GEYA GATS-G-4P-160A

Contents

GEYA ATS PC Class Automatic Transfer Switch Instruction Manual

Model: GATS-G-4P-160A

1. Introduction

This manual provides detailed instructions for the GEYA GATS-G-4P-160A Automatic Transfer Switch (ATS). The ATS is designed for seamless power transfer between a main power source (City Power) and a backup power source (AC Generator or inverter) in less than 50 milliseconds, ensuring an uninterruptible power supply. It features high-quality silver contact points, red copper parts, and stable relay control for reliable performance. Please read and understand these instructions carefully before installation, operation, or maintenance.

Video: GEYA Company Overview, showcasing manufacturing processes, product range, and quality control for low voltage electrical and automatic control products.

2. Safety Information and Warnings

Before installing or operating the ATS, carefully read and understand all instructions. Only qualified professional ATS personnel should perform installation, adjustment, repair, and maintenance.

  • Many parts of the ATS, including printed circuit boards, operate with live voltage. Do not touch these parts. Use only insulated tools.
  • Do not touch unprotected components.
  • Before any maintenance on the ATS, take the following preventive measures:
    1. Disconnect all power.
    2. Place "prohibited closing" signs near the switch.
    3. Switch to the "0" (off) position and then apply a padlock.
  • Ensure the line voltage is within the specified power supply voltage range indicated on the ATS nameplate. Inconsistent voltage ranges will damage the ATS and equipment.

3. Specifications

The GATS-G-4P-160A ATS is a 4-pole automatic transfer switch with a rated current of 160A. Key technical parameters are detailed below:

Main Technology Parameters
ParameterValue
Model NumberGATS-G-4P-160A
Poles4P
Rated Current (In)160A
Rated Voltage (Ue)AC400V
Rated Insulation Voltage (Ui)690V
Rated Concussion Withstand Voltage (Uimp)8KV
Using CategoryAC-33iB
Rated Short-circuit Connection Capacity17KA
Rated Short-time Withstand Current (Icw)10kA/60ms
Transfer Time (I-II or II-I)2.5s
Control VoltageDC24V, 48V, 110V, AC220V
Rated Frequency50/60Hz
Weight (4Pole)6.7 kg

4. Product Overview and Structure

The GEYA ATS is a dual power automatic transfer switch designed for seamless transition between two power sources. It features a robust construction with clearly labeled terminals and controls.

GEYA GATS-G-160-4P Automatic Transfer Switch front view
Figure 1: Front view of the GEYA GATS-G-160-4P Automatic Transfer Switch, showing terminals and control panel.

Key Components:

  • Switch Body: The main housing of the ATS.
  • Model and Specification Label: Provides product identification.
  • Power Switch Button: For electric ON/OFF control.
  • Position Indication: Displays the current power source (I, 0, or II).
  • Operate Handle: For manual operation of the switch.
  • Electric Key Lock: Controls the internal control power supply. When open, the switch can be operated automatically and remotely. When closed, it can only be operated by the handle.
  • Mechanic Padlock: Used for safety during inspection. Turn the switch to "0", pull the padlock mechanism, and close the padlock. This cuts off internal control power and prevents electric or manual operation.
Uninterruptible Power Supply Diagram with ATS
Figure 2: Diagram illustrating the ATS in an uninterruptible power supply setup, showing automatic transfer between City Power (Normal) and AC Generator (Backup) in less than 50ms.

5. Installation and Setup

5.1 Pre-Installation Checks:

  • Verify that the received ATS matches the ordered product.
  • Confirm the voltage rating of the ATS. Ensure the operating voltage is within the specified range on the nameplate.

5.2 Installation Method:

Install the ATS according to the provided instructions and ensure all external accessories are properly fitted. The correct installation methods are crucial for safe and reliable operation. Incorrect installation can lead to malfunction or damage.

5.3 Outline and Dimensions:

Refer to the detailed dimension tables and diagrams in the full user manual for precise measurements and mounting requirements for various current ratings (16A-3200A).

6. Wiring Instructions

Proper wiring is essential for the safe and correct operation of the ATS. Pay close attention to the phase sequence of both main and emergency power sources.

