1. Product Overview
The Tedeligo 433 Mhz Remote Control Switch is a versatile 2-channel RF relay receiver and transmitter system designed for controlling various electrical devices. It operates within a DC 6V to 30V range and can handle up to 10A current, making it suitable for a wide array of applications.
Figure 1: Tedeligo 433 Mhz RF Relay Receiver and Transmitter kit, showing the receiver board, protective case, and two remote controls. Batteries (CR2016) are included.
1.1 Product Application Area
This remote control system is ideal for use in various environments including homes, farms, factories, offices, laboratories, and supermarkets. It can be used to control:
- Garage doors, electric doors, house doors, shutter doors, expansion doors, gate doors, road gates.
- Electric curtains, water pumps, fans, lamps, LED lights, bulbs, ventilation devices.
- Signal transmission.
- Motor positive and negative rotation, motor switches, and DIY projects.
Figure 2: Visual examples of the remote control switch applications, including lamps, equipment, stage lighting, water pumps, automatic doors, and modified vehicles.
2. Technical Specifications
| Feature | Specification |
|---|---|
| Model Number | 2402+KT07 |
| Working Voltage | DC 6V / 12V / 24V / 30V |
| Input/Output Voltage | 1V ~ 250V (Passive output) |
| Quiescent Current | <5mA |
| Max Current | 10A |
| Max Load | 300W |
| RF Frequency | 433MHz (433.92MHz) |
| Working Temperature | -30°C ~ +80°C |
| Receiving Sensitivity | >-97dbm |
| Storage Remote Controls | Up to 20 pieces |
| Support Encoding | 1527 Learning code / 2262 fixed code |
| RF Operating Mode | ASK superheterodyne wireless reception |
| Receiving Range | Open space is more than 30-50 meters |
| Remote Operating Modes | Momentary / Toggle / Latched / Mix Mode |
| Channel | 2 |
| Support APP | No |
| Remote Battery | 2*CR2016 |
| Certification | CE, RoHS |
Note: The output type is passive output / potential-free contacts.
3. Installation
3.1 Installation Warnings
- Always connect wires with the power outage state.
- Connect the wires correctly according to the circuit diagram; do not reverse the polarity.
- When fixing the wire in the terminal, tighten the screw firmly. Be careful to separate each wire and ensure they do not touch each other.
- The receiver and transmitter are usually pre-paired at the factory. If not, you will need to reprogram them.
- Perform a reset before changing the operating mode. After a reset, all previously paired remote controls will no longer work.
- Replace the battery in the remote transmitter in time when its voltage is low.
- Slightly stretch the antenna on the receiver for better signal reception.
- After the receiver is powered on and in use, do not touch the metal parts on the circuit board by hand to avoid the risk of electric shock.
- Place the receiver in a stable and dry location where it is not easily touched.
3.2 Wiring Instructions
To use this remote control kit, connect the wires correctly. Different controlled devices require different wiring diagrams. The receiver board has clearly labeled terminals:
- NO: Normally Open pin
- COM: Common pin
- NC: Normally Closed pin
- +V: Positive power input
- -V: Negative power input (GND)
Figure 3: Receiver board showing the Antenna, Indicator Light, Learning Button, and input/output terminals (+V, -V, NO, COM, NC).
Refer to the following diagrams for common wiring scenarios:
Figure 4: Wiring diagrams for connecting the receiver with a DC motor (forward and reverse), an AC motor (forward and reverse), a light using an extra power source, and a light directly.
4. Operating Modes and Programming
This receiver supports four operating modes: Momentary, Toggle, Latched, and Mix Mode. The remote control kit is typically pre-programmed at the factory. If you need to change modes or re-pair, follow the instructions below. Remember to reset the receiver before changing modes.
4.1 Momentary Mode
Function: Press and hold the button, the relay will turn on; release the button, the relay will turn off.
Figure 5: Illustration of Momentary mode, where the light stays on only while the remote button is pressed.
How to Program:
- Press the learning button (on the receiver) 1 time. The indicator LED on the receiver will turn off.
- Press button "A" on the remote transmitter. The indicator LED on the receiver will flash several times and then turn off.
