1. Product Overview
The EC-01G is an advanced NB-IoT and GPS module developed by Ai-Thinker, designed for a wide range of IoT applications requiring reliable cellular connectivity and precise positioning. The module integrates two main chip solutions: the EC616S for NB-IoT communication and the AT6558R for multi-mode satellite positioning.
The EC-01G-Kit is a development board designed to facilitate the use of the EC-01G module. It includes a CH340C serial port chip and a SIM card holder for easy integration and development.
Key Features:
- 5G NB-IoT Connectivity: Supports 3GPP Rel14 NB-IoT standard with ultra-low power consumption.
- Multi-mode Positioning: Integrates GPS, China's Beidou Satellite Navigation System (BDS), and Russia's GLONASS for accurate multi-system joint positioning.
- Integrated Components: RF transceiver, PA, RF filter, antenna switch, and power management.
- Communication Protocols: Supports TCP, MQTT, and HTTP protocols.
- Low Power Modes: Excellent power consumption performance in PSM, DRX, and eDRX modes.
- Flexible Interfaces: Multiple GPIOs, UART, ADC, I2C, PWM, and Timers.
- Security Features: Hardware encryption/decryption (AES, SHA), secure boot, flash encryption, true random number generator.
2. Specifications
EC-01G Module Main Parameters
| Parameter | Description |
|---|---|
| Model | EC-01G |
| Package | SMD-54 |
| Size | 19.2*18.8*2.8(±0.2)MM |
| Antenna | External antenna (NB: SMA, GPS: IPEX) |
| Spectrum Range | Band3, Band5, Band8 |
| Operating Temperature | -40 ℃ ~ 85 ℃ |
| Storage Environment | -40 ℃ ~ 125 ℃, < 90%RH |
| Power Supply Range | 3.3V ~ 4.5V, current >500mA |
| Support Interface | SSP/UART/I2C/PWM/ADC/GPIO |
| Serial Port Rate | Support 110 ~ 4608000 bps, default 9600 bps |
| Flash | 4MB NOR Flash |
| IO Quantity | 12 (contain TX0\RX0 TX1\RX1) |
| Satellite Positioning | GPS, BDS, GLONASS |
| Bluetooth | Nonsupport |
| Security | AES/SHA |
| Sleep Mode (PSM) | 0.8uA (Single Module) |
| Standby Mode (DRX) | 110uA (Single Module) |
| Full Load Mode (TX: 23dBm) | 240mA (Single Module) |
EC-01G-Kit Development Board Main Parameters
| Parameter | Description |
|---|---|
| Development Board Model | EC-01G-Kit |
| Adaptive Module | EC-01, EC-01G |
| Packaging | DIP-14 (2.54mm spacing standard row needle) |
| Size | 37.6*32.5(±0.2)mm |
| Antenna Form | NB: External SMA antenna, GPS: external IPEX antenna |
| Working Temperature | -40 ℃ ~ 85 ℃ |
| Storage Environment | -40 ℃ ~ 125 ℃, < 90%RH |
| Kit Supply District | USB 5V or pin 3.3V |
| IO Quantity | 12 (contain TX0\RX0 TX1\RX1) |
| Kit Pin | 14 |
3. Setup and Installation
3.1 Module and Kit Dimensions


3.2 Pin Definitions (EC-01G Module)

The EC-01G module has a total of 54 interfaces. The pin function definition table below details each interface.
| No. | Name | Function Description |
|---|---|---|
| 1 | I2C_SCL | GPIO3 |
| 2 | I2C_SDA | GPIO2 |
| 3 | RX0 | GPIO8/UARTO_RXD |
| 4 | TX0 | GPIO9/UARTO_TXD |
| 5 | IO10 | GPIO10 |
| 6 | IO11 | GPIO11 |
| 7 | GND | Ground Connection |
| 8 | 3V3 | 3.3V Power Supply |
| 9 | RX1 | GPIO14/UART1_RXD |
| 10 | TX1 | GPIO15/UART1_TXD |
| 11 | ADC4 | ADC Channel AIO4 |
| 12 | ADC2 | ADC Channel AIO2 |
| 13 | SDA | GPIO2 |
| 14 | SCL | GPIO3 |
| 3-8 | NC | Empty |
| 9 | POWER_KEY | Wakeup |
| 10 | GND | Grounded |
| 11 | V_BAT | Power input |
| 12 | V_BAT | Power input |
| 13-14 | NC | Empty |
| 15 | ADC4 | ADC Channel AIO4 |
| 16 | ADC2 | ADC Channel AIO2 |
| 17 | NC | Empty |
| 18 | RESET | RESETn |
| 19-26 | NC | Empty |
| 27 | GND | Grounded |
| 28 | GPS_RF | GPS RF port |
| 29 | GND | Grounded |
| 30-36 | NC | Empty |
| 37 | IO13/TX | UART1_TXD |
| 38 | IO12/RX | UART1_RXD |
| 39 | SIM0_DATA | USIM_UIO/SIM card IO |
| 40 | VDD_SIM0_3.3V | Output of LDO SIM 1.8V/3.3V |
| 41 | SIM0_CLK | USIM_UCLK/SIM card clock |
| 42 | SIM0_RST | USIM_URSTn/SIM card reset |
| 43 | NC | Empty |
| 44 | GND | Grounded |
| 45 | NB_RF | NB RF port |
| 46 | GND | Grounded |
| 47 | UART0_RST | GPIO6/UART0_RSTn |
| 48 | UART0_CTS | GPIO7/UART0_CTSn |
| 49 | UART0_RXD | GPIO8/UART0_RXD |
| 50 | UART0_TXD | GPIO9/UART0_TXD |
| 51 | UART1_RST | GPIO10/UART1_RSTn |
| 52 | UART1_CTS | GPIO11/UART1_CTSn |
| 53 | UART1_RXD | GPIO14/UART1_RXD |
| 54 | UART1_TXD | GPIO15/UART1_TXD |
3.3 Power Supply
- EC-01G Module: Requires a supply voltage of 3.3V to 4.5V with a current greater than 500mA.
- EC-01G-Kit Development Board: Can be powered via USB (5V) or directly through the 3.3V pin.
3.4 Antenna Connection
- NB-IoT Antenna: Connect an external SMA antenna to the designated NB antenna port.
- GPS Antenna: Connect an external IPEX antenna to the designated GPS antenna port.
3.5 SIM Card Installation (EC-01G-Kit)
The EC-01G-Kit development board includes a SIM card holder. Insert a compatible Micro SIM card (12*15mm) into the holder for NB-IoT communication.
4. Operating Instructions
4.1 Indicator Lights and Buttons (EC-01G-Kit)

