QIACHIP QA-R-011

Contents

QIACHIP 433MHz Wireless RF Remote Control Micro Switch Receiver Module

Model: QA-R-011 | Brand: QIACHIP

1. Introduction

This manual provides comprehensive instructions for the QIACHIP QA-R-011 433MHz Wireless RF Remote Control Micro Switch Receiver Module. This versatile module is designed for DIY applications, enabling wireless control of various electronic devices such as LED lamp strings, Christmas tree lights, electric doors, shutter doors, windows, and more. Its compact size, wide voltage compatibility, and high sensitivity make it an ideal solution for home automation and security projects.

The system operates on a 433MHz frequency and utilizes EV1527 learning code for secure and reliable communication between the transmitter (remote control) and the receiver module.

2. Safety Precautions

  • Electrical Safety: Always ensure power is disconnected before performing any wiring or installation. Failure to do so may result in electric shock or damage to the device.
  • Voltage Compatibility: Verify that the power supply voltage matches the specified working voltage range of the receiver module (DC 3.6V-24V).
  • Load Capacity: Do not exceed the maximum load capacity of 2A for the receiver module. Overloading can cause damage or fire.
  • Professional Installation: If you are unsure about any wiring procedures, consult a qualified electrician.

3. Package Contents

Depending on the purchased option, your package may include:

  • QIACHIP Digital Remote Controller (Transmitter)
  • QIACHIP Micro Switch Receiver Module (QA-R-011)
  • Quick connectors (may be included as a gift)

Please check your specific order details for the exact quantity of each component.

Different package options for QIACHIP remote control and receiver modules
Example of different package options available.

4. Technical Specifications

Receiver Module (QA-R-011)

ParameterValue
Working VoltageDC 3.6V ~ 24V
Maximum Load2A
Static Current<5 mA
Working Frequency433MHz (433.92MHz)
Reception Sensitivity<-108dBm
Size (L x W x H)25.5 mm x 13 mm x 5 mm
EncodingSupport coding format 1527 learning code
Modulation ModeASK (Superheterodyne)
Number of Stored Remote Controls≤ 5
Working ModesMomentary, Toggle, Latching, Time Delay
Learning StyleLearning Button
Working Temperature-20°C to 80°C

Remote Control (Transmitter)

ParameterValue
Operating Frequency433.92MHz
Power Source12V 23A Battery (not included)
MaterialPVC
Buttons2 or 4 buttons (depending on model)
Size55mm x 30mm (for 4-button model)
Operating Voltage12V
Operating Current12mA
Transmitting Power10mW
Modulation ModeASK (AM)
Encoding TypeLearning
Transfer DistanceUp to 80m (open space)
Remote Control Technical Specifications and Range
Overview of remote control technical specifications and estimated range.
Digital Remote Controller Features (8-button)
Features of the digital remote controller, including long-distance antenna, non-slip shell, indicator light, and large buttons.

5. Setup and Wiring

The receiver module is designed for easy integration into various circuits. Ensure all connections are secure and correctly polarized before applying power.

5.1. General Wiring Guidelines

  • IN+ / IN-: These are the power input terminals for the receiver module. Connect your DC 3.6V-24V power supply here.
  • OUT+ / OUT-: These are the output terminals that connect to your load (e.g., LED light, motor). The output voltage will be the same as the input voltage.
  • ANT: This is the antenna connection. Ensure it is properly connected for optimal range.
  • Learning Button: Used for pairing the remote control with the receiver module and setting operating modes.

5.2. Wiring Diagram for Light Control

Receiver Module Wiring Diagram for Light Control
Wiring diagram for controlling an LED light with the receiver module. Connect the LED light between OUT+ and OUT-.

5.3. Wiring Diagram for Electromagnet

Receiver Module Wiring Diagram for Electromagnet
Wiring diagram for controlling an electromagnet with the receiver module. Note the IN 4007 diode for protection.

Important: Do not perform wiring operations while the device is powered on.

6. Operating Modes

The receiver module supports several operating modes, which determine how the output behaves when a remote button is pressed.

