AOHEWEI EA077

Contents

AOHEWEI Wireless LED Magnetic Trailer Tail Lights

Model: EA077

1. Introduction

The AOHEWEI Wireless LED Magnetic Trailer Tail Light Kit provides a cable-free lighting solution for various vehicles including trucks, trailers, vans, caravans, and lorries. Designed for ease of use and quick installation, these lights offer essential functions such as brake, tail, indicator, license plate, and reflector lights, all powered by rechargeable batteries and controlled wirelessly via a 7-pin transmitter.

AOHEWEI Wireless LED Magnetic Trailer Tail Light Kit in its carrying case

Figure 1: AOHEWEI Wireless LED Magnetic Trailer Tail Light Kit

2. Box Contents

Please check the package contents to ensure all items are present:

  • 1 x Left Rear Light
  • 1 x Right Rear Light
  • 1 x 7-pin Plastic Plug with Transmitter
  • 1 x USB Rechargeable Cable
  • 1 x Cigarette Lighter Charger Adapter
  • 1 x User Manual
All components of the AOHEWEI Wireless LED Magnetic Trailer Tail Light Kit laid out

Figure 2: Kit Components

3. Specifications

FeatureSpecification
Transmitter Input Voltage12V
Light Input VoltageDC 5V (USB)
Operating Frequency2.4 GHz
Radio Range0m - 20m
Battery Capacity2000mAh
Charging Time2.5 hours
Operating TimeUp to 8 hours
Waterproof LevelIP65
Operating Temperature-25°C ~ 50°C
Item Weight1.4kg

3.1. Functions

  • Brake Light
  • Tail Light
  • Direction Indicator Light
  • License Plate Light
  • Reflector

3.2. Dimensions

Diagram showing the dimensions of the trailer tail light: 10.5cm width, 10cm height, 5.3cm total depth, 2.8cm light depth, 7cm magnetic base diameter.

Figure 3: Light Dimensions

3.3. Application

The magnetic LED radio light kit is designed for versatile use on various vehicles, including:

  • Trucks
  • Trailers
  • Vans
  • Caravans
  • Tractors
  • Other compatible vehicles
Wireless LED trailer lights attached to the rear of a caravan

Figure 4: Lights in Application on a Caravan

4. Setup Instructions

4.1. Initial Charging

  1. Before first use, fully charge both LED tail lights using the provided USB rechargeable cable and either a USB power source or the cigarette lighter charger adapter.
  2. The charging time is approximately 2.5 hours.

4.2. Attaching the Lights

  1. Ensure the magnetic bases of the lights are clean and free of debris.
  2. Position each light firmly onto a suitable metallic surface at the rear of your vehicle or trailer. The strong magnets will hold them in place.
  3. Verify that the anti-scratch rubber caps on the magnets are intact to protect your vehicle's paintwork.
Close-up of the magnetic base of the trailer tail light

Figure 5: Magnetic Attachment

4.3. Connecting the Transmitter

  1. Locate the 7-pin trailer socket on your towing vehicle.
  2. Insert the provided 7-pin plastic plug transmitter into the vehicle's trailer socket.
  3. The transmitter will establish a wireless connection with the tail lights automatically. The new version of the transmitter has the antenna built into the 7-pin trailer plug.
Diagram illustrating the wireless connection between the 7-pin transmitter and the trailer tail lights, showing 12V power, 2.4GHz frequency, and 0-20m range.

Figure 6: Wireless Connection Diagram

5. Operating Instructions

Once the lights are charged and the transmitter is connected, the lights will synchronize with your vehicle's signals:

  • Brake Light: Activates when the vehicle's brakes are applied.
  • Tail Light: Illuminates when the vehicle's headlights or parking lights are on.
  • Direction Indicator Light: Flashes when the vehicle's turn signals are activated.
  • License Plate Light: Provides illumination for the license plate (if applicable to mounting).
  • Reflector: Passive reflection for added visibility.

The wireless design ensures a clean, cable-free operation, allowing for quick attachment and detachment between different vehicles.

Two wireless LED trailer lights illuminated, showing tail and brake light functions

Figure 7: Illuminated Tail Lights

6. Maintenance

6.1. Charging the Lights

To ensure optimal performance, regularly charge the tail lights. Use the provided USB cable and either a standard USB charger or the cigarette lighter adapter. A full charge takes approximately 2.5 hours and provides up to 8 hours of operating time.

Close-up of the charging port on the side of the trailer tail light

Figure 8: Charging Port

6.2. Cleaning and Care

  • The lights are IP65 waterproof, meaning they are protected against dust and low-pressure water jets. They can be cleaned with a damp cloth. Avoid using harsh chemicals or abrasive materials.
  • Periodically inspect the magnetic bases and their rubber caps. Ensure the caps are in good condition to prevent scratching your vehicle's surface.
Magnetic base of the light with a protective rubber cap

Figure 9: Magnetic Base with Protective Cap

7. Troubleshooting

  • Lights not responding: Ensure both tail lights are fully charged. Verify the 7-pin transmitter is securely plugged into the vehicle's trailer socket. Check that the vehicle's electrical system is providing power to the trailer socket.
  • Intermittent connection: Ensure the lights are within the 0-20m radio range of the transmitter. Avoid obstructions that might interfere with the 2.4 GHz wireless signal.
  • Lights not illuminating correctly: Confirm the vehicle's signals (brake, turn, tail) are functioning properly. If only one light is affected, try swapping positions to determine if the issue is with the light or the signal.
  • Compatibility: These lights are designed for 12V/24V systems. Ensure your vehicle's trailer socket provides the correct voltage.

8. User Tips

  • Always ensure the protective rubber caps on the magnetic bases are in place before attaching the lights to your vehicle to prevent scratches.
  • For optimal performance and longevity, fully charge the lights before each extended use, especially if they have been stored for a period.
  • Take advantage of the cable-free design for quick and easy transfer between different trailers or vehicles.
  • While the lights are waterproof (IP65), avoid submerging them in water for prolonged periods.

9. Warranty and Support

For any questions, technical assistance, or support regarding your AOHEWEI Wireless LED Magnetic Trailer Tail Lights, please refer to the included user manual or contact customer service. We are committed to providing support for our products.

Customer service representative with headset

Figure 10: Customer Support

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.