Introduction
The COOSPO BC26 is a wireless GPS bike computer designed to track your cycling data with precision. Featuring dual GPS positioning, Bluetooth 5.0 connectivity, and app synchronization, it provides comprehensive data for your rides. This manual will guide you through the installation, operation, and maintenance of your BC26 bike computer.
Video: COOSPO BC26 GPS Bike Computer Product Overview
Setup
Package Contents
Before you begin, please ensure all items are present in your package:
- COOSPO BC26 GPS Bike Computer x 1
- GPS Bike Computer Mount x 1
- Micro USB Cable x 1
- Rubber pad for standard bike mount x 1
- Big size rubber ring x 2
- User Manual (PDF available online)

Image: Contents of the COOSPO BC26 package.
Installation
Follow these steps to install the BC26 on your bike:
- Place the rubber pad on your bike's handlebar or stem.
- Position the standard bike mount on top of the rubber pad.
- Secure the mount using the provided big size rubber rings, wrapping them around the handlebar/stem and the mount.
- Align the BC26 bike computer with the mount.
- Insert the BC26 into the mount.
- Rotate the BC26 clockwise until it locks securely into place.

Image: COOSPO BC26 installed on a bicycle handlebar.
Charging
Please charge the device before first-time use.
- Open the rubber cover on the device.
- Connect the device with the Micro USB cable to a USB DC 5V power adapter or computer.
- During charging, the battery icon on the display will flash until fully charged.
Important: The product has a built-in battery. Do not throw the product into a fire. Please choose an adapter that meets the rated voltage of the device to charge it, to avoid damage.

Image: COOSPO BC26 charging via Micro USB.
Acquiring Satellite Signals
The BC26 uses GPS for speed tracking. Ensure the device is outdoors and has a clear view of the sky. It may take 15-90 seconds to locate satellite signals. Remain stationary during this process for best results.

Image: BC26 displaying GPS and BEIDOU satellite positioning.
Time Zone Setting
- Long press the Left Down button (gear icon) to enter the setting mode (P1~P3). P1 is for time zone setting, and the currently set numerical value will flicker.
- Short press the Up Left button (up arrow) or Left Down button (down arrow) to switch the numerical value.
- Short press the Right button (play/pause icon) to confirm the current setting and enter the next digit or the next setting (P2 metric/imperial setting).
- The device will automatically save and exit after 15 seconds of no operation or a long press of the Left Down button (gear icon) to exit the setting.
Setting Metric and Imperial Units
- Long press the Left Down button (gear icon) to enter setting mode (P1~P3), then short press the Right button (play/pause icon) to enter P2 metric/imperial setting.
- Short press the Up Left button (up arrow) or Left Down button (down arrow) to switch between metric (KMH) and imperial (MPH). Default is KMH.
- Short press the Right button (play/pause icon) to confirm the current setting and enter the next setting (P3 speed alert setting).
Maximum Speed Alert Setting
- Long press the Left Down button (gear icon) to enter the setting mode (P1~P3), then short press the Right button (play/pause icon) to enter the P3 maximum speed alert setting. The currently set numerical value will flicker.
- Short press the Up Left button (up arrow) or Left Down button (down arrow) to switch the numerical value.
- Short press the Right button (play/pause icon) to confirm the current setting and enter the next digit or the next setting.
- Short press the Up Left button (up arrow) or Left Down button (down arrow) to set the prompt tone on/off. After the setting is completed, long press the Left Down button (gear icon) to exit, or it will automatically save and exit after 15 seconds of no operation.

Image: BC26 Speed Alert feature.
Operation
Button Functions
- Up Left Button (Up Arrow): Short Press to switch data type or numerical value.
- Left Down Button (Down Arrow / Gear Icon): Short Press to switch data type or numerical value. Long Press to enter/exit setting mode.
- Right Button (Play/Pause Icon / Power Icon): Short Press to power on, start riding, or switch settings. Long Press to power off or end the ride.
Status Icons
The BC26 display shows various icons to indicate device status and riding data:
- 88:88: Time
- No satellite signal icon: No satellite signal detected.
- Satellite signal level icon: Indicates satellite signal strength.
- Battery level icon: Shows current battery charge.
- Riding icon: Indicates active riding.
- Manual pause/Auto pause icon: Shows if riding is paused manually or automatically.
- AVG: Average speed.
- MAX: Maximum speed.
- Bluetooth connected icon: Bluetooth is connected.
- Alert sound on/off icon: Indicates if alert sound is enabled or disabled.
- MPH: Miles per hour.
- KMH: Kilometers per hour.
- TIME: Riding time.
- DST: Distance.
- ALT: Altitude.
- ODO: Odometer (Total distance).
- TOT: Total riding time.
- UTC: Time zone.
- h: Hour.
- Ft/Km/m/mi: Unit (Feet/Kilometers/Meters/Miles).
Cycling
To start and manage your ride:
- Turn on the device.
- Short press the Right button (play/pause icon) to start riding.
- Short press the Right button (play/pause icon) again to pause or resume your ride.
- Long press the Right button (play/pause icon) to end the ride.
Auto Pause: If your speed is 0 or too low, or there is no data during riding, the bike computer will automatically pause. If there is no speed data for 15 minutes, the computer will enter dormant mode. Press the Right button (play/pause icon) to return to the previous riding state.
Riding Data Display
The BC26 offers multiple data displays:
- Short press the Up Left button (up arrow) to cycle through real-time speed, maximum speed, and average speed.
- Short press the Left Down button (down arrow) to cycle through time, distance, altitude, and a combined time & distance display mode. The combined mode automatically switches data every 3 seconds.
Bluetooth Connection and App Sync
The BC26 can connect to the CoospoRide App for fast settings and data synchronization.
- Download the CoospoRide App from Google Play or the App Store.
- Power on your BC26 bike computer.
- Open the CoospoRide App, navigate to Me > Devices > Add Devices > Bike Computer.
- Select the BC26 bike computer to bind the device. Ensure your phone's Bluetooth is on and necessary permissions are granted.
- In the Home page of the App, click on the connected device (top-left corner) to enter the BC26 page, then click "Data Sync" to access the record synchronization page.
- Select the record(s) to be synchronized and click the sync icon to upload.
Sync to Strava: After connecting your Strava account (Me > More > Connect Third-Party Apps) within the CoospoRide App, data from the bike computer can be synced to Strava simultaneously. Note: You cannot export .fit files directly from BC26 via USB.