The EC-01G-Kit features three indicator lights: "NB" (Network status indicator), "GPS" (GPS status indicator), and "LINK" (Server connection indicator), along with an RST (Reset) button. Their functions are detailed below:
| Indicator Light or Button | Network State | LED Status or Button Function | Remark |
|---|---|---|---|
| "NB" Indicator (Network status indicator) | Connected | 1s Flashing once | Turn on the indicator mode (AT+ECLEDMODE=1) |
| Search the Internet | 0.5s Flashing once (quick flashing) | ||
| Network disconnection | Extinguish | ||
| Ununited | 0.5s Flashing once (quick flashing) | ||
| "GPS" Indicator | Not open | Extinguish | / |
| Enabled (Not located) | Slow flash | / | |
| Has been positioning | Light-Form | / | |
| "LINK" Indicator | Failed to connect to server | Extinguish | / |
| Connected Server | Light-Form | Connect to server and ID=0 | |
| RST Key | / | Resetting Key | / |
4.2 Communication and Protocols
- The module supports standard communication protocols including TCP, MQTT, and HTTP(S).
- Serial communication is available via UART interfaces, with a default baud rate of 9600 bps, configurable up to 4608000 bps.
- For detailed AT command sets and programming guides, refer to the official Ai-Thinker documentation.
4.3 Positioning Functionality
- The integrated AT6558R chip enables multi-system joint positioning using BDS, GPS, and GLONASS satellites.
- Ensure the GPS antenna is properly connected and has a clear view of the sky for optimal positioning accuracy.
5. Maintenance
- Handling: Handle the module and development board with care to avoid physical damage to components and connectors.
- Environment: Operate and store the device within the specified temperature and humidity ranges (-40 ℃ ~ 85 ℃ operating, -40 ℃ ~ 125 ℃ storage, < 90%RH).
- Cleaning: Keep the module and board free from dust and moisture. Use a soft, dry cloth for cleaning. Avoid using liquids or harsh chemicals.
- Power Supply: Always use a stable power supply within the specified voltage range to prevent damage.
6. Troubleshooting
- No Power: Ensure the power supply is correctly connected and provides the required voltage and current. Check for loose connections.
- NB Indicator Not Flashing/Connected: Verify SIM card insertion and activation. Check antenna connection. Ensure you are in an area with NB-IoT network coverage.
- GPS Indicator Not Lighting Up/No Fix: Ensure the GPS antenna is connected and has an unobstructed view of the sky. Allow sufficient time for satellite acquisition.
- Communication Issues: Double-check serial port settings (baud rate, parity, data bits, stop bits). Verify wiring connections to external devices.
- Module Not Responding: Try pressing the RST button on the development board to reset the module.
7. User Tips
- Start with the Kit: If you are new to NB-IoT or GPS modules, begin with the EC-01G-Kit development board. It simplifies initial setup and testing with its integrated serial chip and SIM card holder.
- Consult Documentation: Always refer to the latest official documentation and AT command reference from Ai-Thinker for advanced configurations and programming.
- Power Management: Utilize the module's low-power modes (PSM, DRX) to optimize battery life in power-sensitive applications.
- Antenna Placement: For best GPS performance, ensure the antenna is placed in an open area with a clear view of the sky. For NB-IoT, ensure the antenna is suitable for the operating bands.
- Software Development: Leverage the Open-CPU feature and CMSIS architecture for custom firmware development. The module supports mainstream cloud services, simplifying integration into IoT platforms.
8. Warranty and Support
For technical support, warranty information, or further assistance, please contact the seller or manufacturer directly. Keep your purchase records for any warranty claims.