GELID GP-Ultimate

Contents

GELID GP-Ultimate Thermal Pad User Manual

High-performance thermal interface material for electronic components.

Introduction

The GELID GP-Ultimate Thermal Pad is a high-performance thermal interface material designed for efficient heat dissipation from various electronic components. With a thermal conductivity of 15W/mK, it provides superior heat transfer, making it ideal for CPUs, GPUs, SSDs, motherboards, game consoles (like PS4), microcontrollers, memory ICs, and other SMD components. This thermal pad is non-electrically conductive, non-corrosive, non-hardening, non-toxic, and user-friendly, ensuring safe and reliable operation.

GELID GP-Ultimate Thermal Pad packaging showing thermal conductivity and available sizes
Figure 1: GELID GP-Ultimate Thermal Pad packaging, highlighting 15W/mk thermal conductivity and various size options.

Warnings & Safety Information

  • Do not use in humid environments.
  • Do not disassemble internal components without authorization.
  • Ensure adequate ventilation to prevent overheating.

Setup and Installation

The GP-Ultimate thermal pad is designed for simple application, suitable even for beginners. Follow these steps for proper installation:

  1. Wipe and clean the surface of the component (e.g., CPU, GPU, memory IC) thoroughly to remove any dust or residue.
  2. Measure and cut the thermal pad to the appropriate size for the component's surface.
  3. Carefully peel off one side of the protective film from the thermal pad.
  4. Place the thermal pad onto the component, ensuring full coverage of the heat source.
  5. Gently press down to ensure good contact, then peel off the remaining protective film.
  6. Install the heat sink or cooler over the thermal pad, applying even pressure.
Diagram showing four steps of thermal pad application: cut, place, peel, apply
Figure 2: Visual guide for applying the GELID GP-Ultimate Thermal Pad.

Operating Principles

The GELID GP-Ultimate Thermal Pad functions as a thermal interface material, bridging the microscopic air gaps between a heat-generating component and its heat sink. Its high thermal conductivity facilitates efficient heat transfer away from the component, helping to maintain optimal operating temperatures and prevent thermal throttling. Being non-electrical conductive, it ensures safety when used near sensitive electronic circuits.

Maintenance

To ensure continued optimal performance of your thermal pad and cooling system:

  • Regularly clean dust from your computer or device's cooling components (fans, heat sinks) to prevent accumulation that can hinder airflow and heat dissipation.
  • While the thermal pad itself is non-hardening and non-curing, periodic inspection during system cleaning can help identify any issues with the cooling assembly.

Troubleshooting

Common Issues:

  • Unable to install / Pad does not fit: Check if the component (e.g., CPU, GPU) is the appropriate model for the thermal pad size you have. Ensure you have selected the correct dimensions (e.g., 90x50mm, 120x20mm, 120x120mm) and thickness (0.5mm, 1.0mm, 1.5mm, 2.0mm, 3.0mm) for your application. The pad can be cut to size if needed.
  • Poor thermal performance after installation:
    • Ensure the protective films were completely removed from both sides of the thermal pad.
    • Verify that the thermal pad is making full and even contact with both the component and the heat sink.
    • Check for proper installation of the heat sink, ensuring adequate mounting pressure.
    • Ensure there is sufficient airflow within your system to dissipate heat effectively.

Specifications

Property Value
Brand GELID Solutions
Model Number GP-Ultimate
Type Thermal Pad
Thermal Conductivity 15 W/mK
Color Gray
Density 3.2 g/cm³
Hardness (Shore) 60-70 OO
Electrical Conductivity No (Non-electrical conductive)
Corrosive No (Non-corrosive)
Curing No (Non-curing)
Toxicity No (Non-toxic)
Continuous Use Temperature -60 to 220°C
Available Dimensions 90x50mm, 120x20mm, 120x120mm
Available Thicknesses 0.5mm, 1.0mm, 1.5mm, 2.0mm, 3.0mm
Back of GELID GP-Ultimate Thermal Pad packaging with detailed specifications and temperature test results
Figure 3: Detailed specifications and test setup results from product packaging.

User Tips

  • The GP-Ultimate thermal pad is non-stick, making it easy to remove and reposition if needed during installation.
  • Its ease of use makes it perfect for beginners looking to improve their system's thermal performance.
  • Installation can typically be completed in a matter of minutes, allowing for quick upgrades or repairs.

Warranty & Support

The GELID GP-Ultimate Thermal Pad comes with a 1-year warranty period from the date of purchase.

For further detailed instructions, technical specifications, or support, please refer to the official user manual available in PDF format. You can access the PDF document here: GELID GP-Ultimate Thermal Pad User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.