1. Introduction
The PHYEE 16P2ISO ISO Wiring Harness Adapter is designed to simplify the installation of aftermarket 2 Din Car Android Radio Head Units. This adapter provides a plug-and-play solution, connecting your new head unit to your vehicle's existing wiring system via a standard ISO connector. It ensures a secure and reliable electrical connection without the need for complex wire cutting or splicing.
2. Setup and Installation
This adapter is designed for straightforward installation. Please ensure your car's model and model year match the harness adapter's compatibility requirements for proper function.
2.1 Components Overview

The adapter consists of:
- 16-Pin Male Plug: Connects to the 16-pin socket on your aftermarket Android head unit.
- ISO Female Connector: Connects to your car's existing ISO wiring harness.
- Labeled Wires: Individual wires for various functions, clearly labeled for easy identification.
2.2 Connecting to the Head Unit
Locate the 16-pin socket on the back of your 2 Din Car Android Radio Head Unit. The 16-pin male plug of the adapter is designed to fit directly into this socket.

2.3 Connecting to the Vehicle's Wiring
Connect the ISO female connector of the adapter to the ISO plug in your vehicle's wiring harness. This connection is typically plug-and-play.

2.4 Wiring Diagram and Pinout
The adapter includes labeled wires for specific functions. Refer to the detailed wiring diagram below for proper connection, especially for functions like steering wheel control or camera control that might require individual connections.

Wiring Details:
| Wire Color | Function | Pin Number |
|---|---|---|
| White | Front Speaker Left (+) | L |
| White/Black Striped | Front Speaker Left (-) | L |
| Gray | Front Speaker Right (+) | R |
| Gray/Black Striped | Front Speaker Right (-) | R |
| Green | Rear Speaker Left (+) | L |
| Green/Black Striped | Rear Speaker Left (-) | L |
| Purple | Rear Speaker Right (+) | R |
| Purple/Black Striped | Rear Speaker Right (-) | R |
| Black | Ground Wire / B- | 1 |
| Yellow | Constant Power Supply +12V | 2 |
| Red | Ignition Switch (ACC) | 3 |
| Orange | Illuminate Backlight (ILLUMINATION) | 4 |
| Pink | Reversing Camera Control Line (REVERSE) | 5 |
| Brown/White | Steering Wheel Control 2 (KEY2) | 6 |
| Brown | Steering Wheel Control 1 (KEY1) | 7 |
| Blue | Auto Antenna Power (ANT) | 8 |
3. Operation
Once correctly installed, the ISO Wiring Harness Adapter facilitates the electrical connection between your car's wiring and the Android head unit. The head unit will receive power, ground, and speaker signals, allowing it to function as intended. Specific operations of the head unit itself are covered in its respective user manual.
4. Maintenance
The ISO Wiring Harness Adapter is a passive component and requires minimal maintenance. Ensure all connections remain secure and free from moisture or physical damage. Periodically check for any signs of wear or corrosion on the connectors and wires. If any damage is observed, replace the adapter to prevent electrical issues.
5. Troubleshooting
5.1 Head Unit Loses Settings After Installation
Issue: The car Android head unit loses some setting information (e.g., radio presets, clock) after installation or when the car is turned off.
Possible Cause: Some ISO connectors may have the functions of pin A4 (Ignition Switch/ACC) and pin A7 (Constant Power Supply +12V) exchanged. This means the head unit is not receiving constant power to retain memory.
Solution: Consult the wiring diagram of your specific head unit and vehicle. You may need to swap the A4 (Red) and A7 (Yellow) wires on the adapter or the vehicle's harness to ensure constant power is supplied to the head unit's memory circuit.
5.2 Steering Wheel Controls Not Functioning
Issue: Steering wheel control buttons do not work after installing the head unit with the adapter.
Possible Cause: The steering wheel control wires (KEY1 and KEY2) on the adapter are not part of the standard ISO connector. They need to be connected separately.
Solution: Identify the steering wheel control wires from your vehicle's wiring harness. Connect these wires to the corresponding KEY1 (Brown) and KEY2 (Brown/White) wires on the adapter. Refer to your vehicle's service manual for the correct steering wheel control wire identification.
5.3 No Power to Head Unit
Issue: The head unit does not power on after installation.
Possible Cause: Incorrect power connections (ACC or Battery), blown fuse, or faulty ground connection.
Solution: Verify that the Yellow (Constant Power +12V) and Red (Ignition Switch/ACC) wires are correctly connected and receiving power. Check the fuse for the car radio circuit in your vehicle's fuse box. Ensure the Black (Ground) wire has a solid connection to the vehicle's chassis.
6. Specifications
| Feature | Description |
|---|---|
| Model Name | 16P2ISO |
| Item Type | Cables, Adapters & Sockets |
| Voltage | 12 V |
| Material | Copper |
| Item Weight | 0.08kg |
| Item Size | ISO Wiring Harness Adapter |
| Origin | Mainland China |
| Compatibility | Suitable for car models with ISO connector and aftermarket Android head units with 16-pin socket. |
7. User Tips
- Verify Compatibility: Always double-check that your car's model and year are compatible with the adapter to avoid issues.
- Check Pin Functions: If you experience power loss or memory issues, verify the A4 (ACC) and A7 (Battery) pin functions as they can sometimes be swapped in different vehicle models.
- Steering Wheel Controls: Remember that KEY1 and KEY2 wires for steering wheel controls are separate and need to be manually connected to your car's corresponding wires.
- Professional Installation: If you are unsure about any wiring connections, it is recommended to seek professional installation to prevent damage to your vehicle or head unit.
8. Warranty and Support
This PHYEE product comes with a 1-year warranty. For technical support or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.