1. Introduction
The TILTA Full Camera Cage for BMCC 6K (Blackmagic Cinema Camera 6K Full Frame) is designed to provide protective armor for your camera body while expanding its functionality through various accessory mounting options. This cage minimizes wear over time and offers flexible configurations to suit different shooting needs.
2. Setup and Installation
Follow these steps to properly install and configure your TILTA Full Camera Cage:
-
Camera Installation: Secure the cage to your BMCC 6K camera body using the three-point mounting mechanism. This involves aligning the top plate with the 1/4″-20 thread on the top of the camera and using the two screws to connect the cage to the bottom of the camera. A multi-functional magnetic screwdriver is included for convenience.
Figure 2: Three-point locking mechanism for secure installation. 
Figure 3: Bottom mounting points and included magnetic screwdriver. -
Configuration Options: The cage features a detachable design, allowing for various setups:
- Full Cage: Provides maximum protection and mounting points.
- Half Cage: The right side arm module can be removed for lighter builds, ideal for gimbal use.
- L-Bracket: Achieved through the detachable design.
Figure 4: Detachable design for Full Cage, Half Cage, and L-Bracket configurations. -
Accessory Mounting: The cage offers multiple mounting points for accessories:
- Multiple 1/4"-20 threads with locating points.
- Multiple 3/8"-16 threads with locating points.
- Cold Shoe receivers.
- Arri compatible rosette.
- NATO Rail for NATO-based side handles and accessories.
Figure 5: Labeled mounting points for easy expansion. 
Figure 6: Side view showing shoulder strap slot, rosette, expansion threads, and Side Arm NATO. -
Baseplate Compatibility: The bottom plate features an Arca-Swiss Quick Release Baseplate, compatible with the DJI RS3 Pro gimbal for quick mounting.
Figure 7: Bottom plate with 1/4"-20 mounting points and Arca-Swiss compatibility. -
Battery Grip Compatibility: When using the Half Cage configuration, the bottom plate can be extended to support the Black Magic Design Battery Grip.
Figure 8: Half cage configuration supporting the Black Magic Design Battery Grip.
3. Operating the Camera Cage
Once installed, the camera cage provides a robust framework for your BMCC 6K, enhancing its versatility in various shooting scenarios:
- Handheld Operation: Utilize the cage's structure and optional top/side handles for stable handheld shooting.
- Stabilizer Mode: The Arca-Swiss compatible baseplate allows for quick mounting onto gimbals like the DJI RS3 Pro, providing a secure and balanced setup for stabilized footage.
Figure 9: Camera with cage mounted on a gimbal for stabilizer mode. - Tripod Mode: Easily mount the caged camera onto tripods or other support systems using the 1/4"-20 mounting points on the bottom plate.
Figure 10: Camera with cage mounted on a tripod for stable shots. - Accessory Integration: Attach monitors, microphones, lights, external SSDs, and other production tools to the various mounting points on the cage to customize your rig.
4. Maintenance
To ensure the longevity and optimal performance of your TILTA Full Camera Cage, follow these maintenance guidelines:
- Cleaning: Wipe the cage regularly with a soft, dry cloth to remove dust and fingerprints. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
- Screw Tightness: Periodically check all mounting screws, especially those securing the camera to the cage and any attached accessories, to ensure they remain tight. Loose screws can lead to instability or damage.
- Storage: When not in use, store the cage in a clean, dry environment, preferably in its original packaging or a protective case, to prevent scratches and damage.
5. Troubleshooting
If you encounter any issues with your camera cage, consider the following common solutions:
- Cage Not Fitting Securely: Ensure the camera is correctly seated within the cage and that all three mounting points (top and two bottom screws) are properly aligned and tightened. Refer to the installation steps in Section 2.
- Accessories Not Attaching: Verify that the accessory's mounting thread or mechanism matches the cage's mounting points (e.g., 1/4"-20, 3/8"-16, Cold Shoe, NATO). Check for any obstructions or debris in the threads.
- Instability on Gimbal/Tripod: Confirm that the baseplate is securely attached to the gimbal or tripod. Ensure the camera and cage are balanced if using a gimbal.
For persistent issues, please contact TILTA customer support.
6. Specifications
| Feature | Detail |
|---|---|
| Product Name | Full Camera Cage for BMCC 6K - Black |
| SKU | TA-T64-FCC-B |
| Model Number | TA-T64-A-B |
| Product Dimensions | 197.1 × 58 × 143.5 mm |
| Material | Aluminum alloy / Silicone |
| Net Weight | 146.5 g |
| Color | Black |
| Cage Type | Camera Cage |
| Brand Name | TILTA |
| Origin | Mainland China |
7. User Tips
- Battery Grip Compatibility: The bottom plate can be extended to support the Black Magic Design Battery Grip when using the Half Cage configuration, offering greater flexibility for power solutions.
- Gimbal Integration: The ARCA compatible bottom plate is specifically designed for quick mounting to gimbals like the DJI RS3 Pro, streamlining your setup for stabilized shots.
- Modular Design: Remember that the right side arm module is removable, allowing you to switch between a full cage and a lighter half cage setup depending on your specific shooting requirements, such as when using a gimbal.
- Accessory Note: Please note that the Battery Grip 15mm Rod Holder is NOT INCLUDED with the Full Camera Cage and must be purchased separately if needed.
8. Warranty and Support
For warranty information, technical support, or any inquiries regarding your TILTA Full Camera Cage, please contact TILTA Official Store directly. Keep your purchase receipt as proof of purchase for any warranty claims.
