Introduction
Welcome to the SoundMAGIC TWS50 True Wireless Earbuds manual. These earbuds are designed to provide a superior audio experience with advanced features like Bluetooth 5.2, Qualcomm QCC3040 chip, aptX Adaptive decoding, and CVC 8.0 noise reduction for crystal-clear calls. Enjoy true wireless freedom, comfortable fit, and extended battery life with your new earbuds.
Video: An animated overview of the SoundMAGIC TWS50 earbuds, highlighting key features like Bluetooth 5.2, Qualcomm QCC3040 chip, CVC 8.0 noise reduction, one-step pairing, mono/binaural/sharing modes, 40-hour total battery life, wireless charging support, and IPX6.0 waterproofing.
Package Contents
Please check the box for the following items:
- SoundMAGIC TWS50 True Wireless Earbuds
- Charging Case
- Charging Cable (Type-C)
- Replaceable Eartips Set
- User Manual
Product Overview
The SoundMAGIC TWS50 earbuds feature a sleek design with intuitive touch controls and a compact charging case. Each earbud is equipped with a 5.8mm dynamic driver for rich audio.
Image: A close-up view of the white SoundMAGIC TWS50 earbuds nestled in their compact charging case.
Setup Guide
1. Charging the Earbuds and Case
Before first use, fully charge the earbuds and charging case.
- Wired Charging: Connect the provided Type-C charging cable to the charging port on the case and a USB power source. The LED indicator on the case will show charging status.
- Wireless Charging: Place the charging case on a compatible wireless charging pad. The case supports wireless fast charging. The display on the case will show the battery percentage (1-100).
- Earbud Charging: Place the earbuds into the charging case. They will automatically begin charging. Earphone charging takes approximately 30 minutes. Case charging takes about 20 minutes via cable, or 2 hours wirelessly.
Image: This image demonstrates the wireless charging compatibility and extended battery life, offering 40 hours of total playtime (5 hours from earbuds + 35 hours from the charging case).
Image: This image details the 40+ hours of strong battery life, with earphone charging taking about 30 minutes, case charging about 20 minutes, wireless charging about 2 hours, and a standby time of 45 days.
2. Pairing with Your Device
The TWS50 earbuds feature one-step pairing for convenience.
- Initial Pairing: Open the charging case. The earbuds will automatically enter pairing mode. On your device (smartphone, tablet, etc.), go to Bluetooth settings and select "TWS50" from the list of available devices.
- Automatic Reconnection: Once paired, the earbuds will automatically connect to the last paired device when taken out of the case.
Image: This visual guide outlines the easy touch controls and illustrates the one-step pairing process.
Image: This image illustrates the stable connection capabilities of the TWS50 earbuds, featuring Qualcomm QCC3040 chip, Bluetooth 5.2, and up to 13m transmission range.
Image: This image highlights the latest Qualcomm QCC3040 chip and Bluetooth 5.2 technology, providing an outdoor transmission distance of about 40-50 meters and an indoor transmission distance of about 12-15 meters.
3. Wearing the Earbuds
For optimal sound quality and comfort, ensure the earbuds are worn correctly.
- Select the appropriate size of eartips for a snug fit.
- Insert the earbuds into your ears and gently twist them to secure their position.
Image: This image provides a visual reference for achieving a comfortable and secure fit, showing both correct and incorrect wearing positions for the earbuds.
Image: This image emphasizes the comfortable fit of the TWS50 earbuds and provides dimensions for both the earbuds (2cm x 2.7cm) and the charging case (6.9cm diameter).
Operating Instructions
1. Power On/Off
- Power On: Open the charging case, and the earbuds will automatically power on.
- Power Off: Place the earbuds back into the charging case and close the lid. They will automatically power off and begin charging.
2. Touch Controls
The TWS50 earbuds feature intuitive touch controls on each earbud:
- Play/Pause Music: Touch either earbud once.
- Answer/End Call: Touch either earbud once.
- Reject Call: Press and hold either earbud for 2 seconds.
- Next Track: Double-touch the right earbud.
- Previous Track: Double-touch the left earbud.
- Volume Up: Touch and hold the right earbud for 0.5 seconds.
- Volume Down: Touch and hold the left earbud for 0.5 seconds.
- Activate Voice Assistant: Triple-touch either earbud.
Image: This visual guide outlines the easy touch controls for music playback, calls, and voice assistant activation.
3. Mono/Binaural/Sharing Modes
The TWS50 earbuds support True Wireless Mirroring technology, allowing flexible usage modes:
- Monaural Mode: Use a single earbud (left or right) independently for calls or music.
