1. Introduction
Thank you for purchasing the Blueshow Beam 7r 230W Moving Head Light. This professional stage lighting fixture is designed to deliver high-impact beam effects for various events, including DJ sets, discos, nightclubs, and parties. This manual provides essential information for safe installation, operation, and maintenance of your new lighting equipment. Please read it thoroughly before use.
2. Safety Information
To ensure safe operation and prolong the lifespan of your device, please observe the following safety precautions:
- Always connect the device to a grounded power outlet.
- Ensure proper ventilation around the fixture to prevent overheating.
- Do not operate the device if the power cord is damaged.
- Avoid direct eye exposure to the light source.
- Keep the device away from moisture and extreme temperatures.
- Only qualified personnel should perform installation, maintenance, or repairs.
- Use safety cables when suspending the fixture.
3. Package Contents
Upon unpacking, please verify that all items listed below are included and in good condition:
- 1x Beam Moving Head Light
- 1x 1.2M Power Cable
- 1x 1M DMX Cable
- 1x Safety Cable
- 2x Light Hooks
- 2x Clamp Locks
- 1x Instruction Manual
- (Optional: Flightcase, depending on purchase variant)
4. Product Overview
The Blueshow Beam 7r 230W Moving Head Light features a robust design with precise control over its beam, colors, gobos, and prism effects. Below are diagrams illustrating its physical dimensions and control interfaces.
4.1 Dimensions
4.2 Views and Connections
Control Panel: Features an LCD display and navigation buttons (LEFT, OK, DOWN, RIGHT, UP) for menu access and settings adjustment.
Rear Connections: Includes DMX IN and DMX OUT ports for signal connection, POWER IN and POWER OUT for power daisy-chaining, a FUSE holder, and an ON-OFF SWITCH.
5. Setup
5.1 Mounting
The moving head light can be placed on a flat surface or mounted to a truss using the provided light hooks and clamp locks. Always ensure the mounting surface or truss is capable of supporting the fixture's weight (16kg N.W.) and use the safety cable as a secondary attachment.
5.2 Power Connection
Connect the provided 1.2M power cable to the POWER IN port on the rear of the fixture and then to a compatible AC110-240V, 50/60HZ power source. The fixture has a POWER OUT port for daisy-chaining power to other compatible units.
5.3 DMX Connection
For DMX control, connect a 3-pin DMX cable from your DMX controller's output to the DMX IN port of the first fixture. For multiple fixtures, connect the DMX OUT of the first fixture to the DMX IN of the next, and so on. Ensure the last fixture in the chain has a DMX terminator connected to its DMX OUT port.
6. Operation
The Blueshow Beam 7r 230W Moving Head Light offers multiple control modes:
- DMX 512: For professional control via a DMX controller, utilizing 16 DMX channels.
- Master-slave: Link multiple units where one acts as the master, controlling the others.
- Auto Program: Built-in automated programs for standalone operation.
6.1 Basic Functions
- Pan & Tilt: The fixture offers 540° Pan and 270° Tilt movement with 16-bit fine control for precise positioning.
- Color Wheel: Features 14 interchangeable colors plus white, including dichroic colors for vibrant effects.
- Gobo Wheel: Equipped with 17 static gobos plus open, allowing for various pattern projections. Gobo shake and accurate positioning are supported.
- Prism: Includes an 8+16+24 facet rotating prism for dynamic beam splitting effects.
- Dimmer: Smooth electronic dimmer from 0% to 100%.
- Frost: Linear frost effect for softening the beam.
- Focus: Electronic focus for sharp or blurred beam edges.
- Strobe: Mechanical shutter with adjustable speed strobe effect.
6.2 Effect Examples
7. Maintenance
Regular maintenance helps ensure optimal performance and longevity of your moving head light.
- Cleaning: Periodically clean the lenses and exterior with a soft, lint-free cloth. Do not use harsh chemicals.
- Ventilation: Ensure all ventilation openings are clear of dust and debris. The fixture features bearing fans for a favorable cooling system.
- Bulb Replacement: The Os-ram Sirius HRI 230W (7R) bulb has a lifetime of approximately 2000 hours. Replacement should be performed by a qualified technician.
- Inspection: Regularly check cables, connections, and mounting hardware for any signs of wear or damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable disconnected, fuse blown, power switch off | Check power cable, replace fuse, ensure power switch is ON. |
| No DMX control | Incorrect DMX address, faulty DMX cable, no terminator | Verify DMX address, check/replace DMX cables, use DMX terminator. |
| Fixture not moving/responding | DMX signal issue, motor fault, internal error | Check DMX connection, power cycle the unit. If problem persists, contact support. |
| Light output dim or inconsistent | Bulb nearing end of life, dirty lenses, power fluctuation | Replace bulb, clean lenses, ensure stable power supply. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Blueshow |
| Model Number | Beam 7r 230W |
| Item Type | Stage Lighting Effect |
| Occasion | Professional Stage & DJ |
| Power Supply | AC110-240V, 50/60HZ |
| Power Consumption | 450W |
| Light Source | Os-ram Sirius HRI 230W (7R) |
| Lifetime | 2000 Hours |
| Color Temperature | 8000K |
| Ballast | Electronic Ballast |
| Color Wheel | 14 Colors + White |
| Gobo Wheel | 17 Gobos + Open |
| Prism | 8+16+24 Facet Rotating Prism |
| Beam Angle | 3.8° |
| DMX Channel | 16 CH |
| Control Mode | DMX 512, Master-slave, Auto program |
| Dimmer | 0% - 100% Smooth |
| Frost | Linear |
| Focus | Electronic |
| Shutter/Strobe | Mechanical, Adjustable Speed |
| Display | English & Chinese LCD |
| Pan Movement | 540° + 16bit Fine |
| Tilt Movement | 270° + 16bit Fine |
| Net Weight (N.W) | 16kg |
| Gross Weight (G.W) | 17kg |
| Light Size | 42cm x 41cm x 53cm |
| Carton Package Size | 430mm x 420mm x 540mm |
| Certification | CE, RoHS |
10. User Tips
- For optimal beam clarity, regularly clean the front lens element.
- When using multiple fixtures, consider using a DMX signal amplifier for long cable runs to ensure signal integrity.
- Experiment with different gobo and prism combinations to create unique visual effects.
- Utilize the 16-bit fine control for Pan and Tilt to achieve smooth and precise movements during programming.
11. Warranty and Support
This product comes with a standard manufacturer's warranty. For specific warranty details, technical support, or service inquiries, please contact your point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.