Eachine DTX03

Contents

Eachine DTX03 DVR FPV Transmitter User Manual

Model: DTX03 | Brand: Eachine

Introduction

The Eachine DTX03 is a compact and versatile 5.8GHz FPV (First Person View) video transmitter (VTX) designed for RC drones. It features a built-in Digital Video Recorder (DVR) for real-time image acquisition and recording, switchable output power (0/25mW/50mW/200mW), and 72 channels across 9 bands. This manual provides essential information for the proper setup, operation, and maintenance of your DTX03 FPV transmitter.

Front view of the Eachine DTX03 FPV Transmitter with attached antenna and wiring harness.
Front view of the Eachine DTX03 FPV Transmitter with attached antenna and wiring harness.

Product Features

  • Switchable Output Power: Easily switch between 0mW, 25mW, 50mW, and 200mW to comply with local regulations and optimize range. (Setting output power to 0mW avoids frequency interference during initial setup).
  • Digital Display: Integrated digital display for clear indication of current channel, band, and power settings.
  • Ultra-Frequency & Channels: Supports 72 channels across 9 bands, including Raceband, providing extensive frequency options (5325-5945 MHz).
  • DVR Function: Built-in DVR allows real-time recording of FPV footage directly to a Micro SD card.
  • Storage Memory: Unique storage memory function for recorded videos.
  • Audio Processing: Super audio processing technology for clear audio transmission.
  • One-Key Playback: Convenient one-key playback feature for reviewing recorded footage.
  • Compact and Lightweight: Super mini size and light weight (approx. 6.97g) ideal for small drones.
Key features of the Eachine DTX03 FPV Transmitter including switchable power, digital display, 72 channels, DVR function, and audio processing.
Key features of the Eachine DTX03 FPV Transmitter.

Specifications

SpecificationValue
Brand NameEachine
Item NameDTX03 DVR FPV VTX
Output Power0/25mW/50mW/200mW switchable
Input Voltage3.2-5.5V
Current Consumption (25mW)630mA-390mA
Current Consumption (50mW)750mA-450mA
Current Consumption (200mW)970mA-550mA
Video SystemNTSC/PAL
Video FormatAVI
Output Signal Strength14 ± 1db
Output Impedance55Ω
Audio Carrier10KΩ
Audio Carrier Level-28- -30dBc
Micro SD Card SupportMax 32GB (CLASS 10 recommended)
Operating Temperature-10 - 60 degrees C
Antenna Dimensions22mm X 29mm diameter
Antenna Type4 lobe right hand circular polarized
Frequency5.8GHz 9 bands 72 channels (Raceband: 5325-5945 MHZ)
Size (L*W)28*18.04mm
Weight6.97g
Detailed specifications of the Eachine DTX03 FPV Transmitter including output power, input voltage, current consumption, video system, and audio format.
Detailed specifications of the Eachine DTX03 FPV Transmitter.
Eachine DTX03 FPV Transmitter on a digital scale displaying a weight of 7 grams.
The DTX03 FPV Transmitter weighs approximately 7 grams.

Setup

Before operating your DTX03 FPV Transmitter, ensure it is correctly connected to your drone's power supply and camera. Refer to the wiring diagram below for proper connections.

Diagram of the Eachine DTX03 FPV Transmitter with labels for LED display, microphone, control buttons (CS1, CS2, CS3), and wiring connections (3.2-5.5V, GND, Video out, Video in).
Eachine DTX03 FPV Transmitter wiring and component labels.

Wiring Connections:

  • Power Input: Connect the 3.2-5.5V wire to your drone's power source. Ensure the voltage is within the specified range.
  • Ground (GND): Connect the GND wires to the common ground of your drone's system.
  • Video In: Connect the Video In wire from your FPV camera's video output.
  • Video Out: This output is typically for internal DVR recording or can be used for an OSD (On-Screen Display) if applicable.
  • Microphone: The integrated microphone captures audio.

Micro SD Card Installation:

Insert a Class 10 Micro SD card (up to 32GB) into the designated slot for DVR functionality. The device will automatically begin recording upon boot-up if a card is present.

Operating Instructions

The DTX03 features an LED display and three control buttons (CS1, CS2, CS3) for navigation and settings adjustment.