  • Momentary Mode: The relay connects (output is ON) only while the remote button is pressed. Releasing the button disconnects the relay (output is OFF).
  • Toggle Mode: Pressing the remote button once connects the relay (output is ON). Pressing the same button again disconnects the relay (output is OFF).
  • Latching Mode: This mode typically uses two buttons. Pressing button A connects the relay (output is ON). Pressing button B disconnects the relay (output is OFF).
  • Time Delay Mode: Pressing the remote control button connects the relay. Upon releasing the button, the relay remains connected for a set duration (5s, 10s, 15s, or 20s) before automatically disconnecting.
  • Automatic Energize When Power On Mode: When power is supplied to the receiver module, the relay automatically connects (output is ON).

7. Learning and Clearing Codes

The receiver module needs to 'learn' the signal from your remote control to function. It can store up to 5 remote controls. If more than 5 are stored, the oldest stored remote will be overwritten.

7.1. Clearing the Code

To clear all stored remote control data from the receiver's memory:

  1. Press the receiver's learning button 8 times.
  2. The LED indicator on the receiver will flash 5 times, indicating that the clear function is completed.

After clearing, all remote controls must be re-paired with the receiver.

7.2. Setting Operating Modes and Learning Codes

Follow these steps to set a specific operating mode and pair a remote control:

  • Momentary Mode:
    1. Press the learning button on the receiver once. The LED will turn on, indicating it's in learning state.
    2. Press a button on your remote control. The receiver's LED will flash 3 times and then turn off, indicating successful learning.
  • Toggle Mode:
    1. Press the learning button on the receiver twice. The LED will turn on.
    2. Press a button on your remote control. The receiver's LED will flash 3 times and then turn off, indicating successful learning.
  • Latching Mode: (Requires two remote buttons, e.g., A for ON, B for OFF)
    1. Press the learning button on the receiver three times. The LED will turn on.
    2. Press button A on your remote control. The LED will flash 3 times.
    3. Press button B on your remote control. The LED will flash 3 times and then turn off, indicating successful learning.
  • Time Delay Mode:
    • Press the learning button 4 times for 5-second delay.
    • Press the learning button 5 times for 10-second delay.
    • Press the learning button 6 times for 15-second delay.
    • Press the learning button 7 times for 20-second delay.
    1. After selecting the desired delay by pressing the learning button, the LED will turn off.
    2. Press a button on your remote control. The LED will flash and turn off, indicating successful learning.
  • Automatic Energize When Power On Mode:
    1. Press and hold the receiver's learning button for more than 5 seconds until the indicator light flashes.
    2. The power-on setting is successfully configured. The device will now be in the powered-on state when power is applied.

8. User Tips

  • For optimal performance, it is recommended to use QIACHIP remote controls with this receiver module.
  • Ensure your remote control operates at 433MHz and uses an EV1527 IC chip for compatibility. It must also have a learning button to pair with the receiver.
  • The compact size of the receiver module (25.5mm x 13mm x 5mm) allows for discreet installation in various projects.
  • This system offers convenient remote control for a wide range of devices, allowing you to control multiple objects with a single remote.
  • Remember that the receiver can only store up to 5 remote controls. If you try to store a sixth, the first one learned will be deleted.

9. Troubleshooting

  • Remote control not responding:
    • Check if the remote control battery is dead and replace it if necessary.
    • Ensure the remote control is within the effective operating range (up to 80m in open space).
    • Verify that the remote control is paired correctly with the receiver module. Try re-learning the code.
    • Confirm that the remote control's frequency is 433MHz and it uses an EV1527 IC chip.
  • Receiver LED not flashing during learning:
    • Check the power supply to the receiver module.
    • Ensure the learning button is being pressed correctly.
  • Previously paired remote no longer works:
    • The receiver can store a maximum of 5 remote controls. If you have paired more than 5, the oldest one might have been overwritten. Clear all codes and re-pair your desired remotes.
  • Output not switching:
    • Check all wiring connections for looseness or incorrect polarity.
    • Ensure the load connected to the output does not exceed the maximum 2A current rating.

10. Warranty and Support

For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your seller or the manufacturer directly. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format may be available for download. Please refer to the product page or contact support for the link: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.