Product Overview
This high-quality ABS plastic fascia panel is designed to seamlessly integrate a 2 DIN car stereo (up to 9-inch or 10-inch screen) into your vehicle's dashboard. It provides a clean, OEM-style finish for your upgraded audio system.
The kit is available in two main sizes to accommodate different head units:
- 9-inch: Inner dimensions 230x220x130mm (fits most standard 2 DIN head units)
- 7-inch: Inner dimensions 178x102mm (requires a 9-inch to 7-inch adapter, which is included if you select the 7-inch option)
Material: Durable, heat-resistant ABS plastic.
Included Components: Main Frame Panel (pre-molded for 2 DIN stereos).

Installation Steps
Note: This manual assumes basic knowledge of car stereo installation. Professional help is recommended for complex wiring.
- Preparation:
- Disconnect the negative battery terminal to prevent electrical shorts.
- Remove keys from ignition and ensure the parking brake is engaged.
- Remove Factory Panel:
- Use a trim tool to gently pry off the original radio bezel.
- Unscrew/unclip the factory stereo and disconnect wiring harnesses.
- Install New Frame:
- Align the DIN frame with the dashboard opening.
- Secure using included brackets/clips (tighten screws firmly but avoid over-torquing).
- Mount Your Stereo:
- Slide the 2 DIN head unit into the frame, ensuring ports (USB/AUX/etc.) are accessible.
- Connect wiring harnesses (recommended: use vehicle-specific adapters for plug-and-play compatibility).
- Reassembly:
- Snap the frame into place, ensuring no gaps or misalignment.
- Reconnect the battery and test stereo functions (power, speakers, steering controls if applicable).

Operating Your New Setup
Once the frame kit and your new 2 DIN car stereo are successfully installed, the operation of your audio system will depend on the specific features and interface of your chosen head unit. The frame itself serves as a secure and aesthetically pleasing housing for the stereo, ensuring a factory-like appearance.
Refer to your new car stereo's instruction manual for detailed operating instructions, including navigation, audio settings, and connectivity features.
Safety & Maintenance Tips
- Do not force the frame during installation; trim excess material if needed.
- Avoid direct sunlight exposure for prolonged periods to prevent warping.
- Clean with a microfiber cloth and mild detergent (no abrasive chemicals).
Troubleshooting
- Problem: Loose fit
- Solution: Check bracket issue and alignment; add foam tape for snugness.
- Problem: Gaps around edges
- Solution: Verify OEM bezel is fully removed.
- Problem: Stereo doesn't power on
- Solution: Recheck wiring connections and battery terminal.
Specifications
| Feature | Detail |
|---|---|
| Item Type | Fascias |
| Suitable Vehicle | AUDI A3 (2003-2013) |
| Placement | Dashboard |
| Special Features | Fill the gap between the radio and car for installation of a new head unit |
| Material Type | High Quality ABS Plastic |
| Inner Size (9 inch) | 230x220x130mm (fits most standard 2 DIN head units) |
| Inner Size (7 inch) | 178x102mm (with adapter) |
| Item Weight | 0.5kg |
| Item Height | 13cm |
| Item Width | 22cm |
| Item Length | 23cm |
| External Testing Certification | CE |
| Origin | Mainland China |
Warranty & Support
- Warranty: 1-year limited warranty against manufacturing defects.
- Support: Contact the seller for missing parts or further assistance.
Enjoy your upgraded car audio system!
User Tips
- Users have reported that the frame fits perfectly on Audi A3 8P models from 2007.
- Ensure you select the correct size (7-inch or 9-inch) based on your new head unit. If installing a 7-inch radio, confirm the inclusion of the necessary 9-inch to 7-inch adapter.