Image: CoospoRide APP for settings and data sync.

Image: Syncing BC26 data to Strava via CoospoRide App.
Maintenance
General Care
- Clean the device regularly with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Store the device in a cool, dry place when not in use.
- Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
Water Resistance
The water-resistant level of the bicycle computer is IPX7. It can be used in the rain if you close the protective cover on the back tightly. It is recommended to take down the bicycle computer and put it into a waterproof bag if it rains heavily.

Image: BC26 demonstrating IPX7 waterproof capability.
Troubleshooting
- GPS Signal Issues: If the device struggles to acquire a GPS signal, ensure you are in an open outdoor area. Remain stationary for 3-5 minutes after powering on to allow it to connect to satellites. Dense forests or bad weather can affect signal strength.
- Data Sync Problems: If data is not syncing to Strava, verify that your CoospoRide App is connected to your Strava account (Me > More > Connect Third-Party Apps). Ensure Bluetooth is enabled on your phone and the app has necessary permissions.
- Display Not Turning On: Ensure the device is sufficiently charged. If the battery icon is flashing during charging, it indicates it's receiving power.
- Bluetooth Connectivity: If the device is not connecting to the app, ensure Bluetooth is active on your smartphone and the BC26 is powered on. Try restarting both devices.
- No Speed Data During Ride: If you lose GPS positioning during a ride, speed data (real-time, average, maximum) will display as "--.-". Other data will remain. Move to an area with better sky visibility.
Specifications
| Feature | Specification (BC26) |
|---|---|
| Display Size | 2.3'' FSTN |
| Display Color | Black and White |
| Weight | 54g |
| Automatic Backlight | Yes |
| Battery Life | 20 hours with GPS |
| Battery Type | Rechargeable lithium-ion |
| Charging Time | 2 hours |
| Power | 600mAh rechargeable lithium battery |
| Charging Interface Type | Mini USB |
| Positioning System | GPS+BDS |
| Navigation | No |
| Parameters Displayed | 15+ |
| Measurements | Distance, Speed, Time, Altitude |
| Storage | 8M (80 hours history) |
| File Transfer | Bluetooth (CoospoRide APP compatible) |
| Wireless Transmission | Bluetooth (only for APP) |
| Transmission Range | Bluetooth: 10m |
| Water Rating | IPX7 |
| Smartphone Compatibility | iPhone & Android |
| Language | English |
| Certification | CE, FCC, RoHS, WEEE |
| Model Number | BC26 |
User Tips
- For accurate tracking, ensure the device is outdoors with a clear view of the sky when starting your ride.
- The CoospoRide App is essential for customizing settings and syncing your ride data.
- While the device is IPX7 waterproof, it's best to avoid submerging it or exposing it to heavy rain for extended periods.
- If you experience issues with Strava sync, double-check the connection within the CoospoRide app's settings.
- The auto-backlight feature is useful for night rides, ensuring visibility of your data.
Warranty and Support
For any product issues or support, please contact COOSPO directly:
- Manufacturer: Shenzhen Coospo Tech Co., Ltd
- Address: 6F, Building A, Dingxin Science Park, Xinan Street, Baoan District, Shenzhen
- Contact: +86 (755) 23594795
- Email: support@coospo.com
- Website: www.coospo.com
An electronic version of this manual, supporting multiple languages (English, Spanish, German, French, Italian, Turkish, Japanese), can be downloaded from: https://www.coospo.com/download-center-bc107/

Image: QR code for user manual download.
Safety and Compliance
Responsibility Disclaimer
The information contained in this manual is for reference only. The product described may be subject to alteration due to the manufacturer's continuing research and development plans, without prior announcement. We shall not bear any legal responsibility for any direct or indirect, accidental or special damages, losses, and expenses arising from or in connection with this manual or the contained product.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Waste Electrical Products
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.
- Do not open or modify the product.
- Do not disassemble or attempt to service this product.
- This product is safe under normal and reasonably foreseeable operating conditions.
- If the product is operating improperly, call COOSPO support.
- The product must be returned to the manufacturer for any service or repair.