Sunsun HW Series Aquarium Outside Filter User Manual

1. Introduction

Thank you for choosing the Sunsun HW Series Aquarium Outside Filter. This external canister filter is designed to provide efficient water purification, silent operation, and energy saving for your aquarium. It features a multi-layer filtration system to maintain a healthy aquatic environment. This manual provides detailed instructions for the safe and effective use of your filter.

2. Safety Information

• Read all instructions carefully before use.
• Ensure the filter is placed on a stable, level surface below the aquarium water level to allow proper siphoning and return flow.
• Always disconnect power to the filter and any other aquarium equipment before performing maintenance or handling the filter.
• Do not operate the filter if the power cord or plug is damaged.
• Keep electrical connections dry.
• This product is designed for indoor use with aquariums only.
• Only 'B' series models (HW-602B, HW-603B) come with a circulating power water pump. HW-602 and HW-603 models do not include a pump and cannot be used alone; they require an external water pump.

3. Product Overview

The Sunsun HW Series external filters are designed for efficient multi-layer filtration. The 'B' models include an integrated pump, while the standard models (HW-602, HW-603) function as media reactors or pre-filters and require an external pump.

3.1 Key Features

• Efficient water purification
• Silent and energy-saving operation
• Multi-layer filtration system
• Environmentally friendly ABS plastic construction
• Wear-resistant and durable design
• Adjustable flow rate (with included valves)
• Secure clips for easy canister access

3.2 Components

The filter consists of several key components for effective operation:

Component List:

1. Filter Body (Canister)
2. Water Pump (Included only in 'B' series models)
3. Φ16 Inlet Adjuster
4. Upper Filter Sponge
5. Thin Filter Sponge
6. Mid Filter Sponge
7. Thick Filter Sponge
8. Under Filter Board
9. Regulating Valve
10. Inlet Pipe
11. Perforated Outlet Pipe
12. Universal Outlet Pipe
13. Rubber Tube (Hosing)

4. Specifications

Please refer to the table below for detailed specifications of each model. Note that dimensions are manually measured and may have a slight error of 1-3cm.

Note: HW-602 and HW-603 models are unpowered filter barrels and do not include a pump, water pipes, or import/export pipes. They must be used with an external water pump.

5. Installation and Setup

Follow these steps to properly install your Sunsun HW Series filter:

5.1 Unpacking and Component Check

Carefully unpack all components. Verify that all parts listed in Section 3.2 are present and undamaged. If you have a 'B' series model, ensure the circulating power water pump is included.

5.2 Filter Media Preparation

The filter bucket is loaded with three layers of filter cotton (hydrophobic, medium, thick) for physical filtration. You may customize or replace these with other filtering materials suitable for biological filtration to meet your aquarium's specific needs.

5.3 Connecting Hoses and Valves

Connect the inlet and outlet pipes to the filter head. Use the provided regulating valves (if applicable) to control water flow. Ensure all connections are secure to prevent leaks.

5.4 Placement and Water Circulation

Place the filter canister below the aquarium water level. Position the inlet pipe (intake) and outlet pipe (return) inside the aquarium. The inlet pipe draws water into the filter, and the outlet pipe returns filtered water to the tank.

Installation Diagrams:

6. Operation

6.1 Priming the Filter

Before starting the filter, ensure the canister is filled with water. For models without a pump (HW-602, HW-603), you will need to manually prime the system or use an external pump to fill the canister and establish water flow. For 'B' series models, the integrated pump will assist in priming.

6.2 Starting the Filter

Once the filter is primed and all connections are secure, plug in the power cord (for 'B' series models or your external pump). The filter should start circulating water. Adjust the flow rate using the regulating valves as needed.

7. Maintenance

Regular maintenance is crucial for optimal filter performance and water quality.

7.1 Cleaning Filter Media

Periodically clean or replace the filter sponges and other media. The frequency depends on your aquarium's bioload. To access the media, turn off the filter, disconnect power, and unclip the secure clips on the filter head.

7.2 Pump Maintenance (for 'B' series)

For 'B' series models, inspect the pump impeller and shaft for debris or wear. The pump features a durable stainless steel shaft for longevity and ease of cleaning.

7.3 General Cleaning

Clean the filter canister, hoses, and inlet/outlet pipes as needed to prevent buildup and maintain efficient flow.

8. Troubleshooting

If you encounter issues with your filter, try the following:

• Reduced Flow: Check if filter media is clogged and requires cleaning. Ensure hoses are not kinked or obstructed. Verify that the regulating valves are fully open.
• No Water Flow: Ensure the filter is properly primed and filled with water. Check power connection for 'B' series models or external pump. Verify that the pump impeller is not jammed.
• Leaks: Check all hose connections and O-rings for proper seating and tightness. Ensure the filter head is securely clipped to the canister.
• Excessive Noise: For 'B' series models, check the pump impeller for debris. Ensure the filter is placed on a stable surface to minimize vibrations.

9. User Tips

• Verify Contents: Upon receiving your filter, carefully check the package contents against the component list to ensure you have all necessary parts, especially if you ordered a model without a pump.
• Media Customization: The multi-layer design allows for easy customization of filter media. Consider adding biological media for enhanced ammonia and nitrite removal.
• Regular Cleaning: Consistent cleaning of filter media and hoses will prevent flow reduction and maintain optimal water quality.
• Placement: Always ensure the filter is placed below the aquarium water level for proper gravity-fed priming and efficient operation.

10. Warranty and Support

For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.