- Binaural Mode: Use both earbuds for a stereo audio experience.
- Sharing Mode: Share one earbud with a friend while you use the other, both connected to the same device.
Maintenance
1. Cleaning
- Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
- Remove eartips and clean any earwax or debris from the earbud nozzles using a small brush or cotton swab.
- Ensure charging contacts on both earbuds and case are clean and dry.
2. Storage
- When not in use, always store the earbuds in their charging case to protect them and keep them charged.
- Store in a cool, dry place away from extreme temperatures and direct sunlight.
3. Waterproofing
The SoundMAGIC TWS50 earbuds are IPX6 waterproof, meaning they are protected against high-pressure water jets from any direction. This makes them suitable for workouts and light rain, but they are not designed for submersion in water.
Troubleshooting
- Earbuds not pairing: Ensure both earbuds are charged. Place them back in the case, close the lid, then open it again to re-enter pairing mode. Forget "TWS50" from your device's Bluetooth list and try pairing again.
- Only one earbud working: Place both earbuds back in the charging case, close the lid, then open it again. This should reset their connection. If the issue persists, try re-pairing.
- No sound: Check the volume level on your device and the earbuds. Ensure the earbuds are properly connected to your device.
- Charging issues: Ensure the charging cable is securely connected and the power source is working. For wireless charging, ensure the case is correctly placed on a compatible wireless charging pad. Clean the charging contacts if necessary.
- Poor call quality: Ensure the earbuds are fully charged. The CVC 8.0 noise reduction should provide clear calls, but ensure you are in an area with good signal and minimal background noise.
Specifications
Image: A detailed table presenting the headphone specifications.
| Feature | Specification |
|---|---|
| Brand Name | SoundMAGIC |
| Model | TWS50 |
| Communication | True Wireless (Bluetooth 5.2) |
| Bluetooth Version | 5.2 (Qualcomm QCC3040 chip) |
| Wireless Range | 10m-20m (Indoor: 12-15m, Outdoor: 40-50m) |
| Vocalism Principle | Dynamic |
| Driver Diameter | 5.8mm |
| Number Of Drivers | 2 |
| Magnet Type | Neodymium |
| Impedance Range | up to 32 Ω (14Ω ± 10%) |
| Sensitivity | 42dB ± 3dB |
| Codecs | AAC, aptX Adaptive, SBC |
| Microphone | Yes (CVC 8.0 Noise Reduction) |
| Volume Control | Yes |
| Control Button | Yes (Touch Control) |
| Waterproof Rating | IPX6 |
| Charging Method | Charging case (Type-C, Wireless Charging compatible) |
| Continuous Play Time | 5-6 hours |
| Continuous Talk Time | 4-5 hours |
| Standby Time | 45 Days |
| Earbud Weight | 8g |
| Material | Metal, Silica Gel |
| Certification | CE, FCC, RoHS |
Image: This diagram emphasizes the excellent sound quality, powered by 5.8mm dynamic drivers and supporting aptX, AAC, and SBC audio codecs. A frequency response graph is also shown.
Image: This image explains the aptX Adaptive decoding support, which integrates excellent stability, high-definition sound quality, and lower delay time for an enhanced audio experience in music and games.
Image: This image highlights the upgraded CVC 8.0 call noise reduction, ensuring clear conversations for calls, online meetings, and courses.
Image: A visual summary of the TWS50's main features: Bluetooth 5.2, Qualcomm QCC3040 chip, synchronous transmission, high sound quality with AptX Adaptive decoding, 40h+ battery life, CVC noise reduction, and IPX6.0 waterproof and sweatproof rating.
User Tips
- Optimize Fit: Experiment with different eartip sizes to find the best seal for your ears. A good seal significantly improves bass response and noise isolation.
- Regular Cleaning: Clean your earbuds regularly, especially the eartips and speaker mesh, to maintain sound quality and hygiene.
- Case Charging: Always keep your charging case charged. It's your portable power bank for extended listening.
- Single Earbud Use: If you only need one earbud for calls or awareness of your surroundings, simply take one out of the case. The other can remain charging or off.
Safety Information
- Do not expose the earbuds or charging case to extreme temperatures, humidity, or corrosive substances.
- Avoid dropping, impacting, or disassembling the device.
- Keep out of reach of children and pets.
- Do not use the earbuds at high volume levels for extended periods to prevent hearing damage.
- Dispose of the product responsibly according to local regulations.
Warranty and Support
SoundMAGIC products are manufactured to the highest quality standards. For any issues or support inquiries, please refer to the contact information provided with your purchase or visit the official SoundMAGIC website. Please retain your proof of purchase for warranty claims.