1. Adjusting Channel, Band, and Power:

  1. Power On: Power on the VTX. The blue LED display will show '0', indicating the VTX is powered on but in an off status without transmission.
  2. Change Channel (CH): Short-press any button (likely CS2 or CS3, as per image) to change the channel. The digital display will cycle from 1 to 8.
  3. Change Frequency Band (FR): Long-press any button for 2 seconds until the digital display flickers. Then, short-press the button to cycle through frequency bands: A, b, E, F, r, U, o, L, H.
  4. Change Output Power: Long-press any button for 5 seconds until the digital display flickers. Then, short-press the button to change the power setting:
    • One hyphen (-) indicates 25mW
    • Two hyphens (--) indicate 50mW
    • Three hyphens (---) indicate 200mW
  5. Save Settings: After setting, the CH, FR, and power will flicker alternately for 5 seconds, then the settings are saved. The VTX has memory for settings.
Table showing 5.8GHz frequency bands (A, b, E, F, r, U, o, L, H) and their corresponding 72 channel frequencies in MHz.
5.8GHz Frequency and Channel Table.

2. Video Recording:

  • When an SD card is inserted, the device will default to automatic video recording upon boot-up.
  • To end the current video recording, short-press the CS2 key.
  • To start a new recording, short-press the CS2 key again.

3. Video Playback:

  • Long-press the CS1 key to enter the video playback page.
  • Use CS1 and CS3 keys to scroll up and down through recorded videos.
  • Press the CS2 button to play or pause the selected video.
  • To exit playback and return to the main page, long-press the CS1 key again.

4. Menu Settings:

  • From Video Recording: Short-press CS2 to end the current video, then long-press CS2 again to enter the Settings menu. Long-press CS2 to exit the menu.
  • From Main Page (No Recording): To enter the menu, short-press a scroll key (CS1 or CS3) followed by a long-press of CS2. Use CS1 and CS3 to navigate (scroll up/down). Long-press CS2 to exit the menu and return to the main page.

Maintenance

  • Cleaning: Keep the VTX clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids or solvents.
  • Antenna Care: Ensure the 4-lobe antenna is securely attached and not bent or damaged. A damaged antenna can significantly reduce signal range and quality.
  • Storage: Store the VTX in a dry, cool place away from direct sunlight and extreme temperatures when not in use.
  • Firmware: Check the manufacturer's website periodically for any firmware updates that may improve performance or add features.
  • SD Card: Regularly back up and format your Micro SD card to ensure optimal recording performance and prevent data corruption.

Troubleshooting

  • No Video Signal:
    • Check all wiring connections (power, ground, video in) to ensure they are secure and correct.
    • Verify that the input voltage is within the 3.2-5.5V range.
    • Ensure your FPV camera is powered on and functioning.
    • Confirm that your FPV goggles/receiver are on the correct frequency and band as the VTX.
    • Check the VTX output power setting; ensure it's not set to 0mW for transmission.
  • Poor Video Quality/Range:
    • Ensure the antenna is securely connected and undamaged.
    • Increase the output power setting (25mW, 50mW, or 200mW) if permissible in your region.
    • Check for sources of interference (e.g., other 5.8GHz devices, strong Wi-Fi signals).
    • Ensure line-of-sight between the VTX and your receiver.
  • DVR Not Recording:
    • Verify that a Class 10 Micro SD card (max 32GB) is properly inserted.
    • Check if the SD card is full; if so, back up and format it.
    • Ensure the file system of the SD card is compatible (FAT32 is common).
    • Try a different SD card to rule out card malfunction.
  • Buttons Unresponsive:
    • Ensure the device is powered correctly.
    • If the device is hot, allow it to cool down.
    • If issues persist, disconnect power, wait a few seconds, and reconnect.

User Tips

  • Heat Management: FPV transmitters can generate heat, especially at higher power settings. Ensure adequate airflow around the VTX to prevent overheating, which can lead to performance degradation or damage.
  • Antenna Protection: In crashes, the antenna is often vulnerable. Consider using antenna protectors or mounting it in a way that minimizes impact risk.
  • Power-Up Sequence: Always ensure your FPV goggles/receiver are powered on and ready before powering up the VTX to avoid transmitting on an empty channel, which can sometimes cause issues with certain receivers.
  • SD Card Best Practices: Use a high-quality, genuine Class 10 Micro SD card for reliable DVR recording. Periodically transfer recordings to a computer and format the card in the device for best performance.

Warranty and Support

For warranty claims, technical support, or service inquiries, please contact the retailer or manufacturer directly. Keep your proof of purchase for any warranty-related requests. Always refer to the official product page or manufacturer's website for the most up-to-date information and support resources.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.