial driver, ensure you have the latest version. Sometimes, older Prolific drivers can cause conflicts. Check the Device Manager for any yellow exclamation marks next to the COM port, which indicates a driver issue.
  • Programming Software: Remember that the programming cable is an interface. You will need specific programming software (CPS) for your radio model (e.g., TYT MD-2017 or MD-398) to configure the radio. This software is typically available from the radio manufacturer's website or can be requested from the seller.

Warranty and Support

This product comes with a warranty as per seller terms. For technical support or inquiries regarding programming software, please contact the seller or the manufacturer (TYT).

A detailed user manual in PDF format is available for download: View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.