1. Introduction
This manual provides instructions for the setup, operation, maintenance, and troubleshooting of your new hononjo Universal Remote Control. This remote is designed as a replacement controller for various JBL Sound Bar Systems, including models 9.1, 3.1, 2.1, 2.0, 5.1 Surround Sound Bar, and JBL2GBAR51IMBLKAM.
Figure 1: Front view of the Universal Remote Control
2. Setup
2.1 Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards or press the latch and lift to open.
- Insert two (2) AAA alkaline batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
- Replace the battery cover by sliding it back into place until it clicks securely.
Figure 2: Battery Compartment
2.2 Initial Use
This remote control is a direct replacement and typically requires no programming. Once batteries are installed, point the remote at your JBL sound bar system and begin operation.
3. Operating Instructions
The remote control features a standard layout for easy navigation of your JBL sound bar system. Refer to Figure 1 for button placement.
3.1 Basic Functions
- Power Button (⏻): Turns the sound bar system on or off.
- Source Button: Cycles through available input sources (e.g., HDMI, Bluetooth, Optical).
- Volume Up/Down (VOL +/-): Adjusts the main volume level.
- Mute Button (🔇): Mutes or unmutes the sound.
- Play/Pause (▶/‖): Plays or pauses media playback.
- Skip Forward/Backward (⏮/⏭): Skips to the previous or next track/chapter.
3.2 Advanced Functions
- Atmos: Activates or deactivates Dolby Atmos sound mode (if supported by your sound bar).
- HDMI: Selects HDMI input.
- Wireless Surround (+/-): Adjusts the volume of wireless surround speakers.
- Bass (+/-): Adjusts the bass level.
- Surround (⟳): Toggles surround sound modes.
- Sound Mode (🎵): Cycles through preset sound modes.
- BT (Bluetooth): Selects Bluetooth input for pairing or connecting devices.
- Soundshift: Enables or disables Soundshift feature (seamless switching between TV and Bluetooth audio).
- Shuffle (🔀): Toggles shuffle playback mode.
- Audio Sync: Adjusts audio delay to synchronize with video.
- Calibration: Initiates sound calibration (refer to your sound bar's manual for specific instructions).
- Night Mode (🌙): Reduces dynamic range for quieter listening.
- Dim Display (☀): Adjusts the brightness of the sound bar's display.
4. Maintenance
4.1 Cleaning
To clean the remote control, use a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these may damage the surface or internal components.
4.2 Battery Replacement
Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time. Refer to Section 2.1 for battery installation instructions.
4.3 Storage
If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the device.
5. Troubleshooting
5.1 Remote Not Responding
- Check Batteries: Ensure batteries are inserted correctly with the correct polarity (+/-). Replace with fresh AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries.
- Line of Sight: Ensure there is a clear line of sight between the remote control and the sound bar system. Obstructions can block the infrared signal.
- Distance: Make sure you are within the effective range of the remote control.
- Sound Bar Power: Verify that the sound bar system is powered on and not in standby mode.
5.2 Specific Functions Not Working
If certain buttons or functions do not work, ensure your JBL sound bar model supports that specific feature. While this is a universal replacement, some advanced functions may vary by sound bar model.
6. Specifications
| Feature | Specification |
|---|---|
| Item Type | Remote Control |
| Brand Name | hononjo |
| Compatible Models | JBL 9.1, 3.1, 2.1, 2.0, 5.1 Surround Sound Bar Systems, JBL2GBAR51IMBLKAM |
| Material | ABS |
| Color | Black |
| Power Supply | 2 x AAA batteries (not included) |
| Wireless Communication | IR (Infrared) |
| Frequency | 433 MHz |
| Channel | 1 |
| Support APP | No |
| Package Weight | 0.12 kg |
| Package Dimensions | 18cm x 10cm x 3cm |
7. User Tips
- Verify Compatibility: Before use, confirm that this remote control is the correct model for your specific JBL sound bar unit to ensure full functionality.
- Battery Best Practices: Always use fresh, high-quality alkaline batteries. Avoid mixing battery brands or types to ensure optimal performance and prevent damage.
- Comfort and Responsiveness: The remote is designed for a comfortable grip and sensitive key response, enhancing your control experience.
8. Warranty and Support
Specific warranty information for this replacement remote control is not provided in the product details. For any issues or support inquiries, please contact the seller, "Remote control of the world," directly through your purchase platform.
