1. Introduction
Welcome to your Tuya Smart WiFi PM2.5 Box, an intelligent device designed for remote monitoring of your indoor air environment. This device accurately detects PM2.5, PM10, temperature, and humidity. When environmental parameters exceed predefined thresholds, the device can automatically optimize your household environment by linking with other smart home appliances such as air conditioners, fans, humidifiers, and air purifiers.
Important Note: To prevent damage to the sensor, avoid placing the PM2.5 Box in areas with excessive lampblack, strong convection air, or high concentrations of organic gases for extended periods.

2. Setup
2.1. Packing List
- PM2.5 Box: 1 unit
- Instruction Manual: 1 unit
- Card Pin: 1 unit
- USB Power Supply Cord: 1 unit
2.2. App Installation
- Scan the QR code below to download and install the Smart Life APP.
- Register an account and log in.
- Set up your family/home within the app.

2.3. Adding Equipment
- Ensure you have a stable 2.4 GHz WiFi network signal.
- Connect the PM2.5 Box to power using the 5V/1A USB power plug and cable.
- Upon powering on, the PM2.5 Box indicator light will flash, indicating it's in distribution network mode. If the light does not flash, press and hold the black reset button at the bottom of the PM2.5 Box for 5 seconds, then release to reset the device.
- Open the Smart Life APP, tap the "+" icon, and find the "Sensor" category.
- Select "WiFi sensors" from the list.
- Confirm that the PM2.5 Box indicator light is flashing, then tap "Next" to proceed with the distribution network process.
- Ensure your mobile phone is connected to the same 2.4 GHz WiFi network. Enter your WiFi password and tap "Confirm".
- The APP will display a connection interface. Once it reaches 100%, the device will be successfully added.
- Select the room for the device, modify its name if desired, and tap "Complete". The APP will then display the device interface.

2.4. Preheating
After connecting the PM2.5 Box to power, the sensor requires 1-3 minutes to preheat to ensure accurate detection. Please allow this time before expecting stable readings.
2.5. Test Environment
For optimal testing and accurate readings, it is recommended to place the PM2.5 Box in a sealed container or a controlled space.
3. Operating the Device
3.1. Monitoring Air Quality
The PM2.5 Box provides real-time display of PM2.5, PM10, temperature, and humidity values directly on the connected Smart Life APP. You can view current readings and historical data graphs.


3.2. Smart Linkage and Automation
The PM2.5 Box can be linked with other Tuya-compatible smart home equipment to create automated scenarios. This allows for automatic control of appliances based on air quality parameters.
- In the Smart Life APP, navigate to the "Smart" section.
- Tap the "+" icon to create a new smart automation.
- Set conditions: Select "Device status changes" and choose your PM2.5 Box. Then, select the environmental parameter (PM2.5, PM10, temperature, or humidity) and define the trigger condition (e.g., greater than, less than, or equal to a specific threshold).
- Set tasks: Choose the operating equipment (e.g., air conditioner, air purifier, humidifier, fan) from your device list. Select the specific commands to control (e.g., turn on/off, adjust settings).
- Name your automation, set its effective time, and save. The automation will be immediately enabled.


3.3. Multi-Device Management
The Smart Life APP allows you to bind and manage multiple PM2.5 Boxes or other smart devices simultaneously. You can customize room names for easy organization and control air quality across different areas of your home.

3.4. Demonstration Video
4. Maintenance
4.1. General Care
- Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures or humidity.
- Do not disassemble the device, as this may void the warranty and cause damage.
4.2. Sensor Care
The sensor is a delicate component. To ensure its longevity and accuracy:
- Do not place the PM2.5 Box in areas with excessive lampblack (e.g., near cooking fumes), strong convection air, or high concentrations of organic gases for extended periods. Such environments can damage the sensor.
- Ensure proper ventilation around the device.
5. Troubleshooting
5.1. Device Not Connecting / Indicator Light Not Flashing
If the indicator light on the PM2.5 Box does not flash when powered on, indicating it's not in distribution network mode:
- Press and hold the black reset button at the bottom of the PM2.5 Box for 5 seconds.
- Release the button. The device should now reset and the indicator light should begin flashing.
- Attempt to add the equipment again following the steps in Section 2.3.
5.2. Inaccurate Readings
- Ensure the device has completed its 1-3 minute preheating period after being powered on.
- Verify that the device is not placed in an environment with excessive lampblack, strong convection, or high organic gas concentrations, as these can affect sensor accuracy.
- Note that this product is designed for a family environment, and data is for reference only. It is not professional-grade equipment, so minor variations are expected.
6. Specifications
| Parameter | Minimum | Maximum | Unit |
|---|---|---|---|
| Working Temperature | -20 | 85 | °C |
| Working Voltage | 4.8 | 12 | V |
| Working Current | 10 | 496 | mA |
| Size | 100*100*35 | mm | |
| Power Supply Mode | USB 5V/1A | ||
| Communication Protocol | WIFI 2.4GHZ | ||
| Color | Blue | ||
| Shell Material | ABS | ||
| Weight | 92g | ||
| Range (PM10) | 0 | 1000 | ug/m3 |
| Range (Temperature) | 0 | 60 | °C |
| Range (Humidity) | 0 | 99 | % |
| Range (PM2.5) | 0 | 1000 | ug/m3 |



7. Warranty and Support
For detailed warranty information and customer support, please refer to the official Tuya Smart website or contact your retailer. A user manual in PDF format is also available for download from the seller's product page for additional guidance.
This product is intended for home use. While it provides valuable environmental data, it is not a professional-grade instrument, and its readings should be considered for reference only.
8. User Tips
- Optimal Placement: For the most accurate readings, place the sensor in a central location within the room, away from direct drafts, windows, or heat sources.
- Regular Monitoring: Utilize the app's historical data feature to track air quality trends over time and identify patterns that might require adjustments to your indoor environment.
- Smart Automation: Experiment with different automation rules to find the perfect balance for your home. For example, set your air purifier to turn on automatically when PM2.5 levels exceed a certain threshold.
- Multi-functional Use: Remember this device is a versatile four-in-one sensor, capable of detecting PM2.5, PM10, temperature, and humidity, making it a comprehensive tool for environmental monitoring.