Wiring Diagram for GEYA ATS
Figure 3: Detailed wiring diagram showing connections for Main Power, Backup Power, and Load. Terminals A, B, C, N are clearly marked.

6.1 Primary Wiring:

  • Connect the bus bars of the switch to the corresponding rated current.
  • Connect the control wire and external indication wires as per the manual instructions.
  • The control power is derived from normal power, emergency power, and N phases.
  • I and II line control power (AC220V) should be connected to terminals 102-103 and 104-105 respectively. Terminals 102 and 104 are for normal power, while 103 and 105 are for emergency power live lines.
  • Terminals 101 and 106 act as signal lamps to control the power supply. Note: Terminals 101 and 106 should not be connected to any other lines.
  • For input lines, the A, B, C phases of both I and II lines should be connected with copper lines or lines acting as output.

6.2 Terminal Connection Method:

Use a screwdriver to firmly insert wires into the terminals. Ensure proper contact and secure fastening to prevent loose connections.

7. Operation

The GEYA ATS supports both automatic and manual operation modes. Ensure the control voltage is AC220V.

7.1 G Type Economic ATS (16A-100A) Operation:

  • Electric Key Lock: When the electric key lock is open, the switch can be operated automatically and remotely. When the electric key lock is closed, the switch can only be operated by the handle.
  • Operating Handle: When operating the switch manually, the electric key lock must be closed.
  • Position Indication: The indicator shows the current working state (I, 0, or II).

7.2 G Type Fire Type ATS (16A-3200A) Operation:

  • Automatic Debugging:
    • If both normal and emergency power supplies are electric, the switch will be on line I.
    • If normal power is off and emergency power is electric, the switch will be on line II.
    • If normal power is electric and emergency power is off, the switch will be on line I.
  • Remote Debugging:
    • Press the bush button SB1 to switch to line I.
    • Press the bush button SB2 to switch to line II.
  • Automatic/Remote (Manual) Debugging:
    • When the function selection switch is set to automatic, the switch operates as per automatic debugging.
    • When the function selection switch is set to remote (manual), the switch operates as per remote debugging.
  • Signal Lamp Indication: When the switch is on line I or II, the corresponding signal lamp on the panel will illuminate.

8. Maintenance

Regular maintenance ensures the longevity and reliable performance of your GEYA ATS. Always follow safety precautions before performing any maintenance.

  • Before any maintenance, disconnect all power sources and ensure the switch is in the "0" position and locked out.
  • Periodically inspect all connections for tightness and signs of wear or damage.
  • Keep the unit clean and free from dust and debris.
  • For detailed maintenance procedures, consult a qualified electrician or refer to the full user manual.

9. Troubleshooting

If you encounter issues with your GEYA ATS, consider the following general troubleshooting steps:

  • No Power Transfer: Check if both main and emergency power sources are active. Verify all wiring connections are secure and correct. Ensure the control voltage is present.
  • Incorrect Position Indication: If the signal lamps do not match the switch position, check the control wiring and the function selection switch setting.
  • Switch Not Operating Manually: Ensure the electric key lock is closed when attempting manual operation with the handle.
  • Switch Not Operating Automatically: Ensure the electric key lock is open and the function selection switch is set to automatic.
  • Overheating/Burning Smell: Immediately disconnect power and contact a qualified electrician. This could indicate a serious electrical fault.

For complex issues or if troubleshooting steps do not resolve the problem, contact a qualified electrician or GEYA customer support.

10. User Tips

  • Always ensure the ATS is installed by a certified professional to guarantee safety and proper functionality.
  • Regularly check the physical condition of the ATS and its connections for any signs of wear or damage.
  • Familiarize yourself with both automatic and manual operation modes for emergency situations.

11. Certifications

GEYA products, including this ATS, are certified to meet various international industry standards, ensuring quality and safety. These certifications include:

  • CCC (China Compulsory Certification)
  • CE (Conformité Européenne)
  • CB (Certification Body)
  • SAA (Standards Australia)
  • SEMKO (Svenska Elektriska Materielkontrollanstalten)
  • TUV (Technischer Überwachungsverein)
  • RoHS (Restriction of Hazardous Substances)
GEYA Certifications and Company Information
Figure 4: GEYA company information and product certifications, including CE, CB, SAA, ISO 9001, UKCA, and RoHS.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.