1. Introduction
This manual provides instructions for the setup, operation, and maintenance of your new zap RMT-D250P or RMT-D249P infrared remote control. These remotes are designed as direct replacements for various Sony DVD and HDD recorder models, offering full functionality for your audio/video player.
Compatible Sony Models:
- Remote Control Models: RMT-D247P, RMT-D250P, RMT-D251P, RMT-D224P, RMT-D258P, RMT-D248P, RMT-D249P, RMT-D240A, RMT-D259
- DVD/HDD Recorder Models: RDR-HX1080, RDR-HX650, RDR-HX680, RDR-HX750, RDR-HX780 (RDR-HX780S), RDR-HX785, RDR-HX950, RDR-HX980 (RDR-HX980B), RDR-HXD1070, RDR-AT105, RDR-AT107, RDR-AT100, RDR-AT200, RDR-HDC100, RDR-DC90, RDR-DC100, RDR-DC205, RDR-DC305, RDR-DC500
2. Setup
2.1 Battery Installation
Your remote control requires batteries (not included) for operation. Please follow these steps to install them:
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards and lift it off.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery cover by sliding it back into place until it clicks securely.
No additional pairing or setup is typically required for this infrared remote control; it should function immediately with compatible devices once batteries are installed.
3. Operating Instructions
Point the remote control directly at your Sony DVD or HDD recorder. Ensure there are no obstructions between the remote and the device's infrared sensor. The effective operating range is typically 5-10 meters.
3.1 Button Layout Overview
The remote control features a standard layout for DVD/HDD recorder functions. While specific button labels may vary slightly between the RMT-D250P and RMT-D249P models, the core functionality remains consistent.
Common buttons and their functions include:
- Power (I/O): Turns the device on or off.
- HDD / DVD: Switches between Hard Disk Drive and DVD modes.
- Number Pad (0-9): For direct track/chapter selection or inputting numbers.
- PROG (+/-): Changes channels or navigates program lists.
- INPUT: Selects input sources.
- CLEAR / TV/DVD: Clears entries or switches TV/DVD control.
- SUBTITLE / ANGLE / PLAY MODE / ZOOM: Controls playback options.
- TOP MENU / SYSTEM MENU / TITLE LIST / GUIDE / INFO: Accesses various menu and information displays.
- Navigation (Up, Down, Left, Right, ENTER): For menu navigation and selection.
- RETURN / DISPLAY: Returns to previous screen or displays on-screen information.
- Playback Controls (Play, Pause, Stop, Fast Forward, Rewind, Skip): Standard media playback functions.
- REC / REC STOP / HDD/DVD REC MODE / DUB: Recording and dubbing functions.
- TV Controls (TV I/O, VOL +/-, CH +/-): Basic television control.
4. Maintenance
4.1 Cleaning
To clean your remote control, gently wipe it with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or abrasive materials, as these can damage the remote's surface or internal components.
4.2 Battery Care
- Replace batteries when the remote's response becomes sluggish or stops working.
- Always replace both batteries at the same time with new ones of the same type (AAA).
- If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage.
- Dispose of used batteries according to local regulations.
5. Troubleshooting
If you experience issues with your remote control, try the following steps:
- Remote not responding:
- Check if the batteries are correctly inserted and have sufficient charge. Replace them if necessary.
- Ensure there is a clear line of sight between the remote control and the infrared sensor on your DVD/HDD recorder.
- Verify that the remote is pointed directly at the device.
- Limited range:
- Replace the batteries with fresh ones.
- Ensure no strong light sources (like direct sunlight or bright fluorescent lights) are interfering with the IR signal.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | zap (Replacement for Sony) |
| Models | RMT-D250P, RMT-D249P |
| Condition | New |
| Material | ABS |
| Color | Black |
| Wireless Communication | IR (Infrared) |
| Frequency | 433 MHz |
| Channel | 1 |
| Wireless Range | 5-10 meters |
| Batteries Required | 2 x AAA (not included) |
| Package Weight | 0.1 kg |
| Package Dimensions (L x W x H) | 27 cm x 10 cm x 3 cm |
7. User Tips
- For optimal performance, ensure fresh batteries are always used.
- Keep the remote control away from direct sunlight or heat sources to prolong its lifespan.
- If you have multiple IR devices, ensure you are pointing the remote accurately to avoid unintended commands to other electronics.
8. Warranty and Support
This product is typically covered by a standard manufacturer's warranty against defects in materials and workmanship. For any issues, questions, or support needs, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