- Press button "B" on the remote transmitter. The indicator LED on the receiver will flash several times and then turn on.
4.2 Toggle Mode
Function: Press button "A", the relay will turn on; press button "A" again, the relay will turn off.
Figure 6: Illustration of Toggle mode, where pressing the button once turns the light on, and pressing it again turns it off.
How to Program:
- Press the learning button (on the receiver) 2 times. The indicator LED on the receiver will turn off.
- Press button "A" on the remote transmitter. The indicator LED on the receiver will flash several times and then turn off.
- Press button "B" on the remote transmitter. The indicator LED on the receiver will flash several times and then turn on.
4.3 Latched Mode
Function: (Transmitter needs to have 3 or more buttons) Press button "A", relay "1" will turn on; press button "B", relay "2" will turn on, and at the same time relay "1" will turn off.
Figure 7: Illustration of Latched mode, where pressing button A turns on one relay, and pressing button B turns on the second relay while turning off the first.
How to Program:
- Press the learning button (on the receiver) 3 times. The indicator LED on the receiver will turn off.
- Press button "A" on the remote transmitter. The indicator LED on the receiver will flash several times and then turn off.
- Press button "B" on the remote transmitter. The indicator LED on the receiver will flash several times and then turn on.
4.4 Mix Mode
Function: Relay 1 operates in Momentary mode; Relay 2 operates in Toggle mode.
How to Program:
- Press the learning button (on the receiver) 4 times. The indicator LED on the receiver will turn off.
- Press button "A" on the remote transmitter. The indicator LED on the receiver will flash several times and then turn off.
- Press button "B" on the remote transmitter. The indicator LED on the receiver will flash several times and then turn on.
4.5 Reset (Clean Data)
To clear all programmed remote controls and modes from the receiver:
- Press the learning button (on the receiver) 8 times. The indicator LED on the receiver will flash several times and then turn off. This indicates a successful reset.
Important: After a reset, all remote controls will no longer be able to control the receiver. If you wish to change operating modes, you must first perform a reset.
5. Maintenance and Troubleshooting
5.1 Maintenance
Regular maintenance is not typically required for this device. Ensure the receiver is kept in a stable, dry place and avoid touching live components when powered. Replace remote control batteries (CR2016) as needed.
Figure 8: Remote control detail, highlighting the CR2016 battery type.
5.2 Troubleshooting
If the receiver and transmitter are not operating normally, try the following steps:
- Check Battery Power: Verify if the remote control batteries are depleted. The indicator LED on the remote transmitter may not light up or appear dimly lit if the battery is low.
- Verify Wiring: Ensure your receiver is wired correctly according to the circuit diagrams provided in Section 3.2. Incorrect wiring is a common cause of issues.
- Reprogram: Reprogram the receiver and transmitter. This often resolves many operational problems. Refer to Section 4 for programming instructions.
- Antenna Position: Ensure the receiver's antenna is slightly stretched for optimal signal reception.
If the problem persists after trying these steps, please contact customer support.
6. User Tips
- Ease of Use: Users have found this product simple to set up and use, performing as expected.
- Versatile Applications: Beyond common uses, the system is effective for various home and industrial applications, including electric doors, lighting, automated curtains, and switches.
- Broad Applicability: It can be successfully integrated into diverse environments such as houses, farms, factories, offices, and supermarkets.
7. Warranty and Support
7.1 Certifications
This device is compliant with Directive 2014/53 EU Rules and holds CE and RoHS certifications, ensuring it meets European safety, health, and environmental protection requirements.
Figure 9: Quality Assurance documentation, displaying RoHS and CE compliance certificates.
7.2 Contact Information
For any questions or support regarding the product, please contact us:
- Email: dieseelectronic@163.com
- WhatsApp: +86 13502278583 / +86 18138805271
- Address: Room 03, 12th Floor, Building T19, East Coast Garden, Fangzhilonghuwan, No. 27, Sanhuan South Road, Huicheng District, Huizhou City, Guangdong Province, China 516001
A comprehensive user manual in PDF format is also available for download. Please refer to the product page for the direct link.