Hitachi EB 1212, EB 1214l, EB 1214, EB 1220bl, EB 1220hl

Contents

Hitachi 12V 1.5Ah Power Tool Battery User Manual

Model: EB 1212, EB 1214l, EB 1214, EB 1220bl, EB 1220hl

Introduction

This manual provides essential information for the safe and efficient use of your Hitachi 12V 1.5Ah replacement battery. Please read these instructions carefully before initial use and retain them for future reference. This battery is designed to power compatible Hitachi 12V power tools.

Hitachi 12V 1.5Ah Power Tool Battery

Image: Hitachi 12V 1.5Ah Power Tool Battery, showing its compact design.

Hitachi 12V 1.5Ah Power Tool Battery top view

Image: Top-down view of the Hitachi 12V 1.5Ah Power Tool Battery.

Specifications

Feature Detail
Battery Type Ni-Cd / Ni-MH (depending on specific model/batch, typically Ni-Cd for older tools)
Voltage 12V
Capacity 1.5Ah
Compatible Part Numbers EB 1212, EB 1214l, EB 1214, EB 1220bl, EB 1220hl, BCC1205, BCC1210, BCC1212, BCC1215, BCC1220, EB12, EB1212S, EB1214L, EB1214S, EB1220BL, EB1220HL, EB1220HS, EB1220RS, EB1222HL, EB1224, EB1226HL, EB1230HL, EB1230R, EB1230X, EB1233X, EB12B, EB12G, EB12M, EB12S, FEB12S, TB1214G, 19h, Akh1215

Compatibility

This battery is suitable for a wide range of Hitachi 12V power tools, including but not limited to:

  • Hitachi Series: DN, DS, DV, FDS, FDV, FWH, R series.
  • Specific Models: DS12DVF, DS12DVF2, DS12DVF3, DS12DVFA, DS12DVC, DV12DV, WF4DY, DS12DM, DS12DVB2, DN12DY, WR12DMR, WR12DAF2, WH12DMR, WH12DAF2, WR12DM2, WH12DM2, CL10D2, UB12DL, UB12D.

Always verify the part number on your original battery or tool manual to ensure full compatibility.

Setup

1. Initial Charging

  1. Upon receiving your new battery, it may not be fully charged. It is recommended to fully charge the battery before its first use.
  2. Use only a compatible Hitachi 12V battery charger. Refer to your charger's manual for specific charging instructions.
  3. Insert the battery into the charger, ensuring it clicks securely into place.
  4. Allow the battery to charge until the charger indicates a full charge (e.g., green light, indicator turns off).

2. Battery Installation

  1. Ensure your power tool is turned off and disconnected from any power source (if applicable).
  2. Locate the battery compartment on your Hitachi power tool.
  3. Align the battery with the tool's battery slot, matching the grooves and terminals.
  4. Slide the battery firmly into the tool until it locks into place with an audible click. Do not force the battery.
  5. To remove, press the battery release button(s) and slide the battery out.

Operating Instructions

General Usage

  • Always ensure the battery is fully charged for optimal performance and runtime.
  • Avoid completely draining the battery, as this can reduce its overall lifespan. Recharge when power noticeably decreases.
  • Do not expose the battery to extreme temperatures (hot or cold) during operation.

Charging Guidelines

  • Charge the battery in a well-ventilated area, away from flammable materials.
  • Do not charge a damaged or excessively hot battery. Allow it to cool down before charging.
  • Unplug the charger from the power outlet when not in use or when charging is complete.

Maintenance

Battery Care

  • Keep battery terminals clean and free from dirt or corrosion. Use a clean, dry cloth to wipe them if necessary.
  • Avoid dropping the battery or subjecting it to strong impacts.
  • Do not attempt to open, disassemble, or modify the battery pack.

Storage

  • Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
  • For long-term storage, charge the battery to approximately 50-70% capacity. Avoid storing fully charged or completely discharged batteries for extended periods.
  • Store batteries away from metal objects that could short-circuit the terminals.

Troubleshooting

Problem Possible Cause Solution
Battery not charging
  • Charger not plugged in.
  • Faulty charger.
  • Battery terminals are dirty or damaged.
  • Battery is too hot or too cold.
  • Check power connection.
  • Try another charger (if available).
  • Clean battery terminals.
  • Allow battery to reach room temperature.
Short run time
  • Battery not fully charged.
  • Battery is old or worn out.
  • Operating in extreme temperatures.
  • Ensure full charge before use.
  • Consider replacing the battery if it's old.
  • Use tool within recommended temperature range.
Battery not fitting tool
  • Incorrect battery model for the tool.
  • Obstruction in battery slot.
  • Verify compatibility with tool model/part number.
  • Check for debris or damage in the tool's battery slot.

Warranty and Support

For warranty information, please refer to the terms and conditions provided at the time of purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.

If you encounter issues not covered in this manual, please contact customer support for